Application of a Two-Dimensional Computer Simulation to Cake Growth in Slip Casting with Complicated-Shape Gypsum Molds

A two-dimensional computer simulation method, developed by the authors using the method of finite differences, was applied to estimate the cake growth in slip casting of alumina with a triangular gypsum mold and a box-type gypsum mold with a convex bottom. The cake growth patterns, water penetration patterns, water flow rate distributions, and pressure distributions were simulated in the molds and/or cakes. The simulated cake growth patterns were in good agreement with those observed experimentally in both molds. Moreover, the cake growths could be well understood from the results of the water flow rate distributions in each case. The present method is applicable to cake growth simulation in slip casting with complicated-shape gypsum molds.     

The validity of new memory complaints in the elderly

OBJECTIVE: To determine the validity of new subjective memory complaints (MCs) from individuals who previously, when without dementia, denied having MCs. DESIGN: Prospective cohort. SETTING: Longitudinal, community-based study of aging and dementia. PATIENTS: One hundred thirty-three community-dwelling elderly individuals who were part of a registry for the study of conditions related to aging in North Manhattan, NY. Patients were selected if they were initially without dementia and had completed at least 2 successive annual clinical and neuropsychological evaluations and provided their own medical history. MAIN OUTCOME MEASURES: Performance on memory tests--the Buschke Selective Reminding Test and a visual memory task--and global performance on a neuropsychological test battery and clinical evaluation, by which questionable dementia or dementia was diagnosed according to a well-defined paradigm. RESULTS: Fifty-three subjects with MCs at the initial evaluation performed no worse on the memory test than the 80 subjects who denied MCs initially. There was a weak association between MCs and the diagnosis of questionable dementia at baseline (P = .04), but this was nonsignificant after adjusting for age and education. At 1-year follow-up, 21 of the 80 without baseline MCs now reported MCs. At the follow-up evaluation, these 21 subjects performed significantly worse on the memory tests, were 5 times more likely to have significant cognitive impairment, and had shown significantly greater decline over the preceding year on several of the cognitive measures than the 59 who continued to deny MCs. CONCLUSION: New MCs from individuals, who when without dementia recently denied MCs, may suggest the presence of significant impairment of memory or cognition.     

Beneficial effect of carbon–PVA colloid additives for lead–acid batteries

Based on the previous success of adding ultra-fine carbon–PVA (polyvinyl alcohol) colloid solution to restore performance of weak batteries, a large scale test programme of practical batteries including those used in forklift, golf cart, taxi cab, truck and bus applications from 150 companies was carried out. More than 95% of the tested batteries exhibited excellent recovery in performance parameters including the specific gravity (S.G.), voltage and operation time (Ah capacity). The work reported here includes basic research studies to understand better the beneficial action of the carbon–PVA colloid additive.     

Fabrication of optics by use of plasma chemical vaporization machining with a pipe electrode

We figure optical surfaces by plasma chemical vaporization machining (CVM) with a pipe electrode, in which an rf plasma generated at the electrode tip under approximately atmospheric pressure moves over the surfaces. We propose a shaping method in which the movement of plasma on the surfaces can be determined. Flat and aspheric surfaces are successfully figured with the desired peak-to-valley shape accuracy of 0.1 microm. The root-mean-square roughness of the resultant surfaces is at the subnanometer level. These results confirm that the plasma CVM and the shaping method have the capability to fabricate optics with high accuracy.     

Impact of the Coulomb interaction on nano-scale silicon device characteristics

Monte Carlo simulations coupled self-consistently with the three-dimensional Poisson equation are carried out under the double-gate MOSFET structures. The Coulomb force experienced by an electron inside the device is directly evaluated by performing the Monte Carlo simulations with or without the full Coulomb interaction and the Coulomb force on the channel electron corresponding to plasmon excitations is clarified. It is pointed out that the consistency of the boundary condition is achieved only if the long-range Coulomb interaction is properly taken into account, and this is crucial for predicting reliable device characteristics in ultra-small devices. The drain current and transconductance are greatly reduced if the self-consistent potential fluctuations are taken into account.     

