Radiological hazards of TENORM in precipitated calcium carbonate generated as waste at nitrophosphate fertilizer plant in Pakistan

The NORM (naturally occurring radioactive material) in phosphate rock is transferred as TENORM (technologically enhanced naturally occurring radioactive material) to phosphatic fertilizers and to the waste generated by the chemical processes. The waste generated at the NP (nitrophosphate) fertilizer plant at Multan in Pakistan is PCC (precipitated calcium carbonate). Thirty samples of the PCC were collected from the heaps of the waste near the fertilizer plant. Activity concentrations of radionuclides in the waste samples were measured by using the technique of gamma ray spectrometry consisting of coaxial type HPGe (high purity germanium) detector coupled with a PC (personal computer) based MCA (multichannel analyzer) through a spectroscopy amplifier. Activity concentrations of ²²⁶Ra, ²³²Th and ⁴⁰K in the waste samples were determined to be 273 ± 23 (173-398), 32 ± 4 (26-39) and 56 ± 5 (46-66) Bq kg⁻¹ respectively. The activity concentration of ²²⁶Ra in the PCC waste was found to be higher than that in naturally occurring calcium carbonate (limestone and marble) and in worldwide soil. Radiological hazard was estimated from indoor and outdoor exposure to gamma rays from the PCC. Indoor annual effective dose was higher than 1 m Sv. Potential radiological pollution in the environment from TENORM in the PCC has also been addressed.     

Effect of microstructural parameters on the properties of W-Ni-Fe alloys

The aim of this research was to examine the effect of microstructural parameters on the tensile properties of dif- ferent compositions of tungsten heavy alloys. The microstructural parameters (grain size, connectivity, contiguity, and solid volume fraction) were measured and were found to have a significant effect on the tensile properties of tungsten-based heavy alloys. The microstructural parameters of W-Ni-Fe alloys are sufficiently different to present a range of me- chanical properties. It is concluded that the mechanical properties of tungsten heavy alloys largely depend on the micro- structural parameters and their ductility is particularly harmed when grains are contiguous.     

Irreversibility Analysis of MHD Flow over an Exponentially Stretching Sheet

This laminar fluid study investigates the effects of a magnetic field on the entropy generation during fluid flow and heat transfer due to an exponentially stretching sheet. Using the suitable transformations we have obtained the analytical solutions for momentum and energy equation in terms of Kummer's function. The velocity and temperature profiles are obtained for various physical parameters which are utilized to find the entropy generation number N_s and the Bejan number Be. The effects of various parameters on entropy production number and the Bejan number are studied through graphs using velocity and temperature profiles. © 2013 Wiley Periodicals, Inc. Heat Trans Asian Res; Published online in Wiley Online Library ( wileyonlinelibrary.com/journal/htj ). DOI 10.1002/htj.21112     

Impact of frying on key fatty acid ratios of canola oil

The study was carried out to investigate the changes in saturated (SFA), monoene (MUFA), trans (TFA), and polyunsaturated (PUFA) fatty acids and the key fatty acid ratios (SFA/UFA, cis PUFA/SFA, C18:2/C16:0 and C18:3/C16:0) during potato chips frying in canola oil using single bounce attenuated total reflectance FTIR (SB‐ATR‐FTIR) spectroscopy. The data obtained from GC‐FID were used as reference. The calibration of main fat groups and their key fatty acid ratios were developed by partial least square (PLS) regression coefficients using 4000 to 650 cm^?1 spectral range. FTIR PLS regression for the predicted SFA, MUFA, TFA, and PUFA were found 0.999, 0.998, 0.998, and 0.999, respectively, whereas for SFA/UFA, cis PUFA/SFA, C18:2/C16:0 and C18:3/C16:0 the regression coefficients were 0.991, 0.997, 0.996, and 0.994, respectively. We conclude that FTIR‐PLS could be used for rapid and accurate assessment of changes in the main fat groups and their key fatty acid ratios ratio during the frying process. Practical applications: FTIR‐ATR method is very simple, rapid, and environmentally friendly. No sample preparation is required and one drop of oil is enough for FTIR analysis. The proposed method could be applied for quick determination of key fatty acid ratios in the food processing industry.     

Acetanilide-loaded injectable hydrogels with enhanced bioactivity and biocompatibility for potential treatment of periodontitis

Chronic periodontitis poses long-term challenges in dentistry, requiring the development of innovative dental composites with biocompatibility, bone regeneration, and antibacterial properties. This study focuses on synthesis of novel injectable thermoresponsive hydrogels composed of chitosan, sodium bicarbonate, bioactive glass (20 and 40% w/w), and acetanilide drug (0.3 and 0.6% w/w). These hydrogels exhibit a sol–gel transition at 37°C, addressing periodontal challenges with reduced gelation time. The smooth flow characteristic was evaluated through 17-22 gauge syringe needles at low temperature. Rheological studies demonstrated pseudoplastic behavior, with viscosity decreasing as shear rate increases. Fourier transform infrared and x-ray diffraction analysis confirmed the bioactivity of hydrogels, forming a bone-like apatite layer in simulated body fluid. The drug-loaded hydrogels demonstrated promising in vitro antibacterial properties against dental pathogens, specifically Staphylococcus aureus and Pseudomonas aeruginosa. Drug dissolution analysis revealed relatively high release rate at 37°C, highlighting its role in rapidly eliminating bacterial colonies at the target site, while the subsequent sustained release contributes to the prevention of infection recurrence. Finally, biocompatibility was assessed with fibroblast, where the cells were observed anchoring into the polymeric chains of hydrogel through extended filopodia.     

