Enhanced Low Complex Double Error Correction Coding with Crosstalk Avoidance for Reliable On-Chip Interconnection Link

As the technology scales down, shrinking geometry and layout dimension, on- chip interconnects are exposed to different noise sources such as crosstalk coupling, supply voltage fluctuation and temperature variation that cause random and burst errors. These errors affect the reliability of the on-chip interconnects. Hence, error correction codes integrated with noise reduction techniques are incorporated to make the on-chip interconnects robust against errors. The proposed error correction code uses triplication error correction scheme as crosstalk avoidance code (CAC) and a parity bit is added to it to enhance the error correction capability. The proposed error correction code corrects all the error patterns of one bit error, two bit errors. The proposed code also corrects 7 out of 10 possible three bit error patterns and detects burst errors of three. Hybrid Automatic Repeat Request (HARQ) system is employed when burst errors of three occurs. The performance of the proposed codec is evaluated for residual flit error rate, codec area, power, delay, average flit latency and link energy consumption. The proposed codec achieves four magnitude order of low residual flit error rate and link energy minimization of over 53 % compared to other existing error correction schemes. Besides the low residual flit error rate, and link energy minimization, the proposed codec also achieves up to 4.2 % less area and up to 6 % less codec power consumption compared to other error correction codes. The less codec area, codec power consumption, low link energy and low residual flit error rate make the proposed code appropriate for on chip interconnection link.     

Synthesis and characterization of mesoporous Si-MCM-41 materials and their application as solid acid catalysts in some esterification reactions

Mesoporous MCM-41 has been synthesized by sol–gel method at room temperature possessing good thermal stability, high surface area as well as retention of surface area at high temperature. The MCM-41 neutral framework has been modified and put to practical use by incorporating Al³⁺ in the siliceous MCM-41 framework and supporting 12-TPA (12-tungstophosphoric acid) onto MCM-41 by process of anchoring and calcination to induce Brønsted acidity in MCM-41 to yield Al-MCM-41 and 12TPA-MCM-41, respectively. The synthesized materials have been characterized for elemental analysis by ICP-AES, XRD, SEM, TEM, EDX, FT–IR and TGA. Surface area has been determined by BET method and pore size and pore size distribution determined by BJH method. Surface acidity has been evaluated by NH₃-TPD method. The potential use of Al-MCM-41 and 12TPA-MCM-41 as solid acid catalysts has been explored and compared by studying esterification as a model reaction wherein monoesters such as ethyl acetate (EA), propyl acetate (PA), butyl acetate (BA) and benzyl acetate (BzA) have been synthesized, optimizing several parameters such as catalyst amount, reaction time, reaction temperature and mole ratio of reagents.     

A novel nanostructured iron oxide-gold bioelectrode for hydrogen peroxide sensing

Fe(3)O(4) nanoparticles covalently linked to a gold electrode have been used for immobilizing catalase (CAT) enzyme to sense the presence of various concentrations of H(2)O(2). These nanoparticles ranging from 20 to 30 nm were synthesized by thermal co-precipitation of ferric and ferrous chlorides. SEM and XRD have been used for morphological and structural characterization of Fe(3)O(4) nanoparticles. CAT enzyme was linked covalently to the surface of iron oxide using carbodiimide in phosphate buffer (pH 7.4) at 4?°C. The enzyme-iron oxide link was confirmed by FT-IR spectroscopy. Sensing studies carried out using cyclic voltammetry showed a linear response of the CAT/nano Fe(3)O(4)/Au bioelectrode towards H(2)O(2) between 1.5 and 13.5 μM with a very sharp response time of 2 s.     

