Design of observer based nonlinear model predictive controller for a continuous stirred tank reactor

Model predictive control (MPC) schemes are now widely used in process industries for the control of key unit operations. Linear model predictive control (LMPC) schemes which make use of linear dynamic model for prediction, limit their applicability to a narrow range of operation (or) to systems which exhibit mildly nonlinear dynamics.

In this paper, a nonlinear observer based model predictive controller (NMPC) for nonlinear system has been proposed. An approach to design NMPC based on fuzzy Kalman filter (FKF) and augmented state fuzzy Kalman filter (ASFKF) has been presented. The efficacy of the proposed NMPC schemes have been demonstrated by conducting simulation studies on the continuous stirred tank reactor (CSTR). The analysis of the extensive dynamic simulation studies revealed that, the NMPC schemes formulated produces satisfactory performance for both servo and regulatory problems. Simulation results also include an inferential control case, where the reactor concentration is not measured but estimated from temperature measurement and used in the NMPC based on FKF and ASFKF formulations.     

Configuring and enhancing measurement systems for damage identification

Engineers often decide to measure structures upon signs of damage to determine its extent and its location. Measurement locations, sensor types and numbers of sensors are selected based on judgment and experience. Rational and systematic methods for evaluating structural performance can help make better decisions. This paper proposes strategies for supporting two measurement tasks related to structural health monitoring - (1) installing an initial measurement system and (2) enhancing measurement systems for subsequent measurements once data interpretation has occurred. The strategies are based on previous research into system identification using multiple models. A global optimization approach is used to design the initial measurement system. Then a greedy strategy is used to select measurement locations with maximum entropy among candidate model predictions. Two bridges are used to illustrate the proposed methodology. First, a railway truss bridge in Zangenberg, Germany, is examined. For illustration purposes, the model space is reduced by assuming only a few types of possible damage in the truss bridge. The approach is then applied to the Schwandbach bridge in Switzerland, where a broad set of damage scenarios is evaluated. For the truss bridge, the approach correctly identifies the damage that represents the behaviour of the structure. For the Schwandbach bridge, the approach is able to significantly reduce the number of candidate models. Values of candidate model parameters are also useful for planning inspection and eventual repair.     

Intrusion Detection System in Wireless Sensor Network Using Conditional Generative Adversarial Network

Wireless communication networks have much data to sense, process, and transmit. It tends to develop a security mechanism to care for these needs for such modern-day systems. An intrusion detection system (IDS) is a solution that has recently gained the researcher’s attention with the application of deep learning techniques in IDS. In this paper, we propose an IDS model that uses a deep learning algorithm, conditional generative adversarial network (CGAN), enabling unsupervised learning in the model and adding an eXtreme gradient boosting (XGBoost) classifier for faster comparison and visualization of results. The proposed method can reduce the need to deploy extra sensors to generate fake data to fool the intruder 1.2–2.6%, as the proposed system generates this fake data. The parameters were selected to give optimal results to our model without significant alterations and complications. The model learns from its dataset samples with the multiple-layer network for a refined training process. We aimed that the proposed model could improve the accuracy and thus, decrease the false detection rate and obtain good precision in the cases of both the datasets, NSL-KDD and the CICIDS2017, which can be used as a detector for cyber intrusions. The false alarm rate of the proposed model decreases by about 1.827%.

     

A Workflow Scheduling Method for Cloud Computing Platform

Wireless Personal Communications - Scheduling in computing environments such as homogeneous and heterogonous is very challenging and faces various difficulties computationally. This computing needs...     

The synthesis of pixelated metamaterial cross polarizer using binary wind driven optimization algorithm

Microsystem Technologies - In this paper synthesis of two wideband Metamaterial Cross Polarizer (MCPs) is proposed. The synthesis of proposed MCPs is done by using Binary Wind Driven Optimization...     

Experimental investigations in powder mixed electric discharge machining of Ti–35Nb–7Ta–5Zrβ-titanium alloy

The present research is the first type of study in which the application of powder mixed electrical discharge machining (PMEDM) for the machining of β-phase titanium (β-Ti) alloy has been proposed. β-Ti alloys are new range of titanium alloys, which has a wide-spread application in dental, orthopedics, shape memory, and stents. The aim of the present study is to fabricate submicro- and nanoscale topography by PMEDM process to enhance the biocompatibility without affecting machining efficiency. The effect of Si powder concentration along with pulse current and duration on the surface and machining characteristics has been investigated. A significant decrease in surface crack density on the machined surface with 4 g/l Si powder concentration was observed. When β-Ti alloy was modified at 15 A pulse current, longer pulse interval with 8 g/l concentration of Si powder particles, the interconnected surface porosities with pore size 200–500 nm was observed. Moreover, at Si powder concentrations of 2 g/l and 4 g/l, the recast layer thickness is 8 µm and 2–3 µm, respectively. Elemental mapping analysis confirmed that PMEDM also generated carbides and oxides enriched surface, a favorable surface chemistry to enhance the biocompatibility of β-Ti alloy. Furthermore, PMEDM also enhances the machining performance by improving material removal rate and reducing tool wear rate.     

