Large area synthesis of conical carbon nanotube arrays on graphite and tungsten foil substrates

Conical carbon nanotube (CCNT) arrays were synthesized over a large area of approximately 1 cm² or more on graphite and tungsten foil substrates. Experimental observations reveal that nucleation is caused by catalyst metal cluster in the initial stages, but the tapered morphology occurs due to the difference in the rates of vertical growth by attachment carbon atoms at edges of growing graphene sheets and radial growth with epitaxial nucleation of new graphene layers near bottom at the substrate. The above mechanism is supported through re-growth experiments on straight multi-walled nanotubes and growth kinetics data, which suggest a linear relationship between the growth rate and ratio of diameter to length (d/l) of CCNT.     

Buchbesprechungen

Ohne Zusammenfassung     

X-ray tomographic microscopy of fibre-reinforced materials

Aluminium composites containing Al₂O₃ fibres and precipitates of various intermetallic phases are investigated by high-resolution computerized microtomography. Individual fibres 15 μm in diameter and intermetallic phases forming a network with about 15 μm mesh size have been imaged. The capabilities of the method and its further development down 1 μm and less spatial resolution are discussed.     

Specific heat and critical field for some iron-containing superconductors

Specific heat measurements on superconductingLu ₂ Fe ₃ Si ₅ reveal a strong sample dependence of the residual specific heat contribution _s , belowT _c , effectively ruling out the possibility of a two-band model. Upper critical fieldH _c2 results for Lu₂Fe₃Si₅, Sc₂Fe₃Si₅, and LaFe₄P₁₂ show a very largeH _c2 with an unusual temperature dependence for Lu₂Fe₃Si₅, in contrast to the latter two compounds, implying a strongly sample-dependentH _c2 as well. Intrinsic magnetic impurities arising from structural disorder and defects are possibly the origin of these anomalous superconducting state properties of Lu₂Fe₃Si₅.     

Design and operation of a very large ring laser gyroscope

The design and initial operation of a vertical square He-Ne ring laser G0 with a perimeter of 14 m is discussed. This builds on earlier demonstrations of the feasibility of large ring lasers (perimeter approximately 4 m) for single-mode gyroscope operation and with lesser pulling than navigation gyroscopes. With servoing of the rf excitation to yield single-mode operation, G0 gave a quality factor 1 x 10(12) and a Sagnac line with a frequency of 287.8 +/- 1.0 Hz induced by Earth rotation Omega(E). This has confirmed some vital questions over the feasibility of very large gyroscopes for geodetic measurements at the level of 10(-9) Omega(E).     

Cavity QED with semiconductor nanocrystals

We report on a strongly coupled cavity quantum electrodynamic (CQED) system consisting of a CdSe nanocrystal coupled to a single photon mode of a polymer microsphere. The strong exciton-photon coupling is manifested by the observation of a cavity mode splitting variant Planck's over 2piOmega(exp) between 30 und 45 microeV and photon lifetime measurements of the coupled exciton-photon state. The single photon mode is isolated by lifting the mode degeneracy in a slightly deformed microsphere cavity and addressing it by high-resolution imaging spectroscopy. This cavity mode is coupled to a localized exciton of an anisotropically shaped CdSe nanocrystal that emits highly polarized light in resonance to the cavity mode and that was placed in the maximum electromagnetic field close to the microsphere surface. The exciton confined in the CdSe nanorod exhibits an optical transition dipole moment much larger than that of atoms, the standard system for CQED experiments, and a low-temperature homogeneous line width much narrower than the high-Q cavity mode width. The observation of strong coupling in a colloidal semiconductor nanocrystal-cavity system opens the way to study fundamental quantum-optics phenomena and to implement quantum information processing concepts that work in the visible spectral range and are based on solid-state nanomaterials.     

On the reassessment of doses in TL-dosimetry by measuring the residual dose

Second readouts and the photo-transferred thermoluminscence (PTTL) method are sometimes used to reassess high doses. When using the common LiF:Mg,Ti, if the second readout is performed by a regular readout cycle of 13.3 s, its efficiency is low and the estimations cannot be obtained with acceptable accuracy for low doses in the 10-100 mSv range. By applying the PTTL method, the efficiency is much higher, but a high background is also present, deteriorating the quality of the reassessment. A simple and efficient method was studied, which consists of expanding the heating time to 30 s. Although the efficiency relative to a standard readout is improved by only a factor of 3, the low background enables to obtain results with the same uncertainty as the more complicated PTTL method. By applying region of integration discrimination, the errors can be further diminished.