Effect of type of processing on the microstructural features and mechanical properties of Al-Cu/SiC metal matrix composites

In this study, an aluminum based metallic matrix (Al-2wt.% Cu) was reinforced with SiC particulates using a conventional casting technique and a new disintegrated melt deposition technique. Microstructural characterization studies conducted on the samples taken from disintegrated melt deposition technique revealed a more uniform distribution of SiC particulates and good interfacial integrity between SiC particulates and metallic matrix when compared to the conventionally cast composite samples. Results of ambient temperature mechanical tests demonstrate an increase in 0.2% YS and ultimate tensile strength of samples taken from disintegrated melt deposition technique when compared with the unreinforced and conventionally cast composite samples. The results of microstructural characterization and mechanical testing were finally rationalized in terms of the nature of processing technique employed to reinforce Al-2wt.% Cu metallic matrix with SiC particulates.     

Ionic conductivity in poly(vinyl butyral) based polymeric electrolytes: Effect of solvents and salts

Li⁺ conductive solid polymeric electrolytes (SPEs) have been prepared by complexing Li salts LiX (X = I, SCN, CLO4, CF3SO3) with poly(vinyl butyral) (PVB) an amorphous polymer with a low T_g value and well known for its outstanding laminating properties. These self-supporting SPEs have been prepared by the solution cast technique using cyclohexanone, tetrahydrofuran, and n-butyl alcohol as solvents. The XRD and DSC investigations correlated to measured ionic conductivities have revealed that in addition to the amorphous nature of the resulting complex, its T_g value, the concentration and the values of the lattice energies of the complexing salts, the solvent used in making the SPEs also govern the value of ionic conductivity. Highest ionic conductivity values attained in SPEs made with n-butyl alcohol are explained in terms of the interception of the hydrogen bonding due to solvation.     

Quantitation of Cefaclor in Pharmaceutical Dosage Forms Using High Performance Liquid Chromatography

A stability-indicating high-performance liquid chromatography for the quantitation of cefaclor in pharmaceutical dosage forms has been developed. The method is accurate and precise with a percent relative standard deviation of 1.2 based on 5 readings. A number of inactive ingredients present in the capsules and suspensions did not interfere with the assay procedure. The extraction procedure from the dosage forms is very simple. The recovery from the synthetic mixtures was quantitative. The capsules which had expired 3 years ago lost only 3% of the potency. The drug appears to be very sensitive to strong acids or bases since a 5 minute boiling caused 100% degradation of drug in both the solutions.     

Radiation-Induced graft copolymerization of methacrylic acid onto polypropylene fibers. V. Mechanical properties

Mechanical properties of polypropylene-g-poly(methacrylic acid) fibers, prepared by graft copolymerization of methacrylic acid onto polypropylene fiber using simultaneous gamma ray irradiation technique, were evaluated. In general, an improvement in the mechanical behavior of the polypropylene fiber by grafting was observed. Denier and initial modulus of the fiber showed a linear increase with the percent graft, and elongation showed an opposite trend. The results have been explained in terms of reinforcing effect of poly(methacrylic acid) grafts and reduction in the segmental mobility of the polymeric chains. Tenacity also increases up to certain graft level, beyond which a sharp decrease occurs, probably due to the influence on the compactness of the macromolecular chains with the further grafting.     

Microstructural Investigation on Failure of Internal Drive Shaft

17-4 PH stainless steel is used as internal drive shaft material in liquid engine pumps. One of the drive shafts failed during operation. The shaft pieces were in contact for short duration after failure, which has resulted in abrasion of fractured surfaces. Samples from the location of failure were taken, and investigation of the failure was carried out using optical and scanning electron microscopy. The microstructural analysis of the material and fractographic analysis of the fractured surface show that the failure was caused by excessive torsion.     

High-rate vector quantization for detection

We investigate high-rate quantization for various detection and reconstruction loss criteria. A new distortion measure is introduced which accounts for global loss in best attainable binary hypothesis testing performance. The distortion criterion is related to the area under the receiver-operating-characteristic (ROC) curve. Specifically, motivated by Sanov's theorem, we define a performance curve as the trajectory of the pair of optimal asymptotic Type I and Type II error rates of the most powerful Neyman-Pearson test of the hypotheses. The distortion measure is then defined as the difference between the area-under-the-curve (AUC) of the optimal pre-encoded hypothesis test and the AUC of the optimal post-encoded hypothesis test. As compared to many previously introduced distortion measures for decision making, this distortion measure has the advantage of being independent of any detection thresholds or priors on the hypotheses, which are generally difficult to specify in the code design process. A high-resolution Zador-Gersho type of analysis is applied to characterize the point density and the inertial profile associated with the optimal high-rate vector quantizer. The analysis applies to a restricted class of high-rate quantizers that have bounded cells with vanishing volumes. The optimal point density is used to specify a Lloyd-type algorithm which allocates its finest resolution to regions where the gradient of the pre-encoded likelihood ratio has greatest magnitude.     

Power gain in feedback amplifiers, a classic revisited

A tutorial review of a classic paper by Samuel J. Mason (1954) is described. That paper contained the first definition of a unilateral power gain for a linear two-port and the first proof that this grain is invariant with respect to linear lossless reciprocal four-port embeddings, thereby making it useful as a figure of merit intrinsic to the device. In this work, that original paper is brought up to date, a tutorial exposition of its contents is presented in a modern form, and its significance and applications in microwave engineering are discussed. The subsequent advances in the subject area are summarized, so that the original paper can be placed within a broader context and understood with a more general perspective     

Human papillomavirus investigation of patients with cervical intraepithelial neoplasia 3, some of whom progressed to invasive cancer

Unstable expansion of the CTG repeats in the 3' untranslated region encoding a member of the protein kinase family in the q13.3 band on chromosome 19 is a mutation specific for myotonic dystrophy. To examine the correlation between clinical expression and CTG trinucleotide repeat length, we carried out Southern blot analysis in a family with myotonic dystrophy. In this pedigree, the expanded CTG repeats were transmitted maternally. The mother had three female children. The mother had about 200 CTG repeats, and the number of repeats for each child was about 800, 1500 and 1600 in birth order. The mother and the patient with 800 repeats were unaware of muscle weakness or myotonia. Symptoms were present from age 3 years in the patient with 1500 repeats and from birth in the one with 1600 repeats. Although the mother menstruated regularly, the patients with 800 and 1500 repeats both menstruated irregularly, and the one with 1600 repeats has never menstruated. The age of onset and severity of the disease were correlated with the size of the expanded repeats. Endocrinological studies revealed that the basal levels of the gonadotropins, PRL and E2 were within normal range, and a pituitary response to LHRH was observed. These data suggest that the amenorrhea and menstrual irregularities were caused by a suprahypophyseal dysfunction. When expanded CTG repeats are transmitted maternally, abnormal products resulting from the metabolic disturbance in the affected mother may harm the fetus in utero. A heterozygous fetus, who has more CTG repeats, may be unable to metabolize the pathologic products sufficiently and therefore may become more severely affected. This may explain the exclusive maternal transmission of congenital myotonic dystrophy.