A Study on Microstructural Evolution and Dynamic Recrystallization During Isothermal Deformation of a Ti-Modified Austenitic Stainless Steel

Dynamic recrystallization (DRX) behavior in hot deformed (by uniaxial compression in a thermomechanical simulator in the temperatures range 1173 K to 1373 K [900 °C to 1100 °C]) Ti-modified austenitic stainless steel was studied using electron back scatter diffraction. Grain orientation spread with a “cut off” of 1 deg was a suitable criterion to partition dynamically recrystallized grains from the deformed matrix. The extent of DRX increased with strain and temperature, and a completely DRX microstructure with a fine grain size ~4 μm (considering twins as grain boundaries) was obtained in the sample deformed to a strain of 0.8 at 1373 K (1100 °C). The nucleation of new DRX grains occurred by the bulging of the parent grain boundary. The DRX grains were twinned, and a linear relationship was observed between the area fraction of DRX grains and the number fraction of Σ3 boundaries. The deviation from the ideal misorientation of Σ3 boundaries decreased with an increase in the fraction of Σ3 boundaries (as well as the area fraction of DRX) signifying that most Σ3 boundaries are newly nucleated during DRX. The generation of these Σ3 boundaries could account for the formation of annealing twins during DRX. The role of Σ3 twin boundaries on DRX is discussed.     

Constraint effects on multiple void interaction in pressure sensitive plastic solids

In this work, effects of pressure sensitive yielding and plastic dilatancy on void growth and void interaction mechanisms in fracture specimens displaying high and low constraint levels are investigated. To this end, large deformation finite element simulations are carried out with discrete voids ahead of the notch. It is observed that multiple void interaction mechanism which is favored by high initial porosity is further accelerated by pressure sensitive yielding, but is retarded by loss of constraint. The resistance curves predicted based on a simple void coalescence criterion show enhancement in fracture resistance when constraint level is low and when pressure sensitivity is suppressed.     

Tool selection in three-axis rough machining

An approach to tool selection and sequencing is presented for three-axis rough machining. The trade-off in the selection of tools is as follows: larger tools have reduced access while smaller tools are capable of reduced cutting speed. Furthermore, every tool change incurs a time penalty. The objective of this paper is to select a tool sequence that minimizes the total rough-machining time. In our approach, the removal volume is stratified into 2.5D machining slabs and, for each tool, the area accessible in each slab is computed incrementally, keeping in mind the cutting portion of the tool and the shape of the tool holder and spindle assembly. This reduces the three-axis problem to a series of two-axis problems with complex precedence constraints. Two models are presented to understand this new form of the problem. First, an integer linear programming formulation is discussed to show the complexity of the task. Second, a network flow formulation is presented, by which we show that it is possible to obtain efficiently an approximate solution of the problem. Examples are discussed to illustrate the algorithms discussed.     

Computer viruses

Computer viruses have been around since the mid 1980s. Over 40,000 different viruses have been cataloged so far and the number of viruses is increasing dramatically. The damage they cause is estimated to be several billions of U.S. dollars per year. Most often, the origin of the virus is difficult to trace. Various kinds of anti-virus software have been developed which detect viruses and take corrective actions. The anti-virus software needs to be continually updated to cope with newer types of viruses. The proliferation of the Internet and Web, have enabled viruses to spread quickly on a massive scale, by taking advantage of several security loopholes. The continual challenge is to have quick and effective responses to these virus attacks     

Dietary high protein and vitamin C mitigates endosulfan toxicity in the spotted murrel, Channa punctatus (Bloch, 1793)

The amelioration effect of dietary high protein and vitamin C against stress was evaluated in spotted murrel, Channa punctatus, exposed to endosulfan. Two hundred and forty fish (average weight: 27.01 g/fish), distributed equally into 4 different groups (control, T₁, T₂, and T₃), each with 6 replicates were fed with control (40% crude protein, CP and 0.1% vitamin C), T₁ (40% CP and 0.1% vitamin C), T₂ (50% CP and 0.1% vitamin C), and T₃ (50% CP and 0.2% vitamin C) diets for 90 days. Groups fed T₁, T₂, and T₃ diets were exposed to sublethal endosulfan concentration, whereas the control was maintained without endosulfan exposure. Results indicated significant reduction in the growth performance, survival, and activities of lactate dehydrogenase (liver and muscle), malate dehydrogenase (liver and muscle), enzymes of protein metabolism (aspartate amino transferase in liver and alanine amino transferase in liver and muscle), acetyl choline esterase (brain), alkaline phosphatase activity (liver), and ATPase (gill) enzymes of group fed control diet and exposed to endosulfan. However, endosulfan exposed fish fed high CP and vitamin C diet exhibited significant (P < 0.05) improvement in their growth performance and metabolic enzyme activities. Further, high CP and vitamin C diet reduced endosulfan accumulation in the muscle. Overall results indicate that vitamin C (0.2%) supplementation in high CP (50%) diet improves growth, metabolism, and reduce endosulfan bioaccumulation in C. punctatus.     

Some studies on the warm solid- and hollow-extrusion of sintered powder metallurgical copper preforms

The warm extrusion of sintered P/M preforms of electrolytically pure copper has been investigated for extrusion strains of 0.35, 0.5, 0.66 and 0.81 for the solid configuration and 0.43, 0.62, 0.85 and 1.09 for the tubular configuration at temperatures of 303, 363, 433, 493 and 563 K with densities of 7.45 and 7.90 g cm⁻³ for the solid configuration and 7.0 and 7.7 g cm⁻³ for the tubular configuration. Force requirements and microstructural property evaluation have been attempted. Using the standard axial ring-compression test on the initial preforms, the plastic properties were evaluated to enable the computation of theoretical forces. The actual forces were compared with these theoretical forces and a correction factor, φ, then determined. The influence of strain, temperature and the geometry in ensuring near to theoretical density of the extrudates has been assessed.     

Solubility of Ruthenium Dioxide in Lead Borosilicate Glasses

The solubility of RuO₂ in a lead borosilicate glass was measured in the range of 700° to 1000°C. The effect of dissolved alumina in the glass was studied in the same range using 2%, 4%, 6%, and 10% dissolved alumina. The solubility showed an exponential dependence on temperature, and the dissolved alumina decreased the solubility at any given temperature; however, the solubility was essentially the same in all of the alumina-containing glasses. The Kelvin equation was used to deduce the concentration of RuO₂ in glass as a function of the curvature of the RuO₂ particles, and the dependence was found to be quite small. The implications of the results in processing thick-film resistors using RuO₂ as the conductive phase and these glasses as insulating phases on an alumina substrate are discussed.     

Condensation of vertical plate fins of variable cross section-limiting solutions

The purpose of the present theoretical analysis is to provide explicit solutions for the problem of condensation of vapours on the lateral surface of a long vertical plate fin of variable cross-section. The formulation yields solutions to the Limiting cases so that the results can be employed in the design of the condenser section of a flat plate heat pipe in which the fin is considered to be an essential element in transporting heat liberated by the condensing vapours. It is observed that the local and average Nusselt numbers depend on fin parameter, fin profile index, Rayleigh number and degree of subcooling.