Interaction between dietary protein and fat in triglyceride metabolism in the rat: Effects of soy protein and menhaden oil

The objective of the present study was to determine the mechanisms by which dietary proteins interact with dietary lipids in the regulation of triglyceridemia in rats. Male Sprague-Dawley rats (n=56) were subjected to 28-d experimental diets containing different combinations of proteins (20% w/w) and lipid sources (14% w/w): (i) casein-menhaden oil, (ii) casein-beef tallow, (iii) soy protein-menhaden oil, and (iv) soy protein-beef tallow. Significant protein-lipid interactions were observed on triglyceridemia and hepatic cholesterol in fasted rats. The combination of casein and beef tallow was associated with high plasma TG and hepatic cholesterol concentrations, which were reduced by substitution either of soy for casein or of menhaden oil for beef tallow. Therefore, triglyceridemia and liver cholesterol remained low with soy protein feeding, independently of the lipid source, as well as with menhaden oil feeding, regardless of the protein source. The menhaden oil diets reduced plasma cholesterol, hepatic TG, and TG secretion compared with beef tallow diets independently of the dietary protein source. Modifying the source of dietary proteins and lipids had no effect on post-heparin plasma lipoprotein lipase activity. These results demonstrate that soy protein can lower rat triglyceridemia relative to casein when associated with beef tallow consumption, whereas menhaden oil can attenuate hypertriglyceridemia when rats are fed casein. The data further suggest that part of the hypotriglyceridemic effect of soy protein in the rat may be mediated by reduced hepatic lipid synthesis, as is the case for menhaden oil.     

High-Temperature Crack Growth in Monolithic and SiCw-Reinforced Silicon Nitride under Static and Cyclic Loads

Experimental results are presented on subcritical crack growth under sustained and cyclic loads in a HIPed Si₃N₄ at 1450°C and a hot–pressed Si₃N₄–10 vol% SiC_w composite in the temperature range 1300°–1400°C. Static and cyclic crack growth rates are obtained from the threshold for the onset of stable fracture with different cyclic frequencies and load ratios. Fatigue crack growth rates for both the monolithic and SiC_w-reinforced Si₃N₄ are generally higher than the crack growth velocities predicted using static crack growth data. However, the threshold stress intensity factor ranges for the onset of crack growth are always higher under cyclic loads than for sustained load fracture. Electron microscopy of crack wake contact and crack–tip damage illustrate the mechanisms of subcritical crack growth under static and cyclic loading. Critical experiments have been conducted systematically to measure the fracture initiation toughness at room temperature, after advancing the crack subcritically by a controlled amount under static or cyclic loads at elevated temperatures. Results of these experiments quantify the extent of degradation in crack–wake bridging due to cyclically varying loads. The effects of preexisting glass phase on elevated temperature fatigue and fracture are examined, and the creep crack growth behavior of Si₃N₄–based ceramics is compared with that of oxide-based ceramics.     

Theoretical analysis on bending behavior of functionally graded composite beam crack-controlled by ultrahigh toughness cementitious composites

Ultrahigh toughness cementitious composites (UHTCC) obviously show strain hardening property under tensile or bending loading. The failure pattern of the UHTCC components exhibits multiple fine cracks under uniaxial tensile loading with prominent tensile strain capacity in excess of 3%, with merely 60 μm average crack width even corresponding to the ultimate tensile strain state. The approach adopted is based on the concept of functionally-graded concrete, where part of the concrete, which surrounds the main longitudinal reinforcement in a RC (reinforced concrete) member, is strategically replaced with UHTCC with excellent crack-controlling ability. Investigations on bending behavior of functionally-graded composite beam crack controlled by UHTCC has been carried out, including theo- retical analysis, experimental research on long composite beams without web reinforcement, validation and comparison between experimental and theoretical results, and analysis on crack control. In addition to improving bearing capacity, the results indicate that functionally-graded composite beams using UHTCC has been found to be very effective in preventing corrosion-induced damage compared with RC beams. Therefore, durability and service life of the structure could be enhanced. This paper discusses the development of internal force and crack propagation during loading process, and presents analysis of the internal force in different stages, moment-curvature relationship from loading to damage and calculation of mid-span deflection and ductility index. In the end, the theoretical formulae have been validated by experimental results.     

Impact fracture behavior of continuous glass fiber-reinforced nylon 6

The impact fracture toughness of nylon 6/continuous glass fiber composites at four levels of fiber content has been studied. The composites were produced by anionically polymerizing caprolactam within a glass mat using a vacuum injection technique. Application of linear elastic fracture mechanics to characterize the impact fracture toughness of the composites, using an energy approach (G_IC), has been found to be applicable provided that a correction is made for the size of the damage zone. The concept of J_c, fracture energy per unit ligament area, has also been applied to the composites and agreement between G_IC and J_c has been found to be reasonably satisfactory. The ratio of crack propagation energy to the total energy absorbed (ductility index) has also been calculated. The ductility index was found to be close to one for the composites, indicating that additional energy is involved in propagating the fracturing cracks probably due to fiber debonding and/or crack blunting and fiber pullout. Fractographic examination of the impact fracture surface confirmed the presence of these features.     

Structure–property relationship of HTPB-based propellants. III. Optimization trials with varying levels of diol–triol contents

A systematic study has been conducted on a composite solid propellant formulation using hydroxyl-terminated polybutadiene (HTPB) prepolymer with varying molecular weights and hydroxyl values. Fairly extensive regions of resin parameters have been studied. Contours of important propellant properties have been laid down. In this set of experiments, varying levels of diol and triol contents were used at two different NCO/OH ratios to arrive at the optimum level needed for different grades of HTPB resin. It is seen that different grades of HTPB resin require varying levels of diol–triol contents to give similar properties for the end product. Also, for the best performance, varying the diol–triol ratio at the optimum level of the diol–triol content is necessary. © 1994 John Wiley & Sons, Inc.     

