On the elemental effect of AlCoCrCuFeNi high-entropy alloy system

The AlCoCrCuFeNi high-entropy alloy system was synthesized using a well-developed arc melting and casting method. Their elemental effect on microstructures and hardness was investigated with X-ray diffraction, scanning electron microscopy and Vickers hardness testing. The alloys exhibit quite simple FCC and BCC solid solution phases. Co, Cu and Ni elements enhance the formation of the FCC phase while Al and Cr enhance that of the BCC phase in the alloy system. BCC phases form a spinodal structure during cooling. Copper tends to segregate at the interdendrite region and forms a Cu-rich FCC phase. Low copper content renders the interdendrite as a thin film and the as-cast structure like recrystallized grain structure. The formation of BCC phases significantly increases the hardness level of the alloy system. The strengthening mechanism is discussed.     

Patients requiring sedation

Recent advances in the pharmacology of sedative drugs have expanded their use in the intensive care unit. Indications and endpoints for sedation, however, often are defined poorly and are difficult to assess. Nevertheless, the complications of sedative drug administration are real. New indications for sedation have been proposed in recent years, including enforcing sleep/wake cycles, manipulating cellular metabolism, and preventing myocardial ischemia. The evidence supporting the efficacy of these new indications is not yet complete.     

Dielectric relaxation and electrical conduction at low field of mineral-filled epoxy

Dielectric properties and conduction of the epoxy and its composites were measured over the temperature range — 20 to 70°C and the frequency range 10^–4-10^–1 Hz. Dielectric properties were obtained by performing Fouriertransforms on the charging and discharging curves. The resulting isothermal frequency spectra of dielectric constants and dielectric loss factors were analysed using the Cole-Cole law to obtain the activation energy for each material. The activation energies were also obtained for isothermal d.c. current. Current density-electric field-temperature characteristics are obtained for field levels up to 60 kV cm^–1, with step excitation of the applied field and currents recorded after a delay time of 10 min. Current density and electric field were computed and plotted for constant temperature. The linear (ohmic) curves were obtained for fields up to about 60 kV cm^–1 for temperatures up to about 20 °C. The non-linearity at the higher fields and temperatures did not imply the occurrence of non-ionic conduction. It has been demonstrated that both electric conduction and relaxation behaviour were ionic and could be fit by the Nakajima model for the unfilled epoxy and the Taylor model for the composites.     

Free vibration and stability analysis of shells by the isoparametric spline finite strip method

The isoparametric spline finite strip method has been applied to the free vibration and stability analysis of shells. The convergence of the method is reviewed critically. Additional numerical examples on shells of different geometry are also employed to demonstrate the efficiency, accuracy and versatility of the method.     

MODELING LIQUID MASS TRANSFER IN HIGEE SEPARATION PROCESS

Correspondence concerning this paper should be addressed to Professor Richard S.H. Mah. Hsien-Hsin Tung is now affiliated with Department of Chemical Engineering, California Institute of Technology

Penetration theory is used to describe the liquid mass transfer in Higee separation process. Within a possible range of effective areas, it is shown that the predicted mass transfer coefficients are in reasonable agreement with the estimated mass transfer coefficients. The estimated coefficients were calculated from the experimental data and the possible effective areas. Hence it is concluded the penetration theory is generally applicable to describe liquid mass transfer in Higee separation process. The comparison also suggests that liquid mixing at the junctions of packing materials may be more complete in Higee process than in traditional process.     