A novel application of micro-EDM process for the generation of nickel nanoparticles with different shapes

This article explains production of nickel nanoparticles through a micro-electrical discharge machining (EDM) process with a combination of different process parameters. The production of nickel nanoparticles was carried out in a dielectric medium (deionized water) with developed micro-EDM while polyvinyl alcohol worked as the stabilizing agent. The characterization of nickel nanoparticle was done by scanning electron microscope (SEM), Energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), UV–Vis spectroscopy, and Fourier transform infrared (FTIR) analysis. From this investigation, the mean crystal size of the nickel nanoparticles was found to be in the range of 15–20?mm for a pulse-on time variation of 2–0.3?µs and the crystal size was found to decrease with the decrease of pulse-on time. It was also observed that with this decrease, the shape and size of nickel nanoparticles change from spherical to needle-like. The dispersion stability of nickel nanofluid was determined by viscosity measurements and the dynamic viscosity was noted to decrease by decreasing the pulse duration. From the FTIR spectrum results, it was confirmed that the synthesized nickel nanoparticles in deionized water were pure and monolithic. UV–Vis–NIR spectroscopy depicted that the band gap energy increases with a reduction in the pulse-on time and obtains a higher band gap (5.31?eV) for 0.3?µs pulse-on time.     

Optical detection of CA 15.3 breast cancer antigen using CdS quantum dot

The present study focus on optical sensing of breast cancer antigen 15.3 (CA 15.3) using cadmium sulphide quantum dot (CdS‐QD) in saline and serum samples spiked with antigen. The surface of CdS‐QD was modified by cysteamine capping followed by tagging of CA 15.3 antibody. The samples were characterised using UV‐visible absorption spectroscopy (UV‐VIS Spectroscopy), Fourier transform infrared spectroscopy (FTIR), high‐resolution transmission electron microscopy (HRTEM) attached with energy‐dispersive X‐ray spectroscopy, phase contrast inverted epi‐fluorescence microscopy and photoluminescence (PL) spectrophotometry (EDS). The CdS‐QD showed a mean diameter of 3.02 ± 0.6 nm. The complex formed after antigen‐antibody interaction resulted in distinguishable optical and fluorescence intensity with respect to varying concentration of antigen. The PL study revealed that CA 15.3 antibody labelled CdS QD can detect CA 15.3 tumour marker even at very low concentration of 0.002 KU/L with a constant response time of 15 min. This study clearly indicates that detection of CA 15.3 at low concentration is possible using surface modified CdS QD in serum samples and can find immense applications in biosensor development for detection of breast cancer marker similar to various automated detection kits available in market.Inspec keywords: semiconductor quantum dots, cadmium compounds, II‐VI semiconductors, wide band gap semiconductors, cancer, tumours, optical sensors, biosensors, biomedical equipment, visible spectra, ultraviolet spectra, Fourier transform infrared spectra, transmission electron microscopy, X‐ray chemical analysis, fluorescence, optical microscopy, photoluminescence, proteins, molecular biophysics, nanosensors, nanomedicine, nanoparticlesOther keywords: optical detection, CA 15.3 breast cancer antigen, optical sensing, cadmium sulphide quantum dot, saline samples, serum samples, cysteamine capping, CA 15.3 antibody, UV‐visible absorption spectroscopy, Fourier transform infrared spectroscopy, high‐resolution transmission electron microscopy, energy dispersive X‐ray spectroscopy, phase contrast inverted epifluorescence microscopy, photoluminescence spectrophotometry, antigen‐antibody interaction, fluorescence intensity, optical intensity, CA 15.3 tumour marker, surface modified CdS QD, biosensor development, time 15 min, CdS     

Effect of friction stir processing and hybrid reinforcements on copper

In this research, a copper based surface composite was fabricated through dispersing hybrid composite particles onto its surface through friction stir processing (FSP) technique. Optical micrographs and scanning electron microscopy images indicates finer refinement of grains and particles dispersion into matrix along with its bonding and particle separation. As per the outcomes of microhardness analysis, hardness of the developed surface composite shows increment with increase in dispersion of volume fraction of hybrid particles. Strength of the developed copper surface composite exhibited a positive trend with introduction of hybrid reinforcement particle onto the surface of the composite but yet again ductility reduced. Wear resistance of the composite increased with reinforcement addition and the same was supported through worn out surface morphology. Fluctuations in friction coefficient value reduced with increase in particles, as for the presence in BN particles while the average frictional coefficient value was observed increasing. A reduction in corrosion rate was observed with increase in reinforcement particle dispersion onto copper matrix through FSP.     

Life cycle energy and carbon footprint analysis of photovoltaic battery microgrid system in India

Electricity supply in India is from a centralized grid. Many parts of the country experience grid interruptions. Life cycle energy and environmental analysis has been done for a 27 kWp photovoltaic system which acts as grid backup for 3 h outage in an Indian urban residential scenario. This paper discusses energy requirements and carbon emission for a PV storage system for five different battery technologies in Indian context. This can be used as a metric for comparative analysis for new batteries, with an undeveloped market. The energy requirements for the components are quantified and are compared in terms of energy payback time (EPBT) and Net Energy Ratio (NER). All the calculations are done for Indian context. EPBT is found to be in the range of 2–4.5 years for all the systems, while NER is in the range of 6.6–2.52. NaS has the highest emission factor of 0.67 kgCO₂/kWh and the least for NiCd (0.091 kgCO₂/kWh). These factors can be used to select a PV battery option and to target selection of materials and systems based on the reported values.