GaN HEMT器件封装技术研究进展

GaN高电子迁移率晶体管(HEMT)器件由于其宽禁带材料的独特性能,相比硅功率器件具有击穿场强高、导通电阻低、转换速度快等优势,在智能家电、交直流转换器、光伏逆变器以及电动汽车等领域有着广泛的应用前景.但GaN HEMT器件的高功率密度和高频工作特性,给器件封装带来了极大挑战,要使其出色性能得以充分发挥,其封装结构、材...     

An empirical study on user access to entertainment streaming media

I. Introduction Streaming media has been widely used over the Internet in recent years. However, the growing use in streaming media, which generally has large size, can have a significant impact on the user perceived latency and network congestion. A popular approach to reduce the response time and backbone bandwidth consumption is to deploy proxy caches at the edge of the Internet. Due to the large size and different popularity for different part of the streaming video, it is not practical …     

Fast removal of Pb(II) and Cu(II) from contaminated water by groundwater treatment waste: impact of sorbent composition

ABSTRACT

A non-hazardous groundwater treatment waste (GWTW) was examined as a low-cost sorbent for Pb(II) and Cu(II) ions. The content of the dominant elements in GWTW was as follows: 78% Fe₂O₃, 7.4% P₂O₅, 7.4% CaO and 5.2% SiO₂. The removal of Pb(II) and Cu(II) was fast, and more than 67–95% of ions were accumulated by GWTW during the first 3 min. The sorption capacity of GWTW depends on solution pH, concentration and temperature. Equilibrium data fitted well with Langmuir–Freundlich and Langmuir-partition models. The inherently formed nano-adsorbent could be utilized for the treatment of water contaminated with Pb(II) and Cu(II) ions.     

Direct Reprogramming and Induction of Human Dermal Fibroblasts to Differentiate into iPS-Derived Nucleus Pulposus-like Cells in 3D Culture

Intervertebral disc (IVD) diseases are common spinal disorders that cause neck or back pain in the presence or absence of an underlying neurological disorder. IVD diseases develop on the basis of degeneration, and there are no established treatments for degeneration. IVD diseases may therefore represent a candidate for the application of regenerative medicine, potentially employing normal human dermal fibroblasts (NHDFs) induced to differentiate into nucleus pulposus (NP) cells. Here, we used a three-dimensional culture system to demonstrate that ectopic expression of MYC, KLF4, NOTO, SOX5, SOX6, and SOX9 in NHDFs generated NP-like cells, detected using Safranin-O staining. Quantitative PCR, microarray analysis, and fluorescence-activated cell sorting revealed that the induced NP cells exhibited a fully differentiated phenotype. These findings may significantly contribute to the development of effective strategies for treating IVD diseases.     

双向无粘结预应力井字梁施工

双向无粘结预应力混凝土井字梁结构施工中，采取在端头承压垫板上钻小孔定位无粘结筋、与群锚配套使用，省去铸铁喇叭管，简化了施工方法。     

Solid superbase derived from lanthanum–magnesium composite oxide and its catalytic performance in the knoevenagel condensation under solvent-free condition

We report for the first time the synthesis of a novel solid superbase that was derived from lanthanum–magnesium composite oxide and KOH through thermal treatment. The as-prepared material shows base strength (H_–) above 26.5 and is a high-efficiency catalyst for solvent-free Knoevenagel condensation at room temperature. The results of the present study open up a new dimension for the use of composite oxides as new support materials in the synthesis of superbases.     

Dielectric-breakdown-induced epitaxy: a universal breakdown defect in ultrathin gate dielectrics

The breakdown phenomena in SiO/sub x/N/sub y/ (EOT=20 /spl Aring/) gate dielectric under a two- stage constant voltage stress in inversion mode are physically analyzed with the aid of transmission electron microscopy. The results show that dielectric-breakdown-induced epitaxy (DBIE) remains as one of the major failure defects responsible for gate dielectric breakdown evolution even for a stress voltage as low as 2.5 V. Based on the results, the same failure mechanism i.e., presence of DBIE would be responsible for the degradation in ultrathin gate dielectrics for gate voltage below 2.5 V. It is believed that DBIE will be present in MOSFETs failed at nominal operating voltage.     

Three-Parameter Model for Debonding of FRP Plate from Concrete Substrate

Concrete beams retrofitted with bonded fiber reinforced plastic (FRP) plates often fail by debonding of the plate from the concrete surface. To predict the failure load in design, a proper debonding model is required. As debonding is a nonlinear process involving material softening, it can be analyzed once the interfacial shear (τ) versus sliding (s) relationship is known. Recent experimental results indicate that the simplest τ-s relationship should involve three parameters: the maximum shear stress for debonding to initiate, the initial residual stress right after debonding occurs, and a parameter governing the reduction of shear stress with sliding. In this paper, a FRP debonding model based on these three parameters is developed. The applicability of the model is verified through comparison with experimental results. Through a systematic parametric study, the effect of various material and geometric properties on the debonding process is investigated. Implications to the design of FRP strengthened members are highlighted.