Studies of surface and gas reactions in a catalytically stabilized combustor

A numerical investigation of a catalytically stabilized thermal (CST) combustor was conducted for a multichannel catalyst bed, and both the catalyst bed and thermal combustor were simultaneously modeled. The numerical model handled the coupling of the surface and gas reaction in the catalyst bed as well as the gas reaction in the thermal combustor. The behavior of the catalyst bed was investigated at a variety of operating conditions, and location of the flame in the CST combustor was investigated via an analysis of the distribution of CO concentration. Through parametric analyses of the flame position, it was possible to derive a criterion to determine whether the flame is present in the catalyst bed or the thermal combustor for a given inlet condition. The results showed that the maximum inlet temperature at which the flame is located in the thermal combustor increased with increasing inlet velocity.     

Very long chain PUFA in murine testicular triglycerides and cholesterol esters

Very long chain (VLC) PUFA of the n−6 and n−3 series are known to occur in mammalian testis. The aim of this work was to characterize further two testicular lipid classes with VLCPUFA, cholesterol esters (CE) and total triglycerides (TG) in rat and mouse testis. The VLCPUFA predominating in these lipids were a series of n−6 pentaenes and tetraenes with 24 to 32 carbons, including small amounts of odd-chain PUFA, 28∶5n−6 and 24∶5n−6 prevailing in CE and TG, respectively. Most of the VLCPUFA of TG were concentrated in a small fraction of TG, made up by 1-O-alkyl-2,3-DAG. This TG subclass was absent altogether from the TG of sexually immature testis. The TG and the CE with VLCPUFA only occurred in testis of adult fertile animals. The proportion of VLCPUFA in total TG and CE was higher in rodents than in other mammals. In the n−6 PUFA-rich adult mouse testis, the amounts of testicular triacylglycerols decreased significantly after consumption of fish oil for 2 wk. Whereas 18∶2n−6 was significantly reduced, the amounts of 22∶5n−6 and longer n−6 PUFA were less affected in all mamor testicular lipids including PC and PE, where they were unchanged. The 1-O-alkyl-2,3-DAG and their n−6 VLCPUFA were virtually unaffected by the diet. The VLCPUFA-containing molecular species of CE and TG may represent a form of storage of cholesterol and polyenoic FA required to sustain spermatogenesis. Via chain-shortening, VLCPUFA stored in the neutral lipids may serve as precursors of the major C₂₂ PUFA typical of cell membrane glycerophospholipids, protecting testicular cells against shifts in FA composition induced by dietary changes.     

大孔强酸树脂吸附硫脲金

研究了D072大孔强酸性阳离子交换树脂从硫脲[Tu=CS(NH2)2]浸金液中吸附Au(Tu)2+的性能和机理. 结果表明，pH=2.0时，树脂对Au(Tu)2+有优良的吸附性能，金的交换容量为78.95 mg/g (Au/干树脂)，吸附的硫脲金可用乙醇-硫酸水溶液洗脱，洗脱率可达96.5%. D072树脂对Au(Tu)2+的吸附符合Langmuir吸附模型.     

<Emphasis Type="Italic">Penicillium</Emphasis> sp. ZD-Z1 chitosanase immobilized on DEAE cellulose by cross-linking reaction

Chitosanase obtained fromPenicillium sp.ZD-Z1 was immobilized on DEAE cellulose with glutaraldehyde by cross-linking reaction. The optimal conditions of immobilization were as follows: 0.1 g DEAE cellulose was treated with 5 ml 5% glutaraldehyde solution; then 2.3 mg chitosanase was immobilized on the carrier. The optimal temperature and pH was 60 °C and 4.0, and the K _m value was 18.87 g/L. Under optimal conditions, the activity of immobilized enzyme is 1.5 U/g, and the recovery of enzyme activity is 81.3%. After immobilization, the optimal temperature and K _m value increased (from 50 °C to 60 °C, from 2.49 g/L to 18.87 g/L), whereas the optimal pH was reduced (from 5.0 to 4.0). The enzyme activity loss was less than 20% after 10 times batch reaction; the immobilized enzyme showed good operation stability.     

Hydrothermal synthesis of LA-MN-Hexaaluminates for the catalytic combustion of methane

Hydrothermal synthesis by using urea hydrolysis at 1.0-3.0 MPa and 120-130 ‡C was employed to prepare Mn-substituted hexaaluminate catalysts for methane combustion. The results from DTA-MS demonstrated that CO_3- and Off anions co-exist in the hydrothermal reaction. XRD reveals that the components of carbonates and hydroxides in the hydrothermal reaction are more favorable than those in the (NH₄)₂CO₃ co-precipitation for the formation of the Mn-substituted hexaaluminate phase. After calcination at 1,200 ‡C for 2 h, LaMnAl₁₁O₁₉ is the major phase of the catalyst prepared by the hydrothermal synthesis method while LaAlO₃ is the major one of the catalysts prepared by NH₄OH and (NH₄)₂CO₃ co-precipitation. The catalyst prepared by hydrothermal synthesis has higher activity than that prepared by NH₄OH and (NH₄)₂CO₃ co-precipitation. The major reason is that more Mn²⁺ ions have incorporated into the hexaaluminate lattice. The effect of drying methods on the formation of hexaaluminate phase was also discussed.