Method of differential prognostication of pertussis morbidity

The authors present a method of differential prognostication of pertussis morbidity permitting to consider in prognostication the tendencies of individual subsets of the dynamic series which could be conditioned by individual causes. The general picture of the phenomenon to be prognosticated is obtained by superimposition of the values prognosticated by each of the segregated subsets.     

Three-dimensional facial morphometry and conventional cephalometrics: a correlation study

Analysis of genomic sequences is necessarily an ongoing process. Initial gene assignments tend (wisely) to be on the conservative side (Venter, 1996). The analysis of the genome then grows in an iterative fashion as additional data and more sophisticated algorithms are brought to bear on the data. The present report is an emendation of the original gene list of Methanococcus jannaschii (Bult et al., 1996). By using a somewhat more updated database and more relaxed (and operator-intensive) pattern matching methods, we were able to add significantly to, and in a few cases amend, the gene identification table originally published by Bult et al. (1996).     

Grafting of 2-(dimethlamino) ethyl methacrylate onto gamma irradiated polypropylene fabric

Polypropylene fabric was gamma pre-irradiated at doses of 1,2 and 3 Mrads. The irradiated fabric was grafted with an aqueous solution of 2-(dimethylamino) ethyl methacrylate. The graft yield was studied as a function of the different variable conditions such as storage time, monomer concentration (10–40%), reaction time, and temperature (50, 70, 100°C). The grafted polypropylene was further quaternized with dimethyl sulphate or monochloroacetic acid. The grafted and quarternized fabrics were dyed with an acid dye. The fixation properties of the dyed samples were determined by DMF extraction. The moisture regain and mechanical properties were also measured.     

Stability and improvement of health after nursing home admission

This prospective study investigated stability of residents' mental status, function (activities of daily living), and mood during the first and second week following nursing home admission. New residents (N = 647) in eight urban nursing homes were assessed three times. Mental status was measured using the Short Portable Mental Status Questionnaire, function was measured using Scaled Outcome Criteria, and mood was measured using the Mood Adjective Checklist. A repeated measures multivariate analysis of variance, controlling for admission from hospital and readmission to the nursing home, documented stable mental status during the first and second week of nursing home residence. Hygiene, grooming, dressing, and transferring improved, whereas feeding, ambulation, urination, and defecation were stable. Tired and depressed mood adjectives improved, and angry, cheerful, afraid, lonely, and alert mood adjectives were stable. Residents admitted from a hospital had lower mental status and function scores, and readmitted residents had lower urination scores.     

Compatibilization of low‐density polyethylene/plasticized starch blends by reactive compounds and electron beam irradiation

Blends based on various compositions of low‐density polyethylene (LDPE) and plasticized starch (PLST) were prepared by melt extrusion and molding in the form of sheets under hot press. The rheology properties during mixing were studied in terms of torque and temperature against mixing time. The structural properties of LDPE/PLST blends before and after electron beam irradiation was characterized by IR spectroscopy, tensile mechanical testing, and scanning electron microscopy (SEM). The torque‐time curves during the mixing process showed that the values of torque in the first region of mixing for pure LDPE or LDPE/PLST blends are higher in the presence of the compatibilizer PEMA than that in the presence of EVA. In addition, the stability of mixing was attained after a short time in the presence of PEMA. The IR spectroscopy suggests that the compatibilization by EVA and PEMA compounds proceeds through the formation of hydrogen bonding during mixing and this compatibility was improved after electron beam irradiation. The stress–strain curves of pure LDPE and its blends with PLST showed the behavior of tough polymers with yielding properties. The SEM micrographs of the fracture surfaces give supports to the effect of EVA and PEMA as compatibilizers and the effect of electron beam irradiation. POLYM. COMPOS., 2008. © 2008 Society of Plastics Engineers     

Mechanical properties of gamma‐irradiated styrene‐butadiene rubber/acid‐treated vermiculite clay/maleic anhydride nanocomposites

Nanoparticle vermiculite (VMT) clay was prepared by treatment with hydrochloric acid. Styrene‐butadiene rubber (SBR) nanocomposites were prepared by mixing different contents (2.5, 5, 7.5, and 10 phr) of untreated (VMT) and acid‐treated (DVMT) vermiculite clay, respectively. In addition, different contents (3, 7, and 10 phr) of maleic anhydride (MA) as compatibilizer were mixed via direct melt compounding in internal mixer. The effect of gamma irradiation, VMT clay, and MA contents on the mechanical properties was studied. The acid‐treated VMT clay was characterized by x‐ray diffraction (XRD), transmission electron microscopy (TEM), and Fourier transform infrared (FT‐IR) spectroscopy. Meanwhile, the SBR/VMT composites, SBR/DVMT, and SBR/DVMT/MA nanocomposites were characterized via crosslinking density and tensile mechanical testing and FT‐IR spectroscopic analysis. The results indicated that good yield of nanoparticle vermiculite was achieved when the acid treatment was carried out for 120 h. In addition, the results showed that the presence of DVMT clay improved the chemical bonding in the SBR nanocomposites and hence their mechanical properties. The highest improvement was obtained when the contents of DVMT clay, MA, and irradiation dose were 10 phr, 3 phr, and 100 kGy, respectively. POLYM. ENG. SCI., 59:355–364, 2019. © 2018 Society of Plastics Engineers     

Measurement of Frequency-Dependent Dynamic Properties of Soils Using the Resonant-Column Device

Dynamic properties of soils are commonly evaluated at resonance; thus, their variation with frequency is difficult to measure. A nonresonance (NR) method has been recently used for testing soils at low frequencies and strain levels below the linear threshold shear strain. However, the NR method has not been validated with the standard resonant method for different shear strain levels. In this study, the NR method is used to measure the dynamic properties of soils at low and midstrain levels for a maximum frequency bandwidth between 5 and 100?Hz using the resonant-column device. A new transfer function (NTF) equation is introduced to compare the dynamic properties measured using the NR method and the conventional transfer function approach. Experimental results for two sands and a sand–bentonite–mud mixture are presented for different strain and stress confinement levels. Results from the NR method compare well with the standard resonant column method at the resonant frequency if the strain levels are the same. The NTF approach can be used to measure the dependence of phase velocity of shear waves with frequency. However, the NTF method cannot be used to measure the variation of material damping with frequency. On the other hand, the NR method can be used to measure the degradation curves of wave velocity and material damping ratio as a function of frequency.     

On the evaluation of wind loads for wind turbines' foundation design: Experimental and numerical investigations

In the past two decades, wind farms have been enjoying renewed interest as means for clean and renewable energy production. Larger and taller wind turbines are used for harvesting wind energy. In this paper, a boundary‐layer wind tunnel experiment was carried out on a model of the 5‐MW National Renewable Energy Laboratory (NREL) wind turbine, to evaluate overall wind‐induced base loadings in a parked condition. While mean and background base loadings were measured experimentally, a posttest dynamic analysis framework is developed to assess inertial loads analytically. The analytical analysis is carried out under both rigid and flexible tower‐foundation assumptions. Whenever applicable, the wind tunnel measurements are compared with NREL results, which were obtained by using the Fatigue, Aerodynamics, Structures, and Turbulence (FAST) software. The comparison shows a good agreement between the proposed approach and the available FAST results. In addition, the study indicates that the flexibility of the foundation may result in a reduced overall wind loads, due to base isolation effects. However, the assumption of a rigid foundation results in a slightly conservative base loads. This said, depending on the available foundation system, the methodology followed in the current paper remains in force and the base stiffness can be updated to permit the estimation of actual foundation loadings.