Integrated modelling under uncertainty in watershed-level assessment and management.

Uncertainty in water quality model predictions is inevitably high due to natural stochasticity, model uncertainty, and parameter uncertainty. An integrated modelling system (modified-BASINS) under uncertainty is described and demonstrated for use in receiving-water quality prediction and watershed management. A Monte Carlo simulation was used to investigate the effect of various uncertainty types on output prediction. Without pollution control measures in the watershed, the concentrations of total nitrogen (T-N) and total phosphorus (T-P) in the Hwaong Reservoir, considering three uncertainty types, would be less than about 4.4 and 0.23 mg L(-1), respectively, in 2012, with 90% confidence. The effects of two watershed management practices, wastewater treatment plants (WWTP) and constructed wetlands (WETLAND), were evaluated. The combined scenario (WWTP + WETLAND) was the most effective at improving reservoir water quality, bringing concentrations of T-N and T-P in the Hwaong Reservoir to less than 3.4 and 0.14 mg L(-1), 24 and 41% improvements, respectively, with 90% confidence. Overall, the Monte Carlo simulation in the integrated modelling system was practical for estimating uncertainty and reliable in water quality prediction. The approach described here may allow decisions to be made based on the probability and level of risk, and its application is recommended.     

Investigations of the discharging of metal hydride beds for hydrogen-gasoline mixture operation of SI-engines

A mathematical simulation model is presented describing the discharge process of metal hydrides. The model is applied to FeTi-single tube and multiple tube beds and the results are compared directly to the results of experimental investigations. Furthermore, the most important engine parameters, with respect to the operation with metal hydride stored hydrogen, were determined for the nonsteady FTP 72-driving cycle. Minimum hydride quantities, necessary to supply the engine with hydrogen during the warm-up phase, were calculated for different starting temperatures and initial hydrogen contents of the bed.     

Transient conduction in a slab with chemical reaction

The heat-balance integral technique is used to analyse a one-dimensional transient conduction process. Heat is transferred by convection to the surface of a slab and when the surface temperature reaches a certain value, an endothermic reaction is triggered which propagates as an isothermal front in the same direction as the conduction front. Two possible routes to the fully developed heat transfer condition are treated in a way which allows the approximate temperature distribution in the slab to be predicted as a function of the main process variables.     

Mutagenicity of ambient aerosol collected in an urban and industrial area of The Netherlands

To investigate the influence of the densely populated and heavily industrialized Rijnmond area of The Netherlands on the genotoxicity of the ambient aerosol, aerosol samples were collected at locations within the area, and at a coastal region located upwind. The mutagenicity of extracts of the samples was compared in the Salmonella/microsome test. The dependence of the effects on sampling time and on sampling location was investigated with the aid of a series of simple mathematical models. These models were also used to estimate the increase in mutagenicity above background levels at the sites in the Rijnmond area due to emissions within that area. Application of the models showed that the clear and significant increases are not merely a result of the additions of mutagens emitted, but that possibly interactions between sampling time- and location-dependent factors play a role. Comparison of the results obtained with the different Ames-test variants (different strains, with and without liver homogenate) indicate that the conclusions concerning the time and location dependence of the effect were not dependent on the variant used.     

Sociology of Design and EDA

Walden C. Rhines, CEO and chairman of the board of Mentor Graphics, delivered this keynote address at the Design, Automation, and Test in Europe Conference and Exhibition (DATE 06).     

Enhanced Oil Recovery: The Synthesis of Anthraquinone [1, 2-C] Alkylisoxazole

Anthraquinone [1, 2-C] methylisoxazole is synthesized from 2-ethylanthraquinone through nitration and treating with oleum. The different methods of 2-ethylanthraquinone nitrated were discussed. The optimum conditions were determined. The structure of the product was confirmed by MS and ¹H NMR.     

Equilibrium distribution of water in the two-phase system supercritical carbon dioxide–textile

When natural fibres are dyed in supercritical carbon dioxide, the addition of a small amount of water increases coloration. For a process design it is important to know how much water has to be added to obtain a desired humidity of both textile and carbon dioxide. In this work a thermodynamic model is proposed to calculate the distribution of water over the textile phase and the supercritical phase as a function of pressure and temperature. The phase equilibrium is described with Raoult's law for non-ideal fluids. The absorbed water in the textile is a condensed phase and is modelled here as a non-ideal liquid, using the NRTL-equation. The non-ideality of the supercritical phase is described by a solubility enhancement factor, a new equation derived from statistical thermodynamics. Although the model is applied to cotton, viscose, silk and wool, it can be used for all water absorbing textiles.     

Acoustic emission calibration instrumentation

An automatic calibration instrument was developed to improve the calibration accuracy of acoustic emission (AE) instrumentation. The instrument facilitates calibration by automatically displaying the maximum value of the stress used to produce AE calibration pulses and the AE pulse. A repeatable AE signal was generated by breaking a graphite rod on the test assembly. By measuring the breaking load of the rod and the maximum root-mean-square values of the resulting AE signals, a relative calibration of the AE measurement system was achieved. Low-noise amplifiers and filters were developed to improve the sensitivity of AE measurements by more than one order of magnitude over commercially available instruments; thus, the smaller signals obtained in parts testing can be detected