Removal of As(III) and As(V) from water using a natural Fe and Mn enriched sample

The arsenic removal capacity of a natural oxide sample consisting basically of Mn-minerals (birnessite, cryptomelane, todorokite), and Fe-oxides (goethite, hematite), collected in the Iron Quadrangle mineral province in Minas Gerais, Brazil, has been investigated. As-spiked tap water and an As-rich mining effluent with As-concentrations from 100 μg L⁻¹ to 100 mg L⁻¹ were used for the experiments. Sorbent fractions of different particle sizes (<38 μm to 0.5 mm), including spherical material (diameter 2 mm), have been used. Batch and column experiments (pH values of 3.0, 5.5, and 8.5 for batch, and about pH 7.0 for column) demonstrated the high adsorption capacity of the material, with the sorption of As(III) being higher than that of As(V). At pH 3.0, the maximum uptake for As(V) and for As(III)-treated materials were 8.5 and 14.7 mg g⁻¹, respectively. The Mn-minerals promoted the oxidation of As(III) to As(V), for both sorbed and dissolved As-species. Column experiments with the cFeMn-c sample for an initial As-concentration of 100 μg L⁻¹ demonstrated a very efficient elimination of As(III), since the drinking water limit of 10 μg L⁻¹ was exceeded only after 7400 BV total throughput. The As-release from the loaded samples was below the limit established by the toxicity characteristic leaching procedure, thus making the spent material suitable for discharge in landfill deposits.     

Deteriorating effects of lichen and microbial colonization of carbonate building rocks in the Romanesque churches of Segovia, Spain

In this study, the deterioration effects of lichens and other lithobionts in a temperate mesothermal climate were explored. We examined samples of dolostone and limestone rocks with visible signs of biodeterioration taken from the exterior wall surfaces of four Romanesque churches in Segovia (Spain): San Lorenzo, San Martín, San Millán and La Vera Cruz. Biofilms developing on the lithic substrate were analyzed by scanning electron microscopy. The most common lichen species found in the samples were recorded. Fungal cultures were then obtained from these carbonate rocks and characterized by sequencing Internal Transcribed Spacers (ITS). Through scanning electron microscopy in back-scattered electron mode, fungi (lichenized and non-lichenized) were observed as the most frequent microorganisms occurring at sites showing signs of biodeterioration. The colonization process was especially conditioned by the porosity characteristics of the stone used in these buildings. While in dolostones, microorganisms mainly occupied spaces comprising the rock's intercrystalline porosity, in bioclastic dolomitized limestones, fungal colonization seemed to be more associated with moldic porosity. Microbial biofilms make close contact with the substrate, and thus probably cause significant deterioration of the underlying materials. We describe the different processes of stone alteration induced by fungal colonization and discuss the implications of these processes for the design of treatments to prevent biodeterioration.     

The potential to retrofit sustainable drainage systems to address combined sewer overflow discharges in the Thames Tideway catchment

Experience of retrofitting sustainable drainage systems (SuDS) in the United Kingdom is limited, and there are no well‐established procedures for evaluating the feasibility, value or cost‐effectiveness of doing this, particularly at the catchment scale. This paper demonstrates a two‐phase process for evaluating the potential to retrofit SuDS to address combined sewer discharges in three subcatchments within the Thames Tideway catchment of London. The first phase evaluates what might be achieved with various levels of disconnection (‘global’ disconnection scenarios) using hydraulic models, while the second phase considers how disconnection might practically be achieved. High levels of disconnection are technically possible but practicably difficult. In selected cases, and with aggressive implementation of SuDS, combined sewer overflow CSO discharges could potentially be eliminated or reduced to acceptable levels without the need for any modifications to underground assets. However, retrofit SuDS could not eliminate the requirement for some form of sewer modification in any subcatchments.     

Mortality due to lung, laryngeal and bladder cancer in towns lying in the vicinity of combustion installations

Background

Installations that burn fossil fuels to generate power may represent a health problem due to the toxic substances which they release into the environment.

Objectives

To investigate whether there might be excess mortality due to tumors of lung, larynx and bladder in the population residing near Spanish combustion installations included in the European Pollutant Emission Register.

Methods

Ecologic study designed to model sex-specific standardized mortality ratios for the above three tumors in Spanish towns, over the period 1994-2003. Population exposure to pollution was estimated on the basis of distance from town of residence to pollution source. Using mixed Poisson regression models, we analyzed: risk of dying from cancer in a 5-kilometer zone around installations that commenced operations before 1990; effect of type of fuel used; and risk gradient within a 50-kilometer radius of such installations.

