Dielectric and conducting behavior of pyrene functionalized PANI/P(VDF‐co‐HFP) blend

Herein, we present the dielectric and electrical conductivity properties of the partially miscible polymer blend prepared using pyrene functionalized polyaniline (pf‐PANI) and poly(vinylidene fluoride‐co‐hexafluoro propylene) (PVDF‐co‐HFP). The blend mostly retains the fluorescent nature of pf‐PANI as well as can be moldable and possesses good damping property. The dielectric properties have been investigated as a function of temperature at three different frequencies and the plausible origin of polarization responsible for dielectric behavior in this blend has been identified. The experimental results of dielectric measurements are compared with theoretical models and discussed. The surface morphology of the samples has been examined with a scanning electron microscope. The electrical conductivity has also been studied as a function of temperature and explained in terms of hopping of charge carriers/interconnected networks. The combined dielectric and conductivity results together with scanning electron microscope micrographs, reveal that there is hindrance to achieve percolation threshold even after pf‐PANI addition of 57 vol % and subsequent thermal treatment. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44077.     

Effect of Ionic Liquids on Surface and Aggregation Properties of Non-ionic Surfactant Triton™ X-100 in Aqueous Media

The effect of the hydrophilic ionic liquids (ILs) 1-butyl-2,3-dimethylimidazolium bromide [bdmim][Br] and 1-hexyl-2,3-dimethylimidazolium bromide [hdmim][Br] on the aggregation and surface active behaviour of the non-ionic surfactant Triton? X-100 (TX-100) was studied in aqueous media. Several aggregation properties of TX-100 + IL/water systems, such as critical micelle concentration (CMC), surface active parameters, aggregation number (N _agg) and aggregate size, were determined by surface tension, fluorescence and dynamic light scattering (DLS) techniques. It was found that the average micellar size and aggregation number decrease, whereas the CMC increases with increasing concentration of ILs. Interestingly, the CMC value of TX-100 is reduced slightly below 0.5 wt% of both the ILs in the medium. At higher wt% of IL in the system the CMC increases. It was demonstrated that ILs [bdmim][Br] and [hdmim][Br] can be judiciously used at different wt% for modifying the physico-chemical properties of TX-100.     

Visible Light Photocatalysis on Magnetically Recyclable Fe3O4/Cu2O Nanostructures

Catalysis Letters - Magnetically recyclable visible light photocatalysts for the degradation of critical organic pollutants are an urgent industrial requirement. Nonetheless, one component...     

Extraction of fibers from saccharum munja grass and its application in composites

With growing environmental awareness, ecological concerns and new legislations, natural fiber‐reinforced plastic composites have received increasing attention during the recent decades. The natural fiber composites have many advantages over traditional glass fiber composites, including lower cost, lighter weight, environmental friendliness, and recyclability. This article reports the findings of the studies done on a new fiber, hitherto unexplored, extracted from Saccharum munja grass. The extracted fibers were further treated using sodium hydroxide to improve its performance in composites. Both treated and untreated fiber‐reinforced composites were prepared by hand lay‐up process using unsaturated polyester resin. Mechanical properties and thermal behavior of the composites were evaluated. The improvement in properties was found for alkali‐treated fiber composites. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40829.     

Encapsulation of animal wax‐based organogels in alginate microparticles

Encapsulation of organogels is a novel perspective in the field of controlled drug delivery. This study reports encapsulation of lanolin based organogels within alginate microparticles. The microparticles were prepared by emulsification/internal gelation method. Microscopic studies suggested spherical shape of the microparticles. Fourier transform infrared, X‐ray diffraction and thermal studies confirmed the presence of organogels within the microparticles. Organogels containing microparticles showed improved drug (e.g., salicylic acid and metronidazole) entrapment efficiency. The release of the drugs from the microparticles was dependent on the pH of the dissolution medium. The release was diffusion mediated. The drug loaded microparticles showed antimicrobial activity against E. coli and B. subtilis. The preliminary study suggested that the encapsulation of the organogels may help prolonging the release of the drugs and hence may be tried as vehicles for controlled drug delivery. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40910.     

