Guest Editorial

The extreme high speed of change in the area of information technology creates a new demand for a process of continues learning and relearning in the workplaces but also among the public as a whole. There is need for a deeper crossdisciplinary and interdisciplinary understanding of the effects of this extreme demand for learning and relearning, both on us as individuals, on public and private organization and on the society as a whole. Information technology provides to some extent possible solutions to the problems it creates. Consequently, web based learning is also expanding with an accelerating speed. But this new form of learning is not to the same extent backed up by a fast growing research, in areas like on-the job-learning, workplace pedagogics, 'competence ergonomics', etc. But there are a number of very good exceptions like the Knowledge Media Institute of the Open University, and also a number of newly established facilities like the network university in the north of Sweden, the Mid Sweden University. In this special issue these types of problems are discussed, including those where the emphasis lies in creating rational and effective methods for web-based training and learning. The following was put forward in the invitation to a particular target group for this special issue.     

Breakage behaviour of spherical granulates by compression

This paper describes the deformation and breakage behaviour of granulates in single particle compression test. Three industrial spherical granulates—γ-Al₂O₃, the synthetic zeolite Köstrolith^® and sodium benzoate (C₆H₅COONa) were used as model materials to study the mechanical behaviour from elastic to plastic range. The elastic compression behaviour of granulates is described by means of force-displacement curves, by application of Hertz-Huber contact theory and continuum mechanics. An elastic-plastic contact model was proposed to describe the deformation behaviour of elastic-plastic granules. The effects of granulate size and stressing velocity on the breakage force and contact stiffness during elastic and elastic-plastic displacement are examined. It is shown that the zeolite granulates with elastic-plastic behaviour have viscous properties as well. Breakage mechanisms of granulates during elastic, elastic-plastic and plastic deformation are also explained. The breakage probability is approximated by Weibull distribution function. The behaviour of the granulate during compression under the repeated loading-unloading conditions was investigated.     

Breakage probability of irregularly shaped particles

The investigation of breakage probability by compression of single particles was carried out. The spherical glass particles and irregularly shaped particles of NaCl, sugar, basalt and marble were subjected to a breakage test. The breakage test includes the compression up to breakage of 100 particles to obtain the distribution of the breakage probability depending on the breakage force or compression work. The breakage test was conducted for five particle size fractions from each individual material, at two stressing rates. Thus obtained 50 breakage force distributions and corresponding 50 breakage work distributions were fitted with log-normal distribution function.Usually, the breakage probability distribution can be found by means of stress or energy approach. The first one uses the stress to calculate the breakage probability distribution. The second approach uses the mass-related work done to break the particle. We prefer to use the breakage force and energy as essential variables. The correlation between the force and energy at their breakage points is obtained by integrating the characteristic force–displacement curve, i.e. the constitutive function of elastic–plastic mechanical behavior of the particle. The irregularly shaped particle is approximated by comparatively “large” hemispherical asperities. In terms of elastic–plastic deformation of the contacting asperities with the plate, a transition from elastic to inelastic deformation behavior was considered. Thus, one may apply the model of soft contact behavior of comparatively stiff hemispheres. Based on this model a relationship between the breakage force distributions and corresponding energy distributions was analyzed. Every tested material exhibits a linear relationship between average breakage energy and average breakage force calculated for every size fraction.For future consideration both force and energy distributions were normalized by division by average force or energy, consequently. The relationship between the fit parameters of normalized energy distribution and corresponding fit parameters of normalized force distribution was established. The mean value and standard deviation of normalized force distribution can be found from mean value and standard deviation of normalized energy distribution by means of system of two linear equations. The coefficients of those linear equations remain the same for all of the above tested materials; particle size fractions and stressing rates. As a result the simple transformation algorithm of distributions is developed. According to this algorithm the force distribution can be transformed into energy distribution and vice versa.     

An adsorptive transfer technique coupled with brdicka reaction to reveal the importance of metallothionein in chemotherapy with platinum based cytostatics

The drugs based on platinum metals represent one of the oldest, but also one of the most effective groups of chemotherapeutic agents. Thanks to many clinical studies it is known that resistance of tumor cells to drugs is a frequent cause of chemotherapy failure. With regard to platinum based drugs, multidrug resistance can also be connected with increased expression of low-molecular weight protein metallothionein (MT). This study aimed at investigating the interactions of MT with cisplatin or carboplatin, using the adsorptive transfer technique coupled with differential pulse voltammetry Brdicka reaction (AdTS DPV Brdicka reaction), and a comparison of in vitro results with results obtained in vivo. The results obtained from the in vitro study show a strong affinity between platinum based drugs and MT. Further, we analyzed extracts of neuroblastoma cell lines treated with cisplatin or carboplatin. It is clear that neuroblastoma UKF-NB-4 cisplatin-resistant and cisplatin-sensitive cell lines unlikely respond to the presence of the platinum-based cytostatics cisplatin and carboplatin. Finally, we determined the level of MT in samples from rabbits treated with carboplatin and patients with retinoblastoma treated with the same drug.     