High affinity hormone binding to the extracellular N-terminal exodomain of the follicle-stimulating hormone receptor is critically modulated by exoloop 3

The human follicle-stimulating hormone receptor (FSH-R) consists of two distinct domains of >330 amino acids, the N-terminal extracellular exodomain and membrane-associated endodomain. The exodomain alone binds hormone with high affinity, whereas the endodomain is the site of receptor activation. Coordination of these two domains is essential for successful hormone action but little is known about their functional and structural relationship. In this communication, we report that exoloop 3 of FSH-R constrains follicle-stimulating hormone binding to the exodomain. When the FSH-R exodomain was prepared by truncating its endodomain, the hormone binding affinity of the exodomain was slightly improved, compared with the wild type receptor. The binding affinity was further improved by >3-fold when the exodomain was attached to the membrane-associated domain of CD8. These results suggest that the FSH-R endodomain attenuates hormone binding at the exodomain. As a first step to test this hypothesis, the 11 amino acids except Ala589 of exoloop 3 were individually substituted with Ala. Ala substitution for Leu583 or Ile584 improved the hormone binding affinity by 4-6-fold while totally abolishing cAMP induction, indicating an inverse relationship. The Ala substitution for Lys580 or Pro582 had a similar trend but to a lesser extent. This significant improvement in the binding affinity suggests that the four residues at the N-terminal region of exoloop 3 interact with the exodomain and constrain the hormone binding in the wild type receptor. This effect is specific since substitutions for other than the 4 residues did not improve the hormone binding affinity. Computer modeling shows that the 4 residues can be positioned on one side of exoloop 3. This result and the apparent inverse relationship of hormone binding and cAMP induction suggest that these two essential functions may work against each other. Therefore, hormone binding might be compromised to preserve cAMP inducibility while maintaining a reasonably high, but below maximum, binding affinity.     

Quantitative studies on the movement of fluid and lymphocytes through periodontal tissue and into the draining lymph.

Chronic lymph drainage techniques in sheep have been used to map the pathways and to quantify the fluid and cell traffic through periodontal tissues. The continuous collection of cervical and prescapular lymph has demonstrated that 65% of labelled protein tracer injected into the periodontal tissues could be found in lymph over a period of 7.5 hours. Nearly 90% of the total radioactivity could be accounted for between the lymph and the tissue site. When silk was impregnated with radiolabelled albumin and a tooth ligated, the kinetics of the subsequent appearance of the tracer in lymph emphasized the ease with which macromolecules surrounding the teeth gain access to the lymphatics, regional lymph nodes, and immune apparatus. Animals were primed with BCG and then tuberculin (delayed hypersensitivity) lesions were simultaneously induced in the skin, bowel, and periodontium. When T cells were labelled with radioisotopes and their migration from blood to lymph measured, the periodontal tissue traffic pattern was distinct from the traffic pattern through DTH in the skin and also distinct from the pattern through the small intestine. This indicates that the lymphocyte traffic through the inflamed periodontium has unique features. This tissue specificity was not apparent when lesions were induced with TNFalpha. The static assessment of lymphocyte subsets within the tissues was also assessed with immunohistochemistry.     

Effect of lamellar spacing on microstructural instability and creep behavior of a lamellar TiAl alloy

Finer lamellar spacing in the lamellar structure of a Ti–45Al–2Nb–2Mn + 0.8 vol.%TiB₂ (45XD) alloy does improve the primary creep resistance. However, the unstable nature of the fine plate contributes largely to the degradation of the lamellar structure and a rapid increase in the tertiary creep rate, indicating that a fine lamellar structure has a detrimental effect on the long-term creep.     

Pulse study of methane partial oxidation to syngas over SiO2-supported nickel catalysts

Methane was pulsed over pure CuO and NiO as well as Cu/La₂O₃ and Ni/La₂O₃ catalysts at 600° C. Results indicate that the mechanisms for methane activation over copper and nickel are quite different. Over CuO, methane is converted to CO₂ and H₂O, most likely via the combustion mechanism; whereas metallic copper does not activate methane. Over NiO in the presence of metallic nickel sites, methane activation follows the pyrolysis mechanism to give CO, CO₂, H₂ and H₂O. Similar results were obtained over the Cu/La₂O₃ and Ni/La₂O₃ catalysts. XRD investigations indicate that copper and nickel existed as CuLa₂O₄ and LaNiO₃ respectively in the La₂O₃-supported catalysts. The effect of La₂O₃ on the activation of methane is discussed.