Approaches to large-scale urban modeling

Large-scale urban modeling technologies use a variety of sensors and data acquisition techniques. The authors categorize current approaches and describe their advantages and disadvantages. Their survey examines current research with respect to several performance criteria including data acquisition sources, user interaction level, geometric fidelity, model completeness, and intended applications. Although modeling systems vary with respect to these criteria, data acquisition strongly influences model characteristics and usefulness. We therefore cluster the methods into those based on photogrammetry, active sensors, and hybrid sensor systems.     

Classification of heart rate data using artificial neural network and fuzzy equivalence relation

The electrocardiogram is a representative signal containing information about the condition of the heart. The shape and size of the P-QRS-T wave, the time intervals between its various peaks, etc. may contain useful information about the nature of disease afflicting the heart. However, these subtle details cannot be directly monitored by the human observer. Besides, since bio-signals are highly subjective, the symptoms may appear at random in the time scale. Therefore, the signal parameters, extracted and analysed using computers, are highly useful in diagnostics. This paper deals with the classification of certain diseases using artificial neural network (ANN) and fuzzy equivalence relations. The heart rate variability is used as the base signal from which certain parameters are extracted and presented to the ANN for classification. The same data is also used for fuzzy equivalence classifier. The feedforward architecture ANN classifier is seen to be correct in about 85% of the test cases, and the fuzzy classifier yields correct classification in over 90% of the cases.     

Electrical, microstructural, physical and chemical characterization of HV XLPE cable peelings for an electrical aging diagnostic data base

The aim of the European project "ARTEMIS" is to develop a diagnostic system for assessing aging in power cable insulation. Its first task was to make a thorough characterisation of the cable insulation before aging. This is intended to provide a background against which any changes introduced by thermo-electric aging can be identified. The aging markers derived from this initial characterisation will be considered both as diagnostic indicators in their own right, and also to develop an aging model for predictive purposes, if and when possible. This stage of the ARTEMIS programme is now complete and we will present an analysis of the results, and show how they may be correlated with the concepts proposed in aging theories.     

Simulation of energized Franklin rods for lightning protection

In this paper, the onset criterion of the upward streamers from an energized Franklin rod is formulated as a function of the geometry of the rod and the height and current of the downward leader. The electric field in the vicinity of the lightning rod is calculated using the charge simulation technique. The dependency of the radius of protection on the amplitude of the pulse voltage applied to the Franklin rod, the downward leader current, and the tip radius and height of the rod is investigated     

Influences of the dynamic strain aging on the J–R fracture characteristics of the ferritic steels for reactor coolant piping system

The leak-before-break (LBB) design of the piping system for nuclear power plants has been based on the premise that the leakage due to the through-wall crack can be detected by using leak detection systems before a catastrophic break. The piping materials are required to have excellent J–R fracture characteristics. However, where ferritic steels for reactor coolant piping systems operate at the temperatures where dynamic strain aging (DSA) could occur, the fracture resistance could be reduced with the influence of DSA under dynamic loading. Therefore, in order to apply the LBB design concept to the piping system under seismic loading, both static and dynamic J–R characteristics must be evaluated.Materials used in this study are SA516 Gr.70 for the elbow pipe and SA508 Cl.1a for the main pipe and their welding joints. The crack extension during the dynamic and the static J–R tests was measured by the direct current potential drop (DCPD) and the compliance method, respectively. This paper describes the influences of the dynamic strain aging on the J–R fracture characteristics with the loading rate of the pipe materials and their welding joints.     

Impact vibration of a bar

This paper treats the motion and dynamic stability of a bar having constant stiffness and mass distribution when subjected to a periodic driving force, a distributed and linear damping force and impact forces due to its motion and operation (such as would occur on, e.g. the hammer in a rock drilling machine). Comparisons have been made between the characteristics of a bar operated by either pneumatic or hydraulic means.     

Optimization of abrasive water jet cutting of ductile materials

Full factorial design of experiments was developed in order to investigate the effects of jet pressure, abrasive mixing rate, cutting feed, and plate thickness upon three response variables, surface finish of cutting wear zone, percentage proportion of striation free area, and maximum width of cut. The set of sixteen experiments was performed on each of the following two ductile materials: AISI 4340 (high strength low alloy steel, hardened to 49HRc) and Aluminum 2219. Analysis of Variance (ANOVA) was performed on experimental data in order to determine the significance of effects of different parameters on the performance measures. It was found that cutting feed and thickness were highly influential parameters, while abrasive mixing rate is influential upon surface roughness only. Strong interaction was found between jet pressure and workpiece material. Multi-criteria numerical optimization was performed in order to simultaneously maximize/minimize different combinations of performance measures.     

The influence of the material toughness and the state of stress on fracture of large scale specimens

The influence of the material toughness on fracture behaviour of large scale tensile specimens is being described in this report. Selected large scale specimens show that the amount of stable crack growth prior to instability is affected by the constraint in the specimen. The constraint depends on the specimen geometry, the specimen size, and in the case of elastic plastic material behaviour on the ductility of the material. A possibility of estimating these influences is presented by quantifying the constraint with the multi-axiality quotient q.     

VLDL receptor mediates the uptake of human chylomicron remnants in vitro

The VLDL receptor has been described as a new member of the LDL receptor supergene family that specifically binds VLDL in vitro via apolipoprotein E and lipoprotein lipase. Both apolipoprotein E and lipoprotein lipase are constituents of chylomicron remnants, another triglyceride-rich lipoprotein which has been proposed as a physiological ligand for the VLDL receptor. We used human chylomicron remnants to study their uptake into LDL, receptor-deficient Chinese hamster ovary cells overexpressing the human VLDL receptor. The uptake into these cells was compared to that into cells transfected with an empty transfection vector. Human chylomicron remnants were produced in vitro by hydrolysis with lipoprotein lipase, and were labeled with 125I. The uptake of these remnants into the cells overexpressing the VLDL receptor was found to be about 3-fold higher than the uptake into the control cells. The addition of a surplus of either apolipoprotein E or inactivated lipoprotein lipase to the remnants led to an increase in particle uptake. The chylomicron remnant uptake was inhibited by addition of the 39 kDa receptor associated protein These in vitro experiments strongly support the idea that the VLDL receptor is a physiological receptor for chylomicron remnants. The increase of receptor-mediated uptake induced by the addition of apoE or lipoprotein lipase underlines the role of these two proteins in this process.