DYNAMIC MECHANICAL BEHAVIOURS OF HIGH Mo AUSTENITIC STAINLESS STEEL DURING HOT DEFORMATION

The dynamic mechanical behaviours of super low carbon high Mo austenitic stainless steel(00Cr20Nil8Mo6CuN)during hot deformation have been studied by using Formaster-Presshot working simulator. The hot deformation equation, as well as the relationship between peakstrain, peak stress and Zener-Hollman parameter, together with the deformation activationenergy have been resulted through the experiments.     

复合材料层压板的超声相控阵检测

为满足复合材料层压板在厚度方向不存在加工余量及其缺陷特征的需求,设计了具有不同大小和埋深的人工缺陷的复合材料层压板试块,利用超声相控阵检测法对该试块进行100%扫查。C扫图像显示所有人工缺陷均能被检测出来,且位于第一与第二层碳布之间3mm的最小缺陷清晰可辨。经实际应用表明,超声相控阵检测法可用于复合材料层压板的无损检测。     

含Li的高锌Al-Zn-Mg-Cu合金的时效行为

对化学成分(质量分数，％)为Al-11.8Zn-2．9Mg-2．8Cu-1．17Li的合金分别在110℃、120℃、130℃、140℃、150℃、160℃和180℃进行人工时效，并对部分试样进行透射电镜观察。结果表明，适量Li对高合金含量的Al-Zn-Mg-Cu合金的沉淀相形核影响不大，但可抑制其长大。高的合金含量，可以使合金在时效过程中析出高密度细小的沉淀相，从而达到很高的硬度，但不能完全固溶于基体的合金元素在晶界形成粗大的第二相。     

Hard x-ray transmission crystal spectrometer at the OMEGA-EP laser facility

The transmission crystal spectrometer (TCS) is approved for taking data at the OMEGA-EP laser facility since 2009 and will be available for the OMEGA target chamber in 2010. TCS utilizes a Cauchois type cylindrically bent transmission crystal geometry with a source to crystal distance of 600 mm. Spectral images are recorded by image plates in four positions, one IP on the Rowland circle and three others at 200, 400, and 600 mm beyond the Rowland circle. An earlier version of TCS was used at LULI on experiments that determined the x-ray source size from spectral line broadening on one IP positioned behind the Rowland circle. TCS has recorded numerous backlighter spectra at EP for point projection radiography and for source size measurements. Hard x-ray source size can be determined from the source broadening of both K shell emission lines and from K absorption edges in the bremsstrahlung continuum, the latter being a new way to measure the spatial extent of the hard x-ray bremsstrahlung continuum.     

粉末粒度对碳/碳基体上羟基磷灰石涂层的影响

采用等离子喷涂技术在碳纤维增强碳复合材料(简称碳／碳复合材料)上制备了羟基磷灰石涂层,研究了原始粉末粒度对涂层的表面形貌、剪切强度、相组成等方面的影响,并分析了涂层与基体的界面结合状况。结果表明：采用粗粉末喷涂后得到的涂层结合强度较高．结晶程度也较高,但涂层与基体的结合机制仍为机械嵌合。     

同步辐射高分辨率衍射光束线的设计

介绍了第三代同步辐射高分辨率X射线衍射光束线的总体设计。给出了高分辨率衍射的基本原理并描述了获得确定光子能量的近平行高强度X射线光束线所必需的光学元件。特别是用X射线动力学理论,解释了双晶及四次反射晶体单色器。作为一个实例,介绍了将于2009年开始在德国汉堡运行的一个新的同步辐射源PETRAⅢ的高分辨率衍射(HighRes)光束线的设置情况。通过优化光学部件,对微米尺寸光束,q空间的分辨减小到Δq=10^-5 nm^-1,光通量大于10¹¹ cts/s。     

超长混凝土结构的研究与应用

本文结合南京国际展览中心工程 ,对超长混凝土结构的设计、温度应力的有限元分析以及施工措施等进行了深入的探讨 ,并介绍了长期测试结果。     

Mechanisms of ion-induced GaN thin layer splitting

The underlying physics and the role of H-defect interaction in H ion-induced splitting of GaN were investigated by transmission electron microscopy, high resolution X-ray diffraction, positron annihilation spectroscopy, ion channeling, elastic recoil detection, and infrared spectroscopy. A high concentration of void-like nanoscopic structures, nanobubbles, is detected immediately after implantation. Positron annihilation measurements demonstrate that the detected structures are vacancy clusters. FTIR data show that H-defect vibrational spectrum peaks at 3141 cm^?1 mode attributed to V_Ga–H₄. A large fraction of H was found to be trapped in higher frequency modes which we associate tentatively to N–H stretch modes in the internal surfaces of nanobubbles. These nanobubbles persist during annealing up to 450 °C. An increase of the strain is observed in this temperature range. This strain relaxes partially above 450 °C following the formation of the platelets which are embryos of the microcracks.     

Neutronics design analyses of fusion power reactors based on a novel integral approach

A novel integral approach was applied for the nuclear design analyses performed for the European DEMO Conceptual Study including, for the first time, the automatic generation of analysis models for Monte Carlo calculations from available CAD geometry data by the new McCad conversion tool. Starting from neutronics pre-analyses to define the radial reactor build, a generic neutronics CAD model of the DEMO reactor was constructed serving as basis for the generation of DEMO reactor models employing the HCLL (Helium Cooled Lithium Lead) and HCPB (Helium Cooled Pebble Bed) blankets for the tritium breeding and the power production. The HCLL and HCPB DEMO reactor models were converted to the MCNP geometry representation by the newly developed McCad software tool. The nuclear analyses performed on the basis of MCNP Monte Carlo calculations using the converted models showed that both DEMO reactor variants could satisfy the requirements for a sufficient shielding and tritium breeding performance. As a major outcome of this work it is concluded that the newly established integral approach for neutronics analyses, including the automatic generation of analysis geometry models by McCad, is mature for applications to reactor design analyses and studies.     

Optimised plasma stabilisation at TEXTOR with an advanced, real-time digital control scheme

The tokamak TEXTOR at the Research Centre in Jülich is in operation since more than 25 years. The various control systems at the start, in 1982, were based on analogue techniques, a standard at the time, and were later partly replaced by specially developed digital systems. These systems proved their robustness over the years. As a replacement for the old system, off-the-shelf products were used to ensure continuity, reliability and to reduce the development cost. To provide advanced control scenarios, the new system allows the implementation of more sophisticated algorithms for magnetic and kinetic control. The LabVIEW Real-Time (RT) modules and real-time hardware from National Instruments satisfy these requirements to a large extent. The new system has already been successfully commissioned at TEXTOR and is used to calculate in real-time the plasma density profile (10 ms), the Shafranov shift (10 ms), the plasma vertical and horizontal position (20 $\mu$s) and to control the plasma shape (1 ms). TEXTOR has circular plasmas and has an iron core. Its central part is operated in saturation. During the saturation phase, stray fields change the plasma shape from nearly circular to slightly triangular. By using a shape-control coil set, we can control and adjust the plasma form. The new real-time system is presented as well as the implemented control applications.