THE REACTIVITY AND DURABILITY OF ZINC FERRITE HIGH TEMPERATURE DESULFURIZATION SORBENTS

Cylindrical pellets of zinc ferrite high temperature desulfurization sorbent have been prepared using a number of formulation recipes and induration conditions. Physical and structural properties of the resultant sorbents were measured, and reactivity and durability screening tests were carried out using a single pellet electrobalance reactor. The formulation variables studied were ZnO to Fe₂O₃ ratio, Fe₂O₃ source, and the addition of inorganic (bentonite) and organic (methocel) binders to the sorbents. Pellet induration conditions ranged from 0.25 hours at 815^°C to 4.0 hours at 1038°C. Stronger pellets having greater attrition resistance resulted when 5% bentonite was added to the formulation recipe and when the pellets were indurated at high temperature for extended times. In contrast, bentonite content was not a significant factor in determining sorbent reactivity and durability, both of which were improved by mild induration conditions. Sorbent regeneration temperature was found to be an important factor in improving reaction durability, as was the addition of 0.5% methocel to the formulation recipe. Pellets containing catalyst-grade Fe₂O₃ were more reactive than those containing pigment-grade Fe₂O₃. This effect, however, was less important than the effect of induration conditions.     

Near‐Infrared Light‐Emitting Diodes (LEDs) Based on Poly(phenylene)/Yb‐tris(β‐Diketonate) Complexes

Near‐infrared‐emitting electroluminescent (EL) devices using blue‐light‐emitting polymers blended with the Yb complexes Yb(DBM)₃phen (DBM = dibenzoylmethane), Yb(DNM)₃phen (DNM = dinaphthoylmethane), and Yb(TPP)L(OEt) (L(OEt) = [(C₅H₅)Co{P(O)Et₂}₃]^–) have been studied. EL devices composed of Yb(DNM)₃phen blended with PPP‐OR11 showed enhanced near‐IR output at 977 nm when compared to those fabricated with Yb(DBM)₃phen/PPP‐OR11 blends. The maximum near‐IR external efficiencies of the devices with Yb(DBM)₃phen and Yb(DNM)₃phen are, respectively, 7 × 10^–5 (at 6 V and at 0.81 mA mm^–2) and 4 × 10^–4 (at 7 V, and 0.74 mA mm^–2). The optimal blend composition for EL device performance consisted of PPP‐OR11 blended with 10–20 mol‐% Yb(DNM)₃phen. A device fabricated using Yb‐(TPP)L(OEt)/PPP‐OR11 showed significantly enhanced near‐IR output efficiency, and future efforts will focus on devices fabricated using porphyrin‐based materials.     

A simplified method for modelling the effect of blinds on window thermal performance

An approximate method is presented for predicting the effect of a louvered blind on the centre‐glass thermal performance of a fenestration. The method combines a one‐dimensional heat transfer model with data from a numerical simulation of the window and blind. Sample results for a blind mounted on the indoor surface of a window show the effect of blind slat angle on heat transmission. Both summer and winter conditions are considered. The results show that a louvered blind can improve the U‐value of a standard double‐glazed window by up to 37%. Also, the radiation heat exchange with the room can be dramatically reduced (by up to 60%), which will improve the level of occupant comfort. However, there was found to be a trade‐off between U‐value and occupant comfort; placing the blind closer to the window improves the U‐value, but increases the radiation heat exchange with the room. The predictions from the present simplified method compare well with results from a full two‐dimensional computational fluid dynamics solution of the conjugate blind/window interaction. Copyright © 2005 John Wiley & Sons, Ltd.     

Capacitive transducer for relative position error galvo mirrors

A transducer was designed to sense small angular displacements of servo-controlled galvo mirrors in rotary optical storage devices. The transducer is differential in nature, and operates on the principle of linear electrical capacitance variation with area overlap of uniquely shaped capacitor plates. These capacitive plates lie in planes normal to the axis of rotation, and consist of many electrically connected wedge-shaped projections aligned radially to the center of rotation. A prototype was fabricated and tested. For optical storage devices, experimentally determined characteristic curves show sufficient linearity and repeatability for relative position error (RPE) feedback applications, at plate spacings of 0.15 mm or less. A design change, for further extending the linear range of the characteristic curve of the transducer beyond RPE feedback requirements, is described. A circuit design to produce voltage variations proportional to differential capacitance changes in the transducer is discussed, and peak-to-peak signal-to-noise ratio is conservatively approximated at 2×10⁴ with 10 kHz bandwidth     

