Synthesis of enantiomerically pure 1-O-phosphocholine-2-O-acyl-octadecane and 1-O-phosphocholine-2-N-acyl-octadecane

This is the first report on the chemical synthesis of enantiomerically pure R- or S-1-O-phosphocholine-2-O-acyl-octadecanes and R- or S-1-O-phosphocholine-2-N-acyl-octadecanes. From a structural point of view these phospholipids are intermediates between phosphatidylcholine and sphingomyelin. The synthesis of these model compounds is based on R- or S-1.2-O-isopropylidene-glyceraldeyde for chain elongation in a Wittig reaction with pentadecane-triphenylphosphine bromide. The resulting 1.2-O-isopropylidene-octadec-3-en is converted to R- or S-1.2-octadecanediol by catalytic hydrogenation of the double bond and by acidic removal of the isopropylidene protecting group. Tritylation of R- or S-1.2-octadecanediol results in the general intermediates R- or S-1-O-trityl-2-hydroxy-octadecane. These are the key intermediates for the synthesis of the phosphatidylcholine- or sphingomyelin-like end products. R- or S-1-O-phosphocholine-2-O-acyl-octadecane is obtained from the tritylated intermediates via benzylation in position 2, acidic detritylation and conversion of the R- or S-1-hydroxy-2-benzyl-octadecanes to the respective phosphocholines via the phosphoethanolamines. Catalytic hydrogenolysis of the benzyl group results in R- or S-1-O-phosphocholine-2-hydroxy-octadecane, which is converted to the phosphatidylcholine-like end products by acylation. R- or S-1-O-phosphocholine-2-N-acyl-octadecane is obtained from the tritylated intermediate by conversion of the R- or S-2-hydroxy group into the N-phthalimido group, which is achieved by inversion of the configuration using the Mitsunobu reaction with phthalimid. After acidic detritylation, the product is converted to the respective S- or R-1-O-phosphocholine derivative in a similar sequence of reactions. The phthalimido group is converted to the 2-amino group, and acylation results in the sphingomyelin-like end products.     

A benchmark on the calculation of kinetic parameters based on reactivity effect experiments in the CROCUS reactor

Measurements in the CROCUS reactor at EPFL, Lausanne, are reported for the critical water level and the inverse reactor period for several different sets of delayed supercritical conditions. The experimental configurations were also calculated by four different calculation methods. For each of the supercritical configurations, the absolute reactivity value has been determined in two different ways, viz.: (i) through direct comparison of the multiplication factor obtained employing a given calculation method with the corresponding value for the critical case (calculated reactivity: ρ_calc); (ii) by application of the inhour equation using the kinetic parameters obtained for the critical configuration and the measured inverse reactor period (measured reactivity: ρ_meas). The calculated multiplication factors for the reference critical configuration, as well as ρ_calc for the supercritical cases, are found to be in good agreement. However, the values of ρ_meas produced by two of the applied calculation methods differ appreciably from the corresponding ρ_calc values, clearly indicating deficiencies in the kinetic parameters obtained from these methods.     

Automated estimation of rock fragment distributions using computer vision and its application in mining

Size distribution of rock fragments obtained from blasting and crushing in the mining industry has to be monitored for optimal control of a variety of processes before reaching the final grinding, milling and the froth flotation processes. Whenever feasible, mechanical sieving is the routine procedure to determine the cumulative rock weight distribution on conveyor belts or free falling off the end of transfer chutes. This process is tedious and very time consuming, even more so if a complete set of sieving meshes is used. A computer vision technique is proposed based on a series of segmentation, filtering and morphological operations specially designed to determine rock fragment sizes from digital images. The final step uses an area-based approach to estimate rock volumes. This segmentation technique was implemented and results of cumulative rock volume distributions obtained from this approach were compared to the mechanical fragment distributions. The technique yielded rock distribution curves which represents an alternative to the mechanical sieving distributions.     

Simulation and experimental analyses of electromagnetic transients behaviors of lightning surge on vertical conductors

Simulation of very fast surge phenomena in a three-dimensional (3-D) structure requires a method based on Maxwell's equations, such as the finite-difference time-domain (FDTD) method or the method of moments, because circuit-equation-based methods cannot handle the phenomena. This paper uses a method of thin-wire representation of the vertical conductor system for the FDTD method which is suitable for the 3-D surge simulation. The thin-wire representation is indispensable to simulate electromagnetic surges on wires or steel frames in which the radius is smaller than a discretized space step used in the FDTD simulation. In this paper, a general surge analysis program named the virtual surge test lab based on the Maxwell's equations formulated by the FDTD method, is used to simulate the surge phenomena of a vertical conductor, including the effects of horizontal wave incidence and vertical wave incidence. Experimental results on the reduced scale model have been presented in order to compare among the simulation results by the FDTD method and the results using numerical electromagnetic code based on the MoM.     

Mechanical and microstructure studies on the modification of CA film by blending with PS

DriedMusa paradiciaca (banana) stem and veins of the leaves, which were hitherto discarded as a waste, were collected and used as starting material for the preparation of cellulose and cellulose acetate. This cellulose acetate was mixed with polystyrene to form blend of cellulose acetate-polystyrene in order to provide enhanced stability and extended utility to the end products. The films of these composites or their individual partners were made separately and studied for their mechanical properties, chemical modification and morphological changes. We report here that banana stem is good source of cellulose and that cellulose completely undergoes modification upon esterification.     

