HVEM study of crack-tip dislocations in Si crystals prepared by FIB and twin-blade cutting method

Crack-tip dislocations in silicon crystals have been examined by using high-voltage electron microscopy. Cracks were introduced by the Vickers indentation method at room temperature and the indented specimens were annealed at high temperatures to induce dislocations around crack tips under the presence of residual stress due to the indentation. A selected area around a crack tip was thinned by a focused ion beam (FIB) technique. Specimens were thinned in advance by a twin-blade cutting (TBC) method, which is a simple cutting process for saving FIB machine time. A combination of FIB and TBC can be a useful thinning procedure for the efficient preparation of transmission electron microscopy specimens. Characteristic dislocation structures were observed around the tip of a crack, aiding the elucidation of dislocation processes, which is essential to increase the fracture toughness of materials.     

Information geometry of turbo and low-density parity-check codes

Since the proposal of turbo codes in 1993, many studies have appeared on this simple and new type of codes which give a powerful and practical performance of error correction. Although experimental results strongly support the efficacy of turbo codes, further theoretical analysis is necessary, which is not straightforward. It is pointed out that the iterative decoding algorithm of turbo codes shares essentially similar ideas with low-density parity-check (LDPC) codes, with Pearl's belief propagation algorithm applied to a cyclic belief diagram, and with the Bethe approximation in statistical physics. Therefore, the analysis of the turbo decoding algorithm will reveal the mystery of those similar iterative methods. In this paper, we recapture and extend the geometrical framework initiated by Richardson to the information geometrical framework of dual affine connections, focusing on both of the turbo and LDPC decoding algorithms. The framework helps our intuitive understanding of the algorithms and opens a new prospect of further analysis. We reveal some properties of these codes in the proposed framework, including the stability and error analysis. Based on the error analysis, we finally propose a correction term for improving the approximation.     

Topic allocation method on edge servers for latency-sensitive notification service

The importance of real-time notification has been growing for social services and Intelligent Transporting System (ITS). As an advanced version of Pub/Sub systems, publish-process-subscribe systems, where published messages are spooled and processed on edge servers, have been proposed to achieve data-driven intelligent notifications. In this paper, we present a system that allows a topic to be managed on multiple edge servers so that messages are processed near the publishers, even when publishers spread over a wide area. Duplicating messages on geographically distributed servers could enable immediate notification to neighboring subscribers. However, the duplicated message spool may cause exhaustion of resources. We prepare a formal model of our publish-process-subscribe system and formulate the topic allocation as an optimization problem under the resource constraints of edge servers. As the optimization problem is NP-hard, we propose heuristics leveraging the locality and the pub/sub relationships observed between clients to use the edge server resources efficiently. Our performance evaluation shows that our method reduces the delay to deliver notifications and the effectiveness of the strategy exploiting the relationships between clients.     

Transmission Characteristics of Hybrid Modes in Corrugated Waveguides Above the Bragg Frequency

We studied the transmission characteristics of hybrid modes in a corrugated circular waveguide above the Bragg frequency to develop a broad-band transmission line for millimeter waves. Millimeter waves at 294 GHz were transmitted into a straight waveguide. From observed power profiles in waveguide cross-sections, a high attenuation rate of 0.13 dB/m was obtained. To match a theoretical attenuation constant with the experimental one, we introduced an ad hoc coefficient of conventional surface reactance in the waveguide wall. This was necessary because the wall began to look like the surface with a decreasing anisotropic reactance owing to the frequency above the Bragg frequency. Using nonlinear optimization for mode content analysis, the observed power profiles in the waveguide cross-section were matched with theoretical profiles. There was good agreement between the calculated and observed centers of power profiles and attenuation rate along the waveguide. The theoretical analysis showed that the magnetic field at the waveguide wall increases and the substantial attenuation takes place. Above the Bragg frequency coupling to backwards propagating modes is a point of consideration. A combination of the backwards propagating EH_1,26 and the forward propagating HE₁₁ modes satisfied the Bragg condition at 294.7 GHz which was the nearest frequency of operating frequency. A strong attenuation of the incoming HE₁₁ mode by Bragg resonance was not expected due to large difference of 0.7 GHz. It becomes clear that the observed high transmission loss outside of the Bragg resonance can be explained by a decrease in anisotropic surface reactance at the wall.     

