A facile synthesis of PLGA encapsulated cerium oxide nanoparticles: release kinetics and biological activity

In the present article a facile synthesis of cerium oxide nanoparticles (CNPs) encapsulated in PLGA microparticles is reported. The release kinetics of the CNPs from the PLGA matrix was investigated under acidic, basic and near-neutral pH. A diffusion model was applied to determine the diffusivity of the CNPs from the PLGA matrix. The morphology of the degraded PLGA particles was characterized by high resolution SEM. Superoxide dismutase (SOD) mimetic activity was retained in released CNPs for a longer period of time (～90 days) under different pH. PLGA encapsulated CNP showed excellent biocompatibility. This study demonstrates a potential strategy to deliver CNPs using biodegradable PLGA that ensures a slow release of the CNPs over a long period of time. Thus, the synthesized PLGA encapsulated CNPs could find potential applications in tissue engineering like bone remodelling and regeneration, and protection from disorders caused by neurodegeneration.     

Microstructure and physicomechanical properties of pressureless sintered multiwalled carbon nanotube/alumina nanocomposites

Multiwalled carbon nanotube (MWCNT)/alumina (Al₂O₃) nanocomposites containing CNT from 0.15 vol.% to 2.4 vol.% have been successfully fabricated by simple wet mixing of as-received commercial precursors followed by pressureless sintering. Extent of densification of nanocomposites sintered at low temperature (e.g. 1500 °C) was <90%, but increased up to ∼99% when sintered at 1700 °C and offered superior performance compared to pure Al₂O₃. Nanocomposites containing 0.3 vol.% MWCNT and sintered at 1700 °C for 2 h in Argon led to ∼23% and ∼34% improvement in hardness and fracture toughness, respectively, than monolithic Al₂O₃. In addition, the highest improvement (∼20%) in bending strength was obtained for 0.15 vol.% MWCNT/Al₂O₃ nanocomposite compared to pure Al₂O₃. Weibull analysis indicated reliability of nanocomposites increased up to 0.3 vol.% MWCNT, whereas, beyond that loading consistency was the same as obtained for pure Al₂O₃. Detailed microstructure and fractographic analysis were performed to assess structure-property relationship of present nanocomposites.     

Epoxidized Mesua ferrea L. seed oil‐plasticized thermostable PVC and PVC‐clay nanocomposites

The use of vegetable‐oil‐based polymeric plasticizers with nanotechnology can create new applications for plasticized poly(vinyl chloride) (PVC). Epoxidized Mesua ferrea L. (Ceylon Ironwood) seed oil was used as a plasticizer for PVC. Further, nanocomposites were prepared through an ex‐situ technique using epoxidized‐oil‐swelled organically modified montmorillonite (5 wt%) and PVC. Notable improvement in thermal and processing characteristics of the nanocomposites was observed over those of the virgin polymer (in both unplasticized and plasticized PVC), as studied by TGA. The prepared nanocomposites were characterized by FTIR, SEM, TEM, and XRD techniques. A dramatic decrease in viscosity (7‐fold) was observed in THF for a 10% solution of epoxidized‐oil‐modified PVC compared to unplasticized PVC in THF, as measured by Brookfield viscometer. Isothermal analysis at three different temperatures (100, 150, and 200°C) reveals sufficient stability of the epoxidized oil modified PVC nanocomposites, as confirmed by gravimetric and FTIR analysis. Augmentation of thermostability and good retention of mechanical properties of the (Mesua ferrea L.)‐plasticized‐PVC/clay nanocomposites with respect to rigid PVC vouch for the utility of the former as advanced industrial materials. J. VINYL ADDIT. TECHNOL., 18:168–177, 2012. © 2012 Society of Plastics Engineers     

Species dependent aqueous biphasic extraction of some heavy metals

A clean liquid–liquid extraction system was designed for extraction of three different heavy metals (Hg²⁺, Pb²⁺ and Bi³⁺) using an Aqueous Biphasic System consisting of a nonionic surfactant Triton X-100 in combination with two different salts viz., magnesium sulphate and sodium citrate. The extraction was monitored in two ways, by direct partitioning as well as by forming a complex with diphenylthiocarbazone (dithizone) for each metal ion in the Triton phase and measuring the colour intensity using a spectrophotometer. The change in extraction pattern at different pH of the salt rich phase was monitored. The possible change in speciation of these metal ions with pH was checked with the software programme ‘CHEAQS’ (Chemical Equilibria in Aquatic Systems). These heavy metals were also found to have higher extraction in the Triton phase when a prior complexation with dithizone was performed. The method may find extensive applications for the removal and decontaminations of the above mentioned toxic heavy metals from a sample.     

Antioxidant capacities and total polyphenol contents of hydro-ethanolic extract of phytococktail from trans-Himalaya

The aim of this study was to evaluate the in vitro antioxidant potential of hydro-ethanolic extract of a novel phytococktail comprising of sea buckthorn, apricot, and Rhodiola (SAR) from trans-Himalaya. The 1,1-diphenyl-2-picrylhydrazyl (DPPH) activity of the extract increased in a dose-dependent manner (upto 0.1 mg/mL), and was found to be about 38% of that of ascorbic acid at 0.1 mg/mL. The hydro-ethanolic extract of SAR also scavenged the ABTS(.+) radical generated by ABTS/potassium persulfate (PPS) system and was found to be about 62% of that of ascorbic acid at 0.1 mg/ mL. The total antioxidant power of the extract was determined by ferric reducing antioxidant power (FRAP) assay. Total phenolic content was found to be 1.28016 × 10(-3) mol gallic acid equivalent (GAE)/g extract. Total flavonoid and flavonol contents were estimated to be 2.5970 × 10(-4) mol and 4.87 × 10(-4) mol quercetin equivalent/g extract, respectively. The hydro-ethanolic extract of this phytococktail indicated presence of essential phytoconstituents of polyphenols, flavonoids, flavonols, and ascorbic acid, which contributed significantly to its antioxidant capacity. The combination of the 3 plants may well support their use in traditional medicine to combat oxidative stress and high-altitude sickness.     