Results

Excess mortality (relative risk, 95% confidence interval) was detected in the vicinity of pre-1990 installations for lung cancer (1.066, 1.041-1.091 in the overall population; 1.084, 1.057-1.111 in men), and laryngeal cancer among men (1.067, 0.992-1.148). Lung cancer displayed excess mortality for all types of fuel used, whereas in laryngeal and bladder cancer, the excess was associated with coal-fired industries. There was a risk gradient effect in the proximity of a number of installations.

Conclusions

Our results could support the hypothesis of an association between risk of lung, laryngeal and bladder cancer mortality and proximity to Spanish combustion installations.     

Green space context and vegetation complexity shape people’s preferences for urban public parks and residential gardens

Landscape preferences shape decision-making and drive the ecological outcomes of urban landscapes. We investigate how people’s landscape preferences are shaped by the green space context (public park vs private residential garden landscapes) and by physical features such as vegetation complexity. A postal questionnaire was sent to households near seven urban parks in Melbourne, Australia. Results showed that landscapes were grouped into four categories based on patterns of preference response. Landscapes with moderate vegetation complexity were placed in separate categories distinguished by green space context (parks vs gardens), while very simple and very complex landscapes were placed in different categories irrespective of green space context. Surprisingly, dense vegetation was highly preferred by respondents. As areas of dense vegetation also provide complex habitats for wildlife, this highlights the possibility of developing policies and designing landscapes that can benefit both people and nature.     

Arsenic association and stability in long-term disposed arsenic residues

Long-term stability of arsenic residues is investigated by determining arsenic phases remaining in gold mining residues after two decades of impoundment. The residues, generated by arsenic coprecipitation with iron and lime, were disposed of in-lined sites for 9-16 years (pit C) and 16-23 years (pits A and B). Arsenic is present in the residues as As(V) species, predominantly in the form of amorphous iron arsenate (55-75% As_total, pits A and B; 55-70% As_total, pit C) and sorbed onto amorphous iron-oxyhydroxides (20-33% As_total, pits A and B; 22-37% As_total, pit C). The presence of minor Ca-arsenate phases (undefined composition) and Al-arsenate coprecipitates is also indicated. The passive enrichment of iron in pits A and B, and the relative low concentration of calcium, sulfur and arsenic if compared to those of pit C, suggest that a soluble Ca-arsenate phase (e.g. CaHAsO₄.H₂O), a fraction of gypsum and As(III) were dissolved along 16-23 years of residue disposal. The presence of As(V) only and excess iron demonstrates the importance of the oxidation state and high Fe/As ratio on long-term stability of arsenic residues.     

Performance characteristics of the anaerobic baffled reactor

An anaerobic sludge blanket process, termed the anaerobic baffled reactor (ABR), has been developed and shows promise for industrial wastewater treatment. It combines the advantages of high stability and reliability with a high void volume. The risk of clogging and sludge bed expansion with resulting high microbial losses is reduced and there is no need for special gas collection or biological solids separation systems. Organic loadings as high as 36 g COD l^?1day^?1 have been achieved with COD removal rates of more than 24 g COD l^?1 day^?1 and methane production rates exceeding 6 volumes per day per unit volume of reactor. The hypothesis, that the ABR may be adequately modeled as a fixed-film reactor, has been supported. Therefore, a unified approach, based on fundamentals of bacterial kinetics and mass transport, appears useful for modeling this and similar systems. Pilot plant studies are necessary to determine the scaling factors of the system as well as the overall efficiency and costs.     

Selective and quantitative detection of influenza virus proteins in commercial vaccines using two-dimensional high-performance liquid chromatography and fluorescence detection

In this work, we report on the applicability of two-dimensional high-performance liquid chromatography (2D-HPLC) for the comprehensive characterization of inactivated influenza vaccine proteins. This novel procedure features minimal sample treatment and combines the on-line coupling of size exclusion HPLC to reversed-phase HPLC. A comparative analysis of commercial vaccines from three different manufacturers showed the method to be highly selective by providing characteristic reproducible chromatographic profiles for each vaccine. In addition, the method provided enhanced sensitivity for most constituents as a result of the use of native fluorescence detection in the reversed-phase HPLC step. The limits of detection (at a signal-to-noise ratio of >3) for hemagglutinin (HA) antigens were 105 and 172 ng/mL for influenza A/New Caledonia/20/99 and B/Jiangsu/10/2003 strains, respectively. The potential of this 2D-HPLC procedure in terms of quantitative antigen analysis was assessed by determination of the HA content of commercial vaccines. Results provided very good correlation with nominal HA values. The reproducibility (RSD) of the whole procedure was also evaluated and was found to be better than 2 and 3% for calculated antigen concentrations expressed as micrograms of HA per milliliter in commercial vaccines for samples of the same lot (n = 5) or different lots (n = 3), respectively. In addition, it allowed the selective detection of several influenza constituents including nucleoproteins from type