A 16-ns 1-Mb CMOS EPROM

A 16-ns 1-Mb CMOS EPROM has been developed utilizing high-speed circuit technology and a double-metal process. In order to achieve the fast access time, a differential sensing scheme with address transition detection (ATD) is used. A double-word-line structure is used to reduce word-line delay. High noise immunity is obtained by a bit-line bias circuit and data-latch circuit. Sufficient threshold voltage shift (indispensable for fast access time) is guaranteed by a threshold monitoring program (TMP) scheme. The array is organized as 64 K×16 b, which is suitable for 32-b high-performance microprocessors. The active power is 425 mW, the programming time is 100 μs, and the chip size is 4.94×15.64 mm²     

Optical 40-gb/s 3R regenerator with a combination of the SPM and XAM effects for all-optical networks

An all-optical 3R regenerator with a combination of self-phase modulation (SPM) and cross-absorption modulation (XAM) effects is proposed and investigated. Principle performances of the proposed all-optical 3R regenerator were experimentally investigated at a signal bit rate of 40 Gb/s. The all-optical 3R regenerator, which is located at the midpoint of a 1080-km transmission line, successfully provided an approximately 3-dB improvement of the Q-factor both just after regeneration and after totally 1080-km transmission. The chromatic dispersion tolerance of the proposed 3R regenerator was also investigated and successfully enhanced to about twice as wide by introducing a predistortion block configuration including a highly nonlinear fiber (HNLF). It was confirmed that the proposed all-optical 3R regenerator can become one of the strong candidates for the actual deployment of the all-optical network.     

Two Step Timing Synchronization Scheme for OFDM Signal in General Purpose Processor Based Software Defined Radio Receiver

Software defined radio (SDR) is a technology that allows a single terminal to support various kinds of wireless systems by changing its software to reconfigure itself. A general purpose processor (GPP) based SDR receiver platform named Sora has been recently developed by Microsoft. In the GPP based SDR receiver, timing synchronization of an OFDM signal consumes a significant amount of computational resources in the GPP. In this paper, a timing synchronization scheme which uses delayed correlation and matched filtering for the GPP based SDR platform is evaluated. The two stage timing synchronization scheme reduces the computational complexity by limiting the timing range of matched filtering. The proposed scheme reduces the amount of data transmission between the memory and the GPP of the SDR platform. It is shown through an experiment that the proposed scheme reduces the number of cycles for timing synchronization by up to 30 %.     

Pipelined delay-sum architecture based on bucket-brigade devices for on-chip ultrasound beamforming

A pipelined delay-sum architecture based on bucket-brigade devices is proposed as an analog beamformer for integrated far-field steering scanning of a micromachined piezoelectric ultrasonic sensor phased array. The prototype beamformer, fabricated with an 8-/spl mu/m standard CMOS process, exhibits a total harmonic distortion of -45 dB, dynamic range of more than 65 dB, and beamforming imperfection of less than -50 dB using a 100-kHz input signal with peak voltage of 400 mV.     

Capacitance-voltage characteristics of Semiconductor-Insulator-Semiconductor (SIS) structure

The ideal low- and high-frequency capacitance-voltage curves of a semiconductor(2)-insulator-semiconductor(1) (SIS) structure were first calculated with the insulator thickness, conductivity types and doping concentrations in semiconductor(1) and semiconductor(2) as parameters. The effects of fixed oxide charge and interface trap charge on the low and high frequency capacitance-voltage curves were also calculated. It was found that the fixed oxide sheet charge density with its centroid and the order estimation of the interface trap charge density with its effective type in addition to the insulator thickness, conductivity types and doping concentrations in semiconductor(1) and semiconductor(2) could be estimated from measured low and high frequency capacitance-voltage curves of an SIS structure.     

MRI Study of Nucleation and Growth During the Field Induced First Order Phase Transition Between U2D2 and CNAF 3He near Absolute Zero

The field-sweep-induced first order phase transition between two nuclear antiferromagnetic states of solid ³He was studied at the temperatures near absolute zero. The phase transition proceeded in two stages. The first stage was governed by a nucleation process, in which many small seeds of the stable phase appeared in many places throughout a crystal. The measured nucleation rate was essentially temperature independent, once we corrected the data for weak temperature dependence due to limited growth of the seeds after nucleation. With the help of MRI measurements, we understand that the nucleation occurs at peculiar heterogeneous nucleation sites, which are distributed in the entire crystal. Magnetic planar defects in the nuclear ordered spin structure are proposed as a candidate for the nucleation sites. The second stage is understood as a process, which is controlled by the flow of released latent heat across the solid-liquid interface.