高能球磨FeCo+MnO的结构与磁性研究

用高能球磨采用两种方案制备了FeCo MnO体系,并用X射线衍射和振动样品磁强计对其结构和磁性质做了分析.发现采用直接氧化Mn而得到MnO的方法,所得体系的MnO较纯;而通过分解MnCO3得到MnO的体系,MnO纯度较低,有较多Mn3O4杂质,两种方法制备的FeCo MnO体系的矫顽力和剩磁比都比单纯FeCo体系的增加很多,且前一种方法比后一种方法制备的FeCo MnO体系的矫顽力和剩磁比较大.然后研究了球磨时间及退火处理对FeCo MnO体系矫顽力及剩磁比的影响,发现球磨时间为120h体系的矫顽力和剩磁比最大;经过退火处理后,体系的矫顽力和剩磁比都有较大幅度的增加.     

热老化聚丙烯薄膜宏观力学性能及微观结构的研究

通过对热老化处理的聚内稀薄膜进行X射线衍射实验.对测得的实验数据采用X射线衍射线形分析理论处理,同时对热老化聚丙烯薄膜进行拉仲形变测量,得到材料的力学性质和微晶尺寸及内部点阵畸变的变化规律.从而将热老化聚丙烯材料宏观性质变化与微观结构联系起来,找出材料聚集态精细结构随老化时问而改变的微观规律.     

黑白电视机的电磁兼容设计

本文结合我厂μPC三片机的设计布局,探讨黑白电视机电路的电磁兼容设计。通过理论计算,提出中放屏蔽材料选择的理论依据。     

转炉溅渣层与镁碳砖炉衬的结合机理

通过对生产现场带有溅渣层的转炉炉衬残砖和试验室小型坩埚溅渣试验结果进行矿相显微结构分析、研究，确定了溅渣层的矿相组成、溅渣层与ＭｇＯ－Ｃ砖结合区域的矿相结构及坩埚溅渣层自上而下的矿相分布规律，并根据矿相结构分析中观察到的烧结层、结合层和溅渣层３个区域，提出了溅渣层与镁碳砖炉衬的结合机理为化学结合、机械镶嵌与化学烧结结合及冷凝结合３种形式。     

与性能相关的容错计算系统可靠性指标

对于某些容错计算系统，由于成功与故障之间没有明确的界限，用传统的可靠性指标难以准确地评价其容错性能，为此一些学者提出了若干与性能相关的可靠性指标。本文将这些指标概括成三类（即基于瞬时性能的指标、基于累积收益的指标和率模可靠性指标）加以介绍，并简要介绍了它们的求解方法。     

Intraocular concentrations of chemotherapeutic agents after systemic or local administration

OBJECTIVES: To investigate the concentrations of carboplatin and etoposide achieved in the aqueous and vitreous humors after intravenous infusion in nonhuman primates, and to investigate whether local administration of carboplatin might result in higher concentrations in the vitreous humor. METHODS: Macaca fascicularis primates were treated with 1 of 3 regimens: (1) intravenous carboplatin (18.7 mg/kg), etoposide (5 mg/kg), and vincristine sulfate (0.05 mg/kg), (2) peribulbar carboplatin (10 mg/mL), or (3) episcleral balloon carboplatin (10 mg/mL). Concentrations of chemotherapeutic agents were measured in the plasma and in the aqueous and vitreous humors. RESULTS: No measurable amount of etoposide was detected in the aqueous or vitreous humor after intravenous administration. Mean measured peak vitreous concentration of carboplatin after intravenous administration was 0.31 microg/mL, which was 1% of the peak plasma value. Mean measured peak vitreous concentrations of carboplatin after peribulbar or episcleral balloon administration were 2.38 microg/mL and 2.95 microg/mL, respectively, which represent 7.68- and 9.52-fold increases over the concentration achieved after intravenous administration. No serious toxic effect was observed in any animal. CONCLUSIONS: Peribulbar and episcleral balloon administration of carboplatin seemed to be safe and resulted in higher vitreous concentrations than intravenous administration in this model. These results suggest that these alternate routes of delivery should be explored in children with vitreous seeding of retinoblastoma.     

本钢烧结矿冷却及其余热回收的试验研究

从烧结矿冷却并回收其余热的角度出发，介绍了利用烧结机尾落矿空间，采用喷吹空气装置对烧结矿进行冷却的小型模拟试验，从测出的结果来看，有可能成为一种新的烧结矿冷却方式。     

In situ synthesis of TiC-Al (Ti) nanocomposite powders by thermal plasma technology

A novel processing technology was developed to investigate in situ synthesis of TiC-Al (Ti) nanocomposite powders by thermal plasma technology. Thermodynamic analysis was performed to predict possible starting materials and synthesizing conditions of TiC-Al (Ti) nanocomposite powders. A mathematical model was developed to describe temperature profile and velocity distribution in the reactor. The model is applied to optimize feeding rate, input power, and other processing parameters of TiC-Al (Ti) nanocomposite powders by thermal plasma technology, and to predict which materials can be used as starting materials. This paper emphasizes the investigation of the effect of feeding rate, input power, mole ratio, and other process parameters on synthesis of TiC-Al (Ti) nanocomposite powders by thermal plasma technology. The experimental results showed that TiC-Al (Ti) nanocomposite powders can be synthesized in situ by thermal plasma technology, and the average size of TiC-Al (Ti) nanocomposite powders was less than 100 nm.     

单嘴精炼装置真空室内卷渣水模型研究

本文针对长城特殊厂单嘴精炼装置进行了真空室内加渣精炼的卷渣水模型研究。在试验的基础上，首先讨论了真空室内卷渣现象的工艺过程，然后进一步得出了临界吹气量的表达式。研究结果为工业性生产进一步提高钢的质量打下了基础。     

Nonparametric change detection and estimation in large-scale sensor networks

The problem of detecting changes in the distribution of alarmed sensors is considered. Under a nonparametric change detection framework, several detection and estimation algorithms are presented based on the Vapnik-Chervonenkis (VC) theory. Theoretical performance guarantees are obtained by providing error exponents for false-alarm and miss detection probabilities. Recursive algorithms for the efficient computation of test statistics are derived. The estimation problem is also considered in which, after detection is made, the location with maximum distribution change is estimated.