Mössbauer spectroscopic studies of Fe-substituted YIG

Compositional dependence of hyperfine parameters, determined through Mössbauer spectral analysis has been studied for Y_3−xFe_5+xO₁₂ (x = 0.0, 0.1, 0.3 and 0.5) garnet system at 300 K. The Mössbauer spectra have been fitted with three sextets in the ferrimagnetic state corresponding to Fe³⁺ ions at tetrahedral (d), octahedral (a) and dodecahedral (c) sites of the crystal structure. It is observed that isormershift, quadrupole shift and hyperfine field of d-site show no significant variation with Fe³⁺ concentration. The change in hyperfine fields of a- and c-sites with composition (x) has been explained on the basis of strength of exchange integrals, change in isomershift can be understood due to s-electron charge distribution and asymmetric displacement of oxygen ions surrounding the a- and c-sites seems to be responsible for observable quadrupole shift. The magneton number values obtained from magnetization and Mossbauer data are in agreement to those calculated using Neel's three sublattice model of ferrimagnetism.     

Investigation of the geothermal anomaly of Travale (Tuscany) by telluric, magnetotelluric and geomagnetic deep sounding measurements

As part of the European Community research programme telluric, magnetotelluric and geomagnetic deep sounding measurements were undertaken at 40 sites within the geothermal area of Travale. In the period range of 6–10,000 s the telluric field inside the Travale graben is strongly polarized and directed, independent of the period, about parallel to the graben strike. The lateral variation of the telluric field amplitude is determined mainly by the distribution of the rocks (e.g. the central part of the geothermal anomaly inside the graben is correlated with a horst structure of resistive rocks) and an influence of the geothermal anomaly on the telluric field distribution cannot be observed. The apparent resistivity, as well as the phase curves, are rather similar at all sites within the graben, exhibiting 4–40 ohm · m for periods of 10 s and 50–500 ohm · m for periods of 10,000 s in E-polarization. In the period range of 10–100 s the E- and B-polarization of magnetotelluric measurements can be interpreted by the 2-D effect of the Travale graben, while with increasing period the induced current system becomes more and more 3-D below all sites. This limits the determination of the sedimentary cover thickness (max. 2500 m) by 1-D and 2-D model calculations to periods of less than 100 s.     

The microscopy cell (MicCell), a versatile modular flowthrough system for cell biology, biomaterial research, and nanotechnology

We describe a novel microfluidic perfusion system for high-resolution microscopes. Its modular design allows pre-coating of the coverslip surface with reagents, biomolecules, or cells. A poly(dimethylsiloxane) (PDMS) layer is cast in a special molding station, using masters made by photolithography and dry etching of silicon or by photoresist patterning on glass or silicon. This channel system can be reused while the coverslip is exchanged between experiments. As normal fluidic connectors are used, the link to external, computer-programmable syringe pumps is standardized and various fluidic channel networks can be used in the same setup. The system can house hydrogel microvalves and microelectrodes close to the imaging area to control the influx of reaction partners. We present a range of applications, including single-molecule analysis by fluorescence correlation spectroscopy (FCS), manipulation of single molecules for nanostructuring by hydrodynamic flow fields or the action of motor proteins, generation of concentration gradients, trapping and stretching of live cells using optical fibers precisely mounted in the PDMS layer, and the integration of microelectrodes for actuation and sensing.     

Mg-doped LiNi0.5Mn1.5O4 spinel for cathode materials

Lithium-ion batteries are becoming more and more important not only for portable electronic devices, but also in prevision of high power electric vehicles. In such an optic, deep studies regarding all the components of a secondary battery are in development. In this study, high voltage cathode materials have been selected. Crystals with spinel structure have a 3D vacancy pathway suitable for Li-ions transport. The material under study was LiNi_0.5Mn_1.5O₄ doped with magnesium replacing the nickel. Various samples were synthesized via three different routes: a solid-state method, a modified sol–gel method and a xerogel method. The structure and morphology of the powders were analyzed with HRTEM and XRD. Electrochemical tests were also performed. A wide range of particle sizes (from micro to nanosize) was the result of the different synthesis routes. Unfortunately pure materials were not always obtained. The electrochemical tests showed improvement of the material's cyclability, by reducing the particle size. The electrochemical tests further confirmed the existence of a Li_1+dMn_2−dO₄ impurity. The results are quite promising, however, further improvement of the purity of the electrode composition are needed.     

A frame-based knowledge representation model and its mapping to nested relations

The first part of this paper introduces the basic constructs of a frame representation model and gives a formal definition for them. Subsequently the nested relational model (NF²) is described as an extension of the classical relational model to support relation-valued attributes. In the second part of this paper both models are compared with each other and a mapping of frame representation structures to NF² structures is specified. The structural similarities between frames and NF² relations are made clear and it is shown that their main difference is due to the type polymorphism introduced by the concept hierarchy of the frame model. This causes type collisions to occur in the strictly typed NF² model when frames are directly mapped to NF² structures. Two solutions to this problem are suggested and compared. The paper concludes with a reformulation of query operations of the frame model in terms of NF² algebra operations.