Arylethyne Bromoboration–Negishi Coupling Route to E‐ or Z‐Aryl‐Substituted Trisubstituted Alkenes of ≥98% Isomeric Purity. New Horizon in the Highly Selective Synthesis of Trisubstituted Alkenes

The hitherto unprecedented palladium‐catalyzed cross‐coupling of (Z)‐β‐bromo‐β‐arylethenylboranes can be made to proceed satisfactorily through (1) the use of highly catalytically active bis(tri‐tert‐butylphosphine)palladium or dichloro[N,N‐bis‐(2,6‐diisopropylphenyl)imidazol‐2‐yl](m‐chloropyridine)palladium and (2) conversion of the dibromoboryl group to the (pinacol)boryl group. Thus, a wide variety of carbon groups can be used to substitute bromine in ≥98% stereo‐ and regioselectivity, while suppressing the otherwise dominant β‐debromoboration. Together with the alkylethyne‐based protocols, the alkyne bromoboration–Negishi coupling tandem process has emerged as the most widely applicable and highly selective route to trisubstituted alkenes including those that are otherwise difficult to access.     

A High-Resolution TEM/EELS Study of the Effect of Doping Elements on the Sliding Mechanisms of Sputtered WS2 Coatings

It has been shown many times that cosputtering low-friction coatings of molybdenum disulfide (MoS₂) and tungsten disulfide (WS₂) with other elements can improve the structural, mechanical, and tribological properties. To achieve the lowest friction, MoS₂ or WS₂ should be doped with element(s) improving the hardness and density of the coatings. On the other hand, such elements, or their compounds, should not be present in the outermost molecular layers at the sliding interface. This article suggests that there are important differences between how MoS₂ and WS₂ coatings respond to or react with doping elements, despite the almost identical structure and behavior of the undoped materials. Two systems have been investigated by high-resolution transmission electron microscopy (HRTEM) and scanning TEM (STEM) electron energy loss spectroscopy (EELS), W-S-C-Cr and W-S-C-Ti, and showed significant amounts of oxides, which typically formed a layer just underneath the crystalline WS₂ top layer. Further, carbon was almost completely absent in the tribofilms, despite the fact that the as-deposited coatings contained as much as 40–50 at% C. An interesting observation here is that WS₂ basal planes surround or embed Fe wear particles, suggesting a relatively strong adhesion or a Fe-S chemical bonding between iron/steel and WS₂. The result of this is that the wear particles become pacified and remain in the contact as low-friction material.     

Prediction of sensory quality by near infrared reflectance analysis of frozen and freeze dried green peas (Pisum sativum)

Frozen, green peas (Pisum sativum L ) of different varieties and different levels of maturity were evaluated by sensory analysis using a panel of ten trained judges. Two texture variables (hardness and mealiness) and four flavour variables (pea flavour, sweetness, fruity flavour, off flavour) were considered. Near infiared reflectance ( N I R ) analysis was performed with the same material, on both the fiozen and fieeze dried peas. The N I R instrument was calibrated to predict the sensory variables using the multivariate analytical method of principal component regression. Tenderometer readings of the same peas were also calibrated to predict the sensory variables. N I R analysis on the fieeze dried peas showed relative ability of prediction (RAP) values for the sensory variables which were higher than those for the tenderometer readings. The sensory attributes pea flavour and hardness were predicted with higher RAP values by tenderometer readings than by N I R analysis on fiozen peas. For the rest of the attributes, N I R analysis on fiozen peas gave higher RAP values than tenderometer readings. N I R generally gave high RAP values, and this tentative study suggests that N I R analysis could be a useful tool in instrumentally assessing the quality of frozen peas.     

Comprehensive analysis of major and minor chlorogenic acids and lactones in economically relevant Brazilian coffee cultivars

Coffee is the most consumed beverage in the world and a significant source of phenolic compounds, particularly chlorogenic acids (CGA). During coffee roasting, some CGA are partially transformed into chlorogenic acid lactones (CGL). Both CGA and CGL are important compounds for flavor and potentially beneficial to human health. In the present study, using LC–MS and synthetic standards, we investigated major and minor CGA and CGL isomers in green and roasted samples of economically relevant Brazilian Coffea arabica and Coffea canephora coffee cultivars. For the first time, in addition to nineteen previously identified CGA and CGL, 1-feruloylquinic acid, 1-feruloylquinic lactone and 3,4-diferuloylquinic acid were quantified in C. arabica and C. canephora, the contents of 3- and 4-p-coumaroylquinic lactones were reported in C. canephora and 3,4-di-p-coumaroylquinic acid was identified in C. arabica. Despite their low concentrations, the implications of these findings for flavor, cup quality and the biological properties of coffee merit further investigation.     

THE INFLUENCE OF PRESSURE AND TEMPERATURE ON THE KINETICS OF VACUUM DRYING OF KETOPROFEN

This paper explores the influence of temperature and pressure on drying kinetics of 2-(3-benzoylphenil propionic acid) ketoprofen, in a vacuum dryer on laboratory scale, Experimentally determined relations between moisture content and drying rate vs time, were approximated with an exponential model. Model parameters were correlated with drying conditions (temperature, pressure) and defined by functions of their potentions.

From an energy balance of the process, a mathematical model for simulating dependence of sample temperature vs drying time, and moisture content of material, has been developed.

Simulation of the drying kinetics and sample temperature, by use of those functional dependencies shows good agreement with experimental results.