Effect of magnetic hysteresis on rotational losses in heteropolar magnetic bearings

This paper extends a method for predicting rotational losses for laminated rotors of heteropolar magnetic bearings by using an eddy-current model to include the effect of magnetic hysteresis in the rotor material. It compares the modeling results to the experimental data that were used earlier to assess the loss model neglecting hysteresis. The correction to the total electromagnetic loss in the rotor due to the hysteresis is significant at rotational speeds below 6000 revolutions per minute (RPM), where the model including hysteresis effects provides much better agreement with existing experimental data.     

Properties of fine-grained graphites based on two-component fillers

The effect of the nature of two-component fillers on the physical and mechanical properties of finegrained graphites was studied using highly oriented needle coke and nearly isotropic synthetic graphite as components of fillers. Each filler was prepared in the form of coarse (-120 µm) and fine (-10 µm) powders. Different mixtures of these components were used in producing graphite samples, which were then characterized by density, thermal expansion, compressive strength, and modulus of elasticity measurements. The results demonstrate that the thermal expansion, compressive strength, and modulus of elasticity of the graphites thus prepared depend on the microtexture, size, and shape of the filler particles.Translated from Neorganicheskie Materialy, Vol. 40, No. 12, 2004, pp. 1448–1454.Original Russian Text Copyright © 2004 by Samoilov.     

Thermal Transformations of an Aluminoborophosphate Binder

Thermal transformations of a commercial aluminoborophosphate binder are studied in a broad temperature range by optical microscopy, x-ray diffraction, IR spectroscopy, and thermal analysis. The introduction of B₂O₃ reduces the temperature of phosphate polycondensation, enhances the stability of cyclometaphosphates in a broad temperature range (180–1100°C), and reduces the stability of hydrogen phosphates.     

Composition, Structure, and Thermal Expansion of Ca3Fe4S3O6 and CaFeSO

The iron calcium oxysulfides Ca₃Fe₄S₃O₆ and CaFeSO are synthesized by reacting mixtures of CaO and FeS in an inert atmosphere. Their elemental compositions and lattice parameters are determined by x-ray microanalysis and x-ray diffraction. From the temperature-dependent lattice parameters of the oxysulfides (measured up to 1020 K), their thermal expansion coefficients are evaluated.     

Synthesis and Study of Ion Adsorption and Fluorescent Properties of Silica-Grafted Bis(crownazo)methine

A ketocyanine ligand containing two N-aza-15-crown-5 residues has been synthesized and covalently anchored to a silica substrate through an azomethine link. The ligand formation and molecular structure have been determined by combining spectral data and molecular simulations. Preferential adsorption of rare-earth metals from aqueous solutions to the modified surface has been noticed. In the case of lanthanum, the adsorption is accompanied by significant fluorescence enhancement, which allows this system to be used as a sensor for La³⁺ ion.     

Synthesis and Composition of Compounds Containing the B10H- 11 Anion

The compounds MB₁₀H₁₁ (M = Me₄N⁺, Et₄N⁺, Bu₄N⁺, Ph₄P⁺, Ph₄As⁺) are synthesized. A procedure is proposed for boron determination by atomic absorption spectrophotometry, using microwave processing for sample preparation.     

Nonadditivity of Properties and the Possibility of Formation of Ensembles of Incommensurate Structures in the GaSe–Ga2Se3 System

The GaSe–Ga₂Se₃ system is studied by x-ray diffraction, electron microscopy, and differential scanning calorimetry. The results demonstrate that the nonadditivity of heat capacity observed near the eutectic composition after quenching is similar to the nonadditivity of properties in misfit layer compounds, which contain incommensurate structural components. The origin of this similarity is discussed in terms of the self-organization of interacting incommensurate elements in the melt and the formation of unstable suprastructural ensembles.     

Assessing the Efficiency of Chemical and Mineral Admixtures in Early Cement Hydration

A procedure is proposed for evaluating the efficiency of chemical and mineral admixtures in early cement hydration with the use of calorimetric data and with allowance made for the selective effect of admixtures on the hardening process. The concepts of admixture efficiency and admixture–cement compatibility are formulated and are shown to be of practical importance. The proposed approach is substantiated using thermokinetic results on the effects of various admixtures on the hydration of different cements, and the underlying mechanisms are discussed.     

Thomas Fincke und die <Emphasis Type="Italic">Geometria rotundi</Emphasis>

Thomas Fincke (January 6^th, 1561–April 24^th, 1656), born in Flensburg (Germany), was one of the very most important and significant scientists in Denmark during the seventeenth century, a mathematician and astrologer and physician in the beginning of modern science, a representative of humanism and an influentual academic organizer. He studied in Strasbourg (since 1577) and Padua (since 1583) and received his M.D. in Basel (1587), he practised as a physician throughout his life (since 1587 or 1590) and became a professor at Copenhagen (1591). But he was best known because of his Geometriae rotundi libri XIIII (1583), a famous book on plane and spherical trigonometry, based not on Euclid but on Petrus Ramus. In this influentual work, in which Fincke introduced the terms tangent and secant and probable first noticed the Law of Tangents and the so-called Newton-Oppel-Mauduit-Simpson-Mollweide-Gauss-formula, he showed himself to be „abreast of the mathematics of his time“.      

Stability of Circular Cylindrical Shells with a Single Local Dent

The theoretical-and-experimental investigation has been performed on the stability of smooth cylindrical shells of steel with a single local dent. All the shells manufactured using the same process were tested with the fulfillment of identical conditions for observations and measurements. Theoretical calculations were carried out by the mesh method with the use of the nonlinear theory of shells. A comparison of the experimental and theoretical values of the critical loads has been made. The theoretical-and-experimental approach proposed enables one to evaluate the quality of shells by studying local dents and other specific imperfections.