Sequence requirements of the Epstein-Barr virus latent origin of DNA replication

The Epstein-Barr virus (EBV) latent origin of DNA replication (oriP) is composed of two elements that contain binding sites for the sole viral gene product required for latent cycle replication, EBNA-1. One of these elements, region I, functions as an EBNA-1-dependent enhancer for RNA polymerase II-transcribed genes, may play a role in plasmid segregation, and is required for origin function in B cells latently infected with EBV. The second element, region II, contains or is very near the site of initiation of DNA replication. A genetic approach was taken to determine the contribution of the EBNA-1 binding sites in oriP to origin function. Although region I is required for the transient replication of plasmids bearing region II in EBV-infected B cells, a plasmid lacking region I but containing region II, was observed to replicate transiently in both D98/Raji and HeLa cells expressing EBNA-1. Thus, binding of EBNA-1 to region I is not absolutely required for the molecular events that lead to initiation of DNA replication at region II. Site-directed mutagenesis of the four EBNA-1-binding sites in region II, individually and in various combinations, demonstrated that only two EBNA-1-binding sites are required for region II function. The results obtained with these mutants, together with the analysis of the replicative ability of plasmids containing insertions between EBNA-1-binding sites, suggested that the spatial relationship of the two sites is critical. Mutants that contain only two EBNA-1-binding sites separated by 26 to 31 bp in region II were not maintained as plasmids over many cell generations and were greatly reduced in their ability to replicate transiently in D98/Raji cells. The EBNA-1-induced bending or untwisting of the DNA in EBNA-1-binding sites 1 and 4 in region II did not, however, demonstrate this spatial constraint. It may be concluded from these results that specific protein-protein interactions between EBNA-1 and/or between EBNA-1 and a cellular protein(s) are required for origin function.     

A technique for developing a master cast with previously made dies

This article describes a technique for preparing final working casts to be used in the laboratory phase of restorative treatment. The goal is to produce accurate working casts that have stable dies which are easily removed from the base and reliably replaced. Most casts with removable dies are made from a single master impression. However, individual dies are sometimes made previously from individual tooth (preparation) impressions. In such cases, transfer copings are required to relate the dies and produce the final working cast. Hollow plastic casting sprues are used as temporary dowels in this technique until a transfer coping pickup impression has been made. After the dies are seated and secured in the transfer coping pickup impression, the plastic casting sprues are replaced with conventional brass dowel pins. This technique ensures well-placed dowel pins that will facilitate easy and accurate withdrawal and replacement of the dies.     

Job demands and worker health: Three-dimensional reexamination of the relationship between person€nvironment fit and strain.

The most influential study of the person–environment (P–E) fit approach to stress was conducted by J. R. French et al (1982). Unfortunately, this study operationalized fit using various transformations of difference scores, thereby introducing numerous substantive and methodological problems. In the present study, the authors reanalyze data from French et al, using a procedure described by J. R. Edwards (in press) that avoids problems with difference scores and captures the underlying 3-dimensional relationship between environment, person, and strain. Results resolve ambiguities in the French et al findings and identify relationships between environment, person, and strain that, although consistent with P–E fit theory, cannot be adequately represented by fit measures such as those used by French et al. Implications for P–E fit research are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Crystal structure of ICAM-2 reveals a distinctive integrin recognition surface

Recognition by integrin proteins on the cell surface regulates the adhesive interactions between cells and their surroundings. The structure of the 'I' domain that is found in some but not all integrins, has been determined. However, the only integrin ligands for which structures are known, namely fibronectin and VCAM-1, are recognized by integrins that lack I domains. The intercellular adhesion molecules ICAM-1, 2 and 3 are, like VCAM-1, members of the immunoglobulin superfamily (IgSF), but they are recognized by an I domain-containing integrin, lymphocyte-function-associated antigen 1 (LFA-1, or CD11a/CD18). Here we present the crystal structure of the extracellular region of ICAM-2. The glutamic acid residue at position 37 is critical for LFA-1 binding and is proposed to coordinate the Mg2+ ion in the I domain; this Glu 37 is surrounded by a relatively flat recognition surface and lies in a beta-strand, whereas the critical aspartic acid residue in VCAM-1 and fibronectin lie in protruding loops. This finding suggests that there are differences in the architecture of recognition sites between integrins that contain or lack I domains. A bend between domains 1 and 2 of ICAM-2 and a tripod-like arrangement of N-linked glycans in the membrane-proximal region of domain 2 may be important for presenting the recognition surface to LFA-1. A model of ICAM-1 based on the ICAM-2 structure provides a framework for understanding its recognition by pathogens.     

Application of degradation kinetics to the rheology of poly(hydroxyalkanoates)

The time‐dependent rheological behavior of a series of 3‐hydroxybuytrate‐based semicrystalline copolymers is employed to determine the expected rheological curves that would be generated in the absence of any polymer degradation. Both dynamic frequency sweep and shear rate sweep experiments were analyzed. A model for the degradation kinetics, coupled with standard rheological relationships, was employed to extrapolate the measured sweeps to predicted curves at time zero, prior to degradation. The model is broadly applicable over a wide range of frequencies or shear rates, and generates a single degradation rate constant k for each polymer studied. A similar, although ad hoc, procedure was applied to the dynamic storage and loss moduli. The model provides a method for determining the rheological behavior of degrading polymers over a time interval, typically found in processing applications. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:1794–1802, 2006