Realization of high pressures and temperatures in the gas phase of a bubble liquid flowing through a nozzle

A steady flow of a bubble gas-liquid mixture in a nozzle having a circular cross section has been investigated. The possibility of realization of superhigh temperatures and pressures in the gas phase of the mixture in the region near the smallest cross section of the nozzle has been analyzed. The influence of the initial radius of the flow and the volume content of bubbles, determining the volumetric rate of flow of the liquid supplied to the nozzle, on the pattern of the flow has been considered. __________ Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 80, No. 6, pp. 134–137, November–December, 2007.     

Measurement of viscoplastic properties of a liquid in experiments with a torsion viscosimeter

The results of a numerical solution of the problem of vibrations of a torsion viscosimeter filled with an incompressible viscoplastic liquid are presented. It has been shown that in the vicinity of the rotation axis there appears a dead zone, whose boundary changes in the process of vibrations. The influence of plastic properties of the liquid on the characteristics of viscosimeter vibrations has been determined. A method for identifying viscoplastic properties by the observed parameters of vibrations is proposed. __________ Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 80, No. 1, pp. 124–127, January–February, 2007.     

Calculation of radiation fluxes to the surface of a space vehicle with the aid of a discrete ordinates method

A method and results of numerical modeling of radiative heating of the back surface of the MSRO (Mars Sample Return Orbiter) space vehicle of the European Space Agency are presented. To determine radiation heat fluxes, the method of discrete ordinates on unstructured tetrahedral grids is used. The radiative model is based on the radiation-transfer equation in a multigroup approximation. Numerical calculation has been performed for the most thermally stressed point of the assumed trajectory of the entry of an MSRO-type space vehicle into the Mars atmosphere. A comparison with the discrete ordinates method on structured grids is made. Good agreement between the results of calculations on structured and unstructured grids is demonstrated. The level of radiation heat fluxes to the back surface of the MSRO space vehicle is predicted. __________ Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 80, No. 2, pp. 71–78, March–April, 2007.     

Mathematical Modeling of Heat and Mass Transfer in Evaporation of a Substance from a Porous Body in Vacuum

A problem of the Stefan type which describes heat and mass transfer in a porous body with the double phase transition liquid–ice–vapor has been formulated and solved.     

Failure Analysis of Fuel System Assemblies

Fuel system assemblies used on recreational watercraft failed after a short time in service in a seawater environment. Examination of the assemblies revealed significant degradation of the polyacetal connectors of the wire subassemblies. Optical and microscopic evaluations indicated the complete loss of connector material implying decomposition of the resin, along with mud-cracking and a rough surface morphology signifying chemical attack. An elemental analysis performed on both an intact connector and degraded connector suggested a potential chemical agent in the form of zinc chloride. At elevated temperatures, concentrated zinc chloride solutions are known to decompose polyacetal resins. The source of the zinc chloride was established as corrosion products that resulted during the dezincification of the internal brass connector through exposure to saltwater in the application.     

AgNO<Subscript>3</Subscript> spray tests: advantages,weaknesses, and various applications to quantify chloride ingress into concrete. Part 1: Non-steady-state diffusion tests and exposure to natural conditions

Within the framework of the evaluation and the prediction of chloride-induced corrosion risks, simple and rapid AgNO₃ spray tests can be proposed for various issues. This paper forms the first part of a series. In this first part, the Maultzsch procedure (spraying of 0.1-N AgNO₃ solution + K₂CrO₄) as well as the procedure based on the use of a sole AgNO₃ solution have been investigated on a broad range of concretes. These procedures have also been compared to the Collepardi procedure (spraying of 0.1-N AgNO₃ + fluoresceine). The feasibility of these colorimetric techniques on saturated specimens cast in laboratory, after non-steady-state diffusion tests carried out in various conditions, is discussed. In addition, the results obtained from applying such spray tests in field conditions on cores drilled out from various RC test specimens exposed to a marine environment (tidal zone) and to a road and cold environment (freezing-thawing cycles and spraying of deicing salts) are presented. Colorimetric methods have in particular been applied here to the assessment of the average chloride penetration depth and of its evolution versus time (kinetics). Moreover, the detection threshold of these techniques has been investigated in various environments. The possible sources of discrepancy on the results have been analysed.     

A novel technique to prepare LiNbO3 at low temperature

Fresh niobium hydroxide was first precipitated from NbF₅ solution using an aqueous ammonium hydroxide under basic conditions. Then a simple procedure of mixing lithium and niobium hydroxides together and heating at a low temperature (400 °C) produced pure ultrafine single phase LiNbO₃ (LN). In the literature, this is the lowest temperature so far reported on the formation of LN. The phase content and lattice parameters are determined by X-ray diffraction (XRD). The average particle size and morphology were studied by transmission electron microscopy (TEM).     

Research and Design of Network Management Construction Based on Mobile AGENT

The technical characters of mobile agent （MA） originated in the distributional artificial intelligence domain is introduced. A network management construction based on agent （NMCA） is then proposed. The NMCA structure features are elaborated in detail. A prototype design of NMCA is given by using the jKQML programming. The establishment of NMCA platform will be helpful to reduce the correspondence load of network management and improves the efficiency and the expansion ability of network management systems.     

A novel fuzzy clustering algorithm for the analysis of axillary lymph node tissue sections

Recently Fourier Transform Infrared (FTIR) spectroscopic imaging has been used as a tool to detect the changes in cellular composition that may reflect the onset of a disease. This approach has been investigated as a mean of monitoring the change of the biochemical composition of cells and providing a diagnostic tool for various human cancers and other diseases. The discrimination between different types of tissue based upon spectroscopic data is often achieved using various multivariate clustering techniques. However, the number of clusters is a common unknown feature for the clustering methods, such as hierarchical cluster analysis, k-means and fuzzy c-means. In this study, we apply a FCM based clustering algorithm to obtain the best number of clusters as given by the minimum validity index value. This often results in an excessive number of clusters being created due to the complexity of this biochemical system. A novel method to automatically merge clusters was developed to try to address this problem. Three lymph node tissue sections were examined to evaluate our new method. These results showed that this approach can merge the clusters which have similar biochemistry. Consequently, the overall algorithm automatically identifies clusters that accurately match the main tissue types that are independently determined by the clinician.