Palm oil‐based organogels and microemulsions for delivery of antimicrobial drugs

This study has been designed to develop palm oil (PO) based organogels using span 80/tween 80 mixture (OG) as a gelator system by fluid‐filled structure mechanism. The results suggested formation of organogels, emulsions, and microemulsions as the proportions of PO, OG and water were varied. The emulsions were found to be thermodynamically unstable as compared to the organogels and the microemulsions. Accelerated thermal stability test suggested that all the microemulsions and the organogels of only eight compositions were stable. The organogels showed viscoelastic property while the microemulsions showed viscous flow behavior. Both the organogels and the microemulsions were found to be highly hemocompatible and nonirritant. The antimicrobial efficiency of the ciprofloxacin HCl‐loaded formulations showed equivalent efficiency as compared to marketed formulations. The rates of drug release from the organogels were found to be relatively slower as compared to the microemulsions. The preliminary studies suggested that the developed organogel and microemulsion‐based formulations may be tried for topical delivery of antimicrobials. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 39979.     

Performance enhancement and energy reduction using hybrid cryogenic distillation networks for purification of natural gas with high CO2 content

A novel concept of hybrid cryogenic distillation network has been explored which maximizes the benefits of both desublimation or solid-vapor based separation as well as distillation or vapor-liquid equilibrium based separation during the separation of carbon dioxide from methane or natural gas. Process network synthesis has been performed for four case studies with high carbon dioxide (72 mole%) and medium carbon dioxide (50 mole%) natural gas feed streams. The benefits of optimal locations for cryogenic packed beds were investigated. A conventional cryogenic network consisting of multiple distillation columns with butane as additive for extractive distillation was also studied and presented in this paper. Process modeling of cryogenic distillation network with MESH equations was attempted using an integrated dual loop (C+3) convergence and the results were compared with Aspen Plus simulator for benchmarking. The prediction of solidification region was employed using experimental data from literature to avoid solidification regions in the column. The proposed hybrid cryogenic distillation network showed promising potential for energy and size reduction.     

A Generalized Relationship for Determination of Tensile Strength of Fine-Grained Soils from Shrinkage Characteristics

Tensile strength of fine-grained soils has been extensively investigated by earlier researchers and several methodologies have been evolved for its determination. However, either most of these methods are not valid/applicable for a wide range of moisture contents or they involve tedious sample/specimen preparation. In this context, the methodology of determining tensile strength by employing thin films, which is available in the literature, has been found to be quite handy and useful. It has been observed that a unique relationship exists among the tensile strength, moisture content, and shrinkage characteristics of fine-grained soils. This methodology is appreciable due to its applicability to a wide range of moisture contents, comparable ease of sample preparation and testing, and the obtained results lack generalization. Exhaustive tests were conducted on fine-grained soils of entirely different characteristics and generalized relationships have been proposed between the percentage linear shrinkage, tensile strength, and moisture content (defined as liquid to solid ratio). Based on a critical analysis of the results available in the literature, the efficiency of such relationships for determination of tensile strength of fine-grained soils has been demonstrated. In the authors’ opinion, such relationships would be quite useful for determining tensile strength of fine-grained soils from their linear shrinkage, which can easily be measured in a conventional geotechnical engineering laboratory.     

Phenotypic identification and technological properties of lactic acid bacteria isolated from traditionally processed fish products of the Eastern Himalayas

Sukako maacha, gnuchi, sidra and sukuti are traditional smoked and sun-dried fish products of the Eastern Himalayan regions of Nepal and India. A total of 40 samples of sukako maacha (14), gnuchi (6), sidra (10) and sukuti (10) were collected and were analysed for microbial load. Population of lactic acid bacteria (LAB) as well as aerobic mesophilic counts ranged from 4.7-8.3 to 5.1-8.5 log cfu g(-1), respectively. A total of 189 strains of LAB were isolated from sukako maacha, gnuchi, sidra and sukuti samples, out of which 171 strains were cocci and 15 strains, were heterofermentative lactobacilli. LAB were identified on the basis of phenotypic characters including API system as Lactococcus lactis subsp. cremoris, Lactococcus lactis subsp. lactis, Lactococcus plantarum, Leuconostoc mesenteroides, Enterococcus faecium, Enterococcus faecalis, Pediococcus pentosaceus and Weissella confusa. LAB strains produced a wide spectrum of enzymes. Some strains of LAB showed antagonistic properties against pathogenic strains. None of the strains produced biogenic amines in the method applied. This paper is the first report on the microbial composition, mostly lactic acid bacteria, of traditionally processed fish products of Eastern Himalayas.