A theoretical and experimental study of low-loss SAW filters with interdigitated interdigital transducers

A study of low-loss surface-acoustic-wave (SAW) interdigitated interdigital transducer (IIDT) structures is presented. A model based on mixed scattering matrices was used in the analysis. It is shown that the inherent comb frequency response of the IIDT can be smoothed by slanting the transducers in the structure. Alternatively, the combs can be enhanced to produce a compact low-loss feedback element for potential application in multimode oscillators. Experimental verification of the analysis is provided by a 3:2 slanted-finger IIDT filter with a 10% relative bandwidth of 5.9-dB insertion loss, and a comb filter with 13.4-dB insertion loss and comb spacing of about 3 MHz. The measured responses agree quite well with the theory.     

Injection locking techniques for a 1-GHz digital receiver using acoustic-wave devices

The use of surface-transverse-wave (STW) resonator-based oscillators as amplifiers and as carrier recovery elements is discussed. It is demonstrated that these oscillators can amplify phase-shift-keyed signals with very little added noise, while providing a constant output power. Their performance in carrier recovery amplifications is analyzed. Experimental results showing the amplification with more than 80 dB of dynamic range of a 2 Mb/s BPSK signal and the carrier recovery of an 8 Mb/s signal with a 1-GHz STW oscillator are shown.     

Aspects of modeling the frequency response of a two-port waveguide-coupled SAW resonator-filter

Coupling-of-modes-in-time and coupling-of-modes-in-space analyses are applied to the modeling of a two-port two-pole waveguide-coupled SAW resonator filter. Modeling is applied to a lumped equivalent circuit and a distributed circuit. While the accuracy of the coupling estimation dictates the exact mode-splitting and bandwidth, the ensuing computations can give a good representation of the amplitude and phase response, including the effect of degenerate transverse modes.     

Citations do not solve problems.

D. T. Cambell and D. W. Fiske (1959) made the now-obvious statement that measures of the same variable made by different methods should agree (converge) and certainly should agree better than measures of different variables made by those several methods. Almost everyone accepted that statement, yet the multitrait–multimethod matrices published today show little or no improvement over the published examples cited in 1959. The article raised the conceptual problem of how a variable and its measurement should be linked and the methodological problem of clarifying the nature of methods and their effects. Given these unresolved problems, it is perhaps not surprising that the question of the appropriate statistical analysis of these matrices has also no consensual answer. Perhaps methods and traits or contents are so thoroughly intertwined that their interaction cannot be adequately analyzed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

High-Carbon Steels from Pueblo’s Basic Oxygen Plant

A large percentage of the steel produced at CF&I’s basic oxygen facility is high-carbon grade. The operating practice at the Pueblo, Colo., plant is described including such variables as lance positions, blowing rates, and flux additions. Operating problems such as dust collection and lining life are also discussed in detail.     

THE IRREVERSIBLE ADSORPTION OF PLUTONIUM HEXAFLUORIDE†

The room temperature adsorption of PuF_6(g) on a solid substrate was compared to the adsorption of UF6(g) on the same surface. Significantly more PuF_6(g) was adsorbed at pressures in the range of 1.2 to 0.2torr, accompanied by the evolution of molecular fluorine. The adsorbed UF₆ was easily desorbed by reducing the pressure. Most of the adsorbed PuF₆ remained on the surface when subjected to the same treatment.     

Obesity in children – facts and fallacies

Obesity is now recognised as the most prevalent nutritional disorder affecting children. Prevalence rates across Europe have increased sharply in the past decade and the consequences of this are increasingly clear with type 2 diabetes, hyperlipidaemia and hypertension now affecting children in growing numbers. The causes of this modern epidemic are many and involve complex genetic and environmental factors and the traditional view of obesity as a product of laziness and greed is increasingly being challenged. Whatever the causes, prevention and treatment need to be considered with urgency. While personal and parental responsibility remain crucial, it also falls to government to help control powerful environmental pressures which are leading our children into premature ill‐health and mortality. Equally health professionals are increasingly recognising that they have a significant role to play in delivering medical treatment of obesity in children. Successful treatment requires a greater understanding of obesity, causes, and consequences, and of the particular style of approach that is required for children, and their families. The role of weight loss medication remains unclear, but is being examined seriously, such is the need for effective treatment strategies to minimise the incidence and severity of co‐morbid disease. Inaction at any level can no longer be considered a viable option.     

The heterogeneous nucleation of microcellular foams assisted by the survival of microvoids in polymers containing low glass transition particles. Part I: Mathematical modeling and numerical simulation

The existing models based on classical nucleation theory are not able to explain satisfactorily the nucleation phenomenon of microcellular foams in thermoplastics. Here, we extend the analysis of Kweeder (24), who developed a new model that considers the presence of microvoids, resulting from the thermal processing history of the polymer, as potential nucleation sites. The nucleation model “concentrates” on the stresses and thus void formations in the rubber particles. Since these are pre-existing microvoids, bubble nucleation depends on the survival of these voids to grow rather than the formation of a new phase as modeled by classical nucleation theory. The population of viable microvoids with a sufficiently large radius to survive and overcome surface and elastic forces has been modeled to yield the cell density. A log-normal distribution, which relates to the rubber particle size, has been used to model the distribution of microvoids in the polymer composite material. The model depends on various process parameters such as saturation pressure, foaming temperature, concentration of nucleating agents, solubility of the blowing agent in the polymer, and the modulus. High impact polystyrene (HIPS) was added to polystyrene to obtain polymers with different concentrations of rubber gel particles, the nucleating agent, and used here for this study.     

The prediction of transport parameters in filamentous fermentation broths based on results obtained in pseudoplastic polymer solutions

Transport phenomena studies on single phase “model” fluids are of limited value in biochemical engineering if they cannot be translated to the heterogeneous systems encountered in real fermentation processes. In this paper we discuss the utility of polymer solutions as models of filamentous fermentation broths for evaluation of: pipeline friction factors and impeller power numbers (turbine and helical ribbon). To a first approximation, polymer solutions can serve as suitable models for the prediction of laminar flow pressure drop in pipelines and turbulent power consumption in stirred tanks. However, results obtained on polymer solutions do not directly apply to filamentous fermentation broths for predictions of laminar flow impeller power consumption and the transition point for turbulent flow in stirred tanks. These discrepancies are believed to result from the existence of a time dependent yield stress in filamentous fermentation broths.