Polymer-stabilized graphene dispersions at high concentrations in organic solvents for composite production

We demonstrate a simple and effective technique for dispersing pristine (unfunctionalized) graphene at high concentrations in a wide range of organic solvents by use of a stabilizing polymer (polyvinylpyrrolidone, PVP). These polymer-stabilized graphene dispersions are shown to be highly stable and readily redispersible even after freeze-drying. This technique yields significantly higher graphene concentrations compared to prior studies. An excellent increase in the thermal conductivity of the fluid by the addition of pristine graphene is also demonstrated. These well-dispersed pristine graphene sheets were then used as a strong and conductive nano-filler for polymer composites. Graphene/PVP composites were produced by the bulk polymerization of N-vinylpyrrolidone loaded with dispersed graphene, resulting in excellent load transfer and improved mechanical and electrical properties.     

Evaluation of post-fault restoration strategies in multi-domain networks

Although multi-domain survivability is a major concern for operators, few studies have considered the design of post-fault restoration schemes. This paper proposes two such strategies, based upon hierarchical routing and signaling crankback, to handle single and multi-link failure events in multi-domain IP/MPLS networks (also extendible to optical DWDM networks). Specifically, the hierarchical routing strategy relies upon abstracted domain information to compute inter-domain loose routes, whereas the crankback scheme applies signaling re-tries to restore paths in a domain-by-domain manner. The performance of these proposed solutions is then analyzed and compared via simulation.     

Flexible hybrid WDM/TDM PON architectures using wavelength selective switches

For building an optical access network, we propose some new hybrid WDM/TDM passive optical network (PON) architectures that use wavelength selective switches (WSSs) at the remote node to improve flexibility, data security and power budget. Through simulations we demonstrate that the switching capabilities of a WSS can provide additional gains in terms of wavelength usage by a better statistical multiplexing. Several WSS-based hybrid WDM/TDM PON variants are proposed and assessed. These architectures are also compared with the more commonly used hybrid WDM/TDM PONs consisting of power splitters and/or arrayed wavelength gratings (AWGs), in terms of cost and power budget.     

Characterizing nutrient dynamics with relation to changes in partial pressure of CO2 in a tropical sewage‐fed aquaculture pond situated in a Ramsar wetland

The changes in nutrient dynamics (nitrate, ammonium, silicate, phosphate and iron concentration) vis‐à‐vis partial pressure of CO₂ in water [pCO₂(water)] from tropical sewage‐fed aquaculture ponds (East Kolkota Wetlands, India) were analysed by means of a microcosm. A significant relationship between these nutrient’s removal from the system and reduction in pCO₂(water) was observed (with few exceptions). These water bodies acted as significant sources of CO₂ in pre‐monsoon and monsoon seasons despite having substantial quantity of chlorophyll‐a to make it a net autotrophic system. The study revealed that if conditions favourable for optimum photosynthesis can be maintained in these ponds, the CO₂ source character of these ponds can be reversed. In the post‐monsoon season, when the pH of the water column was high, the system acted as sink for CO₂ which suggests the use of lime to prevent these systems from becoming hypereutrophic and carbon source at the same time.     

Sensory evaluation of black pigmented rice (Oryza sativa cv. Poireton) wine fortified with probiotic Lactobacillus acidophilus ATCC 4356 and Lactobacillus sakei ATCC 15521 using fuzzy logic

Rice wine was prepared in the laboratory from a black pigmented rice (cv. Poireton) using standardized methodology. The wine was fortified with the probiotic strains Lactobacillus acidophilus ATCC 4356 and Lactobacillus sakei ATCC 15521 and allowed to undergo a storage period of 28 days at 4°C. These rice wines were compared with a commercial wine used as a standard reference wine. A panel consisting of 30 judges performed the sensory evaluation. The scores obtained were based on the quality attributes of colour, taste, aroma and alcoholic strength. Analysis of the sensory scores and ranking of the different samples were performed using fuzzy analysis. The quality attributes were also ranked according to their importance in the overall acceptability. Colour and alcoholic strength were accorded the highest importance, compared with aroma and taste, as quality attributes. The rice wines were rated as ‘not satisfactory’, ‘fair’, ‘medium’, ‘good’ and ‘excellent’ on the sensory scale. Out of the wines prepared, black pigmented rice wine fortified with L. acidophilus was the most acceptable and was ranked as ‘good’, which was also at par with the commercial wine. On the other hand, black pigmented rice wine fortified with L. sakei and black pigmented rice wine fortified with L. acidophilus and L. sakei were ranked in the ‘satisfactory’ category followed by the unfortified wine ranked in the ‘fair’ category. Copyright © 2015 The Institute of Brewing & Distilling