Identification of Proteins Modulated in the Date Palm Stem Infested with Red Palm Weevil (Rhynchophorus ferrugineus Oliv.) Using Two Dimensional Differential Gel Electrophoresis and Mass Spectrometry

A state of the art proteomic methodology using Matrix Assisted Laser Desorption/Ionization-Time of Flight (MALDI TOF) has been employed to characterize peptides modulated in the date palm stem subsequent to infestation with red palm weevil (RPW). Our analyses revealed 32 differentially expressed peptides associated with RPW infestation in date palm stem. To identify RPW infestation associated peptides (I), artificially wounded plants (W) were used as additional control beside uninfested plants, a conventional control (C). A constant unique pattern of differential expression in infested (I), wounded (W) stem samples compared to control (C) was observed. The upregulated proteins showed relative fold intensity in order of I > W and downregulated spots trend as W > I, a quite interesting pattern. This study also reveals that artificially wounding of date palm stem affects almost the same proteins as infestation; however, relative intensity is quite lower than in infested samples both in up and downregulated spots. All 32 differentially expressed spots were subjected to MALDI-TOF analysis for their identification and we were able to match 21 proteins in the already existing databases. Relatively significant modulated expression pattern of a number of peptides in infested plants predicts the possibility of developing a quick and reliable molecular methodology for detecting plants infested with date palm.     

Application of a spectroscopic method to estimate the olive oil oxidative status

A rapid Fourier transformed infrared (FTIR) attenuated total reflectance (ATR) spectroscopic method coupled with partial least squares (PLS), was developed to estimate the oxidation degree of extra virgin olive oil (EVOO). The reference values of EVOO oxidation for the FTIR calibration were obtained by the specific absorptions at 232 and 270 nm, due to the presence of conjugated diene (CD) and conjugated triene (CT) groups, as monitored by the UV spectrophotometric determination. Specific washing procedures were applied to the EVOO to obtain EVOOP and EVOOTP samples, without phenolic compounds and without tocopherols and phenols, respectively. To obtain different oxidation degrees covering wide CD and CT ranges, EVOO, EVOOP, and EVOOTP samples were subjected to a forced oxidation at 60°C for 20 days and aliquots of the oils were daily analyzed. Regression of the FTIR/PLS‐predicted CD and CT of individual oxidized oils EVOO, EVOOP, EVOOTP, and all combined oils (EVOOALL) against UV–Visible reference values demonstrated the good quality of the models in terms of R² and RMSECV values. The results of the study indicated that a strong correlation existed between FTIR and UV–Visible peak intensities. Practical applications: The FTIR‐ATR method coupled with PLS elaboration was developed and applied to predict the oxidation degree of EVOO samples with considerable advantages in terms of simplicity, analysis time, and solvent consumption as compared to the standard method. Moreover, suitable adjustments of the equipment could permit a rapid control at‐line in oil sector.     

Investigation of Dissipation,Adsorption, Degradation,and Leaching of Triazophos Pesticide in Various Soils

This study concerns the investigation of dissipation, adsorption, and degradation of triazophos in different soils from Pakistan. These processes help in the disappearance of pesticide from the environment. Gas chromatography was used for dissipation and adsorption analysis while for degradation study mass spectrometer was used in addition of gas chromatography (GC-MS). The dissipation rate of triazophos in three different soils was 90% over 30 days with average half-life of 9.059 days. From dissipation study it was inferred that rate is variable in each soil due to climatic changes, soil nature and soil-pesticide interactions. Adsorption experiment has revealed that the adsorption of this pesticide to soil follows the pseudo first order kinetic model with rate constant value of 0.479/h and Freundlich isotherm with adsorption capacity of 1.832 mol/g. Degradation study has displayed two major metabolites, one is phosphorothioic acid, S-[2-[(1-cyano-1-methylethyl) amino]-2-oxoethyl] O,O-diethyl ester at retention time of 9.136 and the other is sulfotep at 14.304 min. The leaching potential of triazophos was also calculated from its half-life and organic carbon content present in soil which was 1.688 representing it as non leacher pesticide.     

Synthesis,Characterization, Antibacterial Properties,and In Vitro Studies of Selenium and Strontium Co-Substituted Hydroxyapatite

In this study, as a measure to enhance the antimicrobial activity of biomaterials, the selenium ions have been substituted into hydroxyapatite (HA) at different concentration levels. To balance the potential cytotoxic effects of selenite ions (SeO₃²⁻) in HA, strontium (Sr²⁺) was co-substituted at the same concentration. Selenium and strontium-substituted hydroxyapatites (Se-Sr-HA) at equal molar ratios of x Se/(Se + P) and x Sr/(Sr + Ca) at (x = 0, 0.01, 0.03, 0.05, 0.1, and 0.2) were synthesized via the wet precipitation route and sintered at 900 °C. The effect of the two-ion concentration on morphology, surface charge, composition, antibacterial ability, and cell viability were studied. X-ray diffraction verified the phase purity and confirmed the substitution of selenium and strontium ions. Acellular in vitro bioactivity tests revealed that Se-Sr-HA was highly bioactive compared to pure HA. Se-Sr-HA samples showed excellent antibacterial activity against both Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus carnosus) bacterial strains. In vitro cell–material interaction, using human osteosarcoma cells MG-63 studied by WST-8 assay, showed that Se-HA has a cytotoxic effect; however, the co-substitution of strontium in Se-HA offsets the negative impact of selenium and enhanced the biological properties of HA. Hence, the prepared samples are a suitable choice for antibacterial coatings and bone filler applications.