A 4-wavelength optical multi/demultiplexer for WDM subscriber loop systems using analog baseband video transmission

This paper describes the design principles and performance of optical multi/demultiplexers (MUX/DEMUX's) in wavelength-division multiplexing (WDM) subscriber-loop systems over a 50- μm core diameter, graded-index (GI), multimode fiber, which employ analog baseband video transmission using laser diodes (LD's). In this WDM arrangement, requirements for MUX/DEMUX's are: 1) low insertion loss; 2) no signal degradation caused by optical interchannel crosstalk; 3) only a small amount of analog baseband signal degradation caused by the use of MUX/DEMUX; 4) a small size and simple structure capable of multiplexing three or four wavelengths; and 5) good stability. The newly developed 4-wavelength MUX/DEMUX satisfies the preceding requirements and is suitable for application to WDM subscriber-loop systems using analog baseband signals along with digital signals.     

An efficient treatment technique for TMAH wastewater by catalyticoxidation

Developers used in photolithography contain toxic tetramethylammoniumhydroxide (TMAH) and this creates a problem of how to properly treat developer wastewater. We have developed a TMAH wastewater treatment technique that consists of a combination of two novel decomposition processes: pyrolyzing TMAH to TMA and decomposing TMA to N ₂, H₂O, and CO₂ by means of a selective oxidation catalyst for nitrogenous compounds. We have tested a system using this technique in long-term treatment of the actual wastewater and have found it to be sufficiently practical. The running cost of a treatment system using our technique would be about one-ninth that of disposing of the wastewater as industrial waste but about 2.3 times that of biological treatment. Compared with biological treatment, however, our system is tolerant to many treatment conditions and operation management is much easier. Furthermore, it occupies only about one-sixth the area of a biological treatment system     

Processing of ethanol fermentation broths by Candida krusei to separate bioethanol by pervaporation using silicone rubber‐coated silicalite membranes

BACKGROUND: Pervaporation employing ethanol‐permselective silicalite membranes as an alternative to distillation is a promising approach for refining low‐concentration bioethanol solutions. However, to make the separation process practicable, it is extremely important to avoid the problems caused by the adsorption of succinate on the membrane during the separation process. In this work, the pervaporation of an ethanol fermentation broth without succinate was investigated, as well as the influence of several fermentation broth nutrient components. RESULTS: Candida krusei IA‐1 produces an extremely low level of succinate. The decrease in permeate ethanol concentration through a silicone rubber‐coated silicalite membrane during the separation of low‐succinate C. krusei IA‐1 fermentation broth was significantly improved when compared with that obtained using Saccharomyces cerevisiae broth. By treating the fermentation broth with activated carbon, bioethanol was concentrated as efficiently as with binary mixtures of ethanol/water. The total flux was improved upto 56% of that obtained from the separation of binary mixtures, compared with 43% before the addition of activated carbon. Nutrients such as peptone, yeast extract and corn steep liquor had a negative effect on pervaporation, but this response was distinct from that caused by succinate. CONCLUSION: For consistent separation of bioethanol from C. krusei IA‐1 fermentation broth by pervaporation, it is useful to treat the low nutrient broth with activated carbon. To further improve pervaporation performance, it will be necessary to suppress the accumulation of glycerol. Copyright © 2009 Society of Chemical Industry     

Genomics of industrial Aspergilli and comparison with toxigenic relatives

Aspergillus oryzae has been used in Japanese fermentation industries for more than a thousand years. The species produces large amounts of various hydrolytic enzymes and has been successfully applied to modern biotechnology. The size of the A. oryzae genome (37.5 Mb) is very close to that of A. flavus and A. niger, and 20-30% larger than that of either A. nidulans or A. fumigatus. A. oryzae and A. flavus have exactly the same number of aspartic proteinase genes, of which each orthologous pair shares highly conserved amino acid sequences. Synteny analysis with A. fumigatus and A. nidulans showed that the A. oryzae genome has a mosaic structure consisting of syntenic and non-syntenic blocks. In the microorganisms to be compared, the density of the genes having homologs was obviously higher on the syntenic than on the non-syntenic blocks. Expression analysis by the DNA microarray supported the significantly lower expression of genes on the non-syntenic than on the syntenic blocks.