Stability of a shallow arch under action of deterministic and stochastic load taking into account nonlocalness of elasticity and damping

On the example of a shallow arch, the geometrically nonlinear problem concerned with oscillations of systems excited by a deterministic or stochastic load is considered. The dynamic stability problem is solved for the arch, made from micro- and nanomaterials. The equation, describing the motion of the Euler–Bernoulli arch, is based on the nonlocal elasticity theory and nonlocal damping, taking into account finite deflections. Asymptotic stability and almost sure asymptotic stability criteria involving a damping coefficient, structure and loading parameters are derived using the method of the maximum Liapunov exponent.     

Xenon adsorption on microporous adsorbents at higher pressures

The xenon adsorption isotherms were measured on AUK microporous carbon adsorbent in the range of pressures from 1 Pa to 6 MPa and temperatures of 177.7—393 K. With the adsorption isotherms in the same range of pressures and temperatures, the xenon adsorption isosteres were calculated. The derived curves are well approximated with linear functions. With the adsorption isosteres, differential molar isosteric adsorption heat curves were plotted vs. adsorption and temperature. The obtained results were compared with the reference data of the xenon adsorption on PAU-10 active carbon.     

A fiber-optic unit for measuring absolute distances and displacements with a nanometer resolution

A fiber-optic unit for measuring small absolute distances, namely, the base of the Fabry-Perot interferometer, formed by the fiber end and the reflecting surface from 30 to 250 μm with a resolution of no worse than 50 nm is described. The foundation for operation of the unit is the spectral method of the fiberoptic low-coherence interferometry.     

A method for isolation of sequences missing in one of two related genomes

We describe a novel technique for isolation of sequences that are present in one genome (tracer), but absent in another (driver). Tracer DNA, cleaved with Sau 3A and capped with a single stranded PCR adapter, is allowed to hybridize with an excess of sheared biotinylated driver; biotinylated DNA and its hybrids with the tracer are removed by phenol/chloroform extraction after incubation with streptavidin. After several rounds of subtraction the ends of self-annealed tracer molecules from the nonextractable fraction are filled-in with Tag polymerase and amplified, using the single stranded PCR adapter as a primer. The method has been applied to purification of fragments from a 2.9 kb plasmid added to E. coli DNA at equimolar quantity. Plasmid derived fragments (250-1000 bp), initially comprising 1/1400th part of tracer DNA, were purified to homogeneity after two rounds of subtraction followed by PCR.     

The radiographic and imaging characteristics of porous tantalum implants within the human cervical spine

STUDY DESIGN: Seven cadaveric cervical spines were implanted with a porous tantalum spacer and a titanium alloy spacer, and their radiographic and imaging characteristics were evaluated. OBJECTIVE: To determine the radiographic characteristics of porous tantalum and titanium implants used as spacers in the cervical spine. SUMMARY OF BACKGROUND DATA: Anterior decompressive surgery of the disc space or the vertebral body creates a defect that frequently is repaired with autologous bone grafts to promote spinal fusion. Donor site morbidity, insufficient donor material, and additional surgical time have spurred the development of biomaterials to replace or supplement existing spinal reconstruction techniques. Although the promotion of a solid bony fusion is critical, the implanted biomaterial should be compatible with modern imaging techniques, should allow visualization of the spinal canal and neural foramina, and should permit radiographic assessment of bony ingrowth. METHODS: Cadaveric spines containing the implants were imaged with plain radiography, computerized tomography, and magnetic resonance imaging. The image distortion produced by the implants was determined qualitatively and quantitatively. RESULTS: The tantalum and titanium spacers were opaque on plain radiographic films. On computed tomographic scans, more streak artifact was associated with the tantalum implants than with the titanium. On magnetic resonance imaging, the porous tantalum implant demonstrated less artifact than did the titanium spacer on T1- and T2-weighted spin echo and on T2*-weighted gradient-echo magnetic resonance images. Overall, the tantalum implant produced less artifact on magnetic resonance imaging than did the titanium spacer and therefore allowed for better visualization of the surrounding bony and neural structures. CONCLUSION: The material properties of titanium and porous tantalum cervical interbody implants contribute to their differential appearance in different imaging methods. The titanium implant appears to image best with computed tomography, whereas the porous tantalum implant produces less artifact than does the titanium implant on several magnetic resonance imaging sequences.     

Color-coded measures of myocardial velocity throughout the cardiac cycle by tissue Doppler imaging to quantify regional left ventricular function

TDI is a new echocardiographic technique that calculates and displays color-coded myocardial velocity on-line. To determine the feasibility of endocardial velocity throughout the cardiac cycle as a means to quantify regional function, 20 normal subjects aged 30 +/- 5 years and 12 patients with heart disease aged 62 +/- 17 years were studied with a prototype TDI system. TDI M-mode images were acquired by using a multicolored velocity map (display range, -30 to 30 mm/sec; temporal resolution, 90 Hz). Color-coded velocity data were then converted to numeric values off-line at 50 msec intervals. Posterior wall velocities throughout the cardiac cycle by TDI were closely correlated with velocity calculations from the first derivative of routine digitized M-mode tracings (group mean r = 0.88 +/- 0.03, SEE = 7.0 +/- 1.1 mm/sec). Anteroseptal TDI color-coded systolic velocity occurred 164 +/- 84 msec from the onset of the electrocardiographic QRS compared with 203 +/- 33 msec in the posterior wall (P < 0.05) in normal subjects, consistent with normal electrical activation. Significant differences in systolic and diastolic posterior wall TDI velocity data were observed in patients with hypokinetic or akinetic segments assessed by independent routine study when compared with normal controls. Calculated systolic and early diastolic posterior wall TDI indexes correlated significantly with percentage of wall thickening. Of abnormal anteroseptal segments, TDI systolic time velocity integrals were significantly different than normal and correlated with percentage of wall thickening. TDI has potential to quantitatively assess regional left ventricular function.