Electrical and thermal properties of PTFE-Sr<Subscript>2</Subscript>ZnSi<Subscript>2</Subscript>O<Subscript>7</Subscript> composites

A new polymer-ceramic composite was prepared using PTFE and low loss Sr₂ZnSi₂O₇. The dielectric properties of the composite were studied in the microwave and radiofrequency ranges. The relative permittivity (ε_r) and dielectric loss (tan δ) increased with the filler loading from 0.10 to 0.50 volume fractions (v_f). The observed values of ε_r, thermal conductivity and coefficient of thermal expansion (CTE) were compared with the corresponding theoretical predictions. The ability of the composite towards moisture absorption resistance was studied as a function of filler loading. It was also found that the variation of ε_r was less than 2% in the temperature range 25–90 °C, at 1 MHz. For a filler content of 0.50 v_f, the PTFE/Sr₂ZnSi₂O₇ composite exhibited ε_r = 4.4_, tan δ = 0.003 (at 4–6 GHz), CTE = 38.3 ppm/°C, thermal conductivity = 2.1 W/mK and moisture absorption = 0.09 wt%.     

Reliability comparison of an n cascade system with the addition of an n strength system

In the present paper we are comparing the reliability of two models: (i) the cascade system and (ii) the system having n strengths on a single stress. In both the cases the system has n strengths and a single stress. In the first case n strengths are cascaded and for each attack the stress is decreased. Whereas in the second case n strengths act in combination on the stress component. From the results obtained we can observe that when the attenuation factor is less than 0.5 the cascade model is more reliable, otherwise the second one is more reliable. Hence we infer that, at each attack, if the stress decreases the cascade model is more reliable.     

Nonrandomness in protein sequences: evidence for a physically driven stage of evolution?

The sequences, or primary structures, of existing biopolymers--in particular, proteins--are believed to be a product of evolution. Are the sequences random? If not, what is the character of this nonrandomness? To explore the statistics of protein sequences, we use the idea of mapping the sequence onto the trajectory of a random walk, originally proposed by Peng et al. [Peng, C.-K., Buldyrev, S. V., Goldberger, A. L., Havlin, S., Sciortino, F., Simons, M. & Stanley, H. E. (1992) Nature (London) 356, 168-170] in their analysis of DNA sequences. Using three different mappings, corresponding to three basic physical interactions between amino acids, we found pronounced deviations from pure randomness, and these deviations seem directed toward minimization of the energy of the three-dimensional structure. We consider this result as evidence for a physically driven stage of evolution.     

Adenosine deaminase in differential diagnosis of peripheral lymph node tuberculosis

Improved hemodynamics and blood flow have been reported in patients with IABPs who experience cardiopulmonary arrest and require CPR. The following research questions, however, remain unanswered: Is there a more effective method of using IABP to prevent cardiac arrest and the need for CPR? Is the timing of balloon inflation and deflation the same for patients undergoing CPR as it is for patients who do not require CPR? Would earlier or later inflation or deflation further enhance cerebral or systemic blood flow? What are the most effective ways for healthcare staff to maintain competency skills in CPR in patients with IABPs?     

Effect on normal vaginal flora of three intravaginal microbicidal agents potentially active against human immunodeficiency virus type 1

The effect on normal vaginal flora of three intravaginal microbicides potentially active against human immunodeficiency virus type 1 was examined. Volunteers received dextrin sulfate (D2S), nonoxynol-9 (N-9), or docusate sodium in separate placebo-controlled studies. High vaginal swabs were obtained for bacterial culture before and after microbicide application. D2S did not affect the vaginal flora. However, lactobacilli decreased by > or = 10(2) cfu/mL in 9 (56%) of 16 women given N-9 and in 5 (63%) of 8 women given docusate sodium. Women using N-9 were also significantly more likely to become colonized abnormally (usually with aerobic gram-negative rods) than were those using placebo, as were women using docusate sodium. Women with reduced lactobacilli were less likely to regain normal flora than were those whose lactobacilli were unaffected. However, coliform colonization occurred whether lactobacilli produced H2O2 or not. Continuous use of N-9 could induce susceptibility to urinary and gynecological infection. It is essential that potential microbicides are examined for activity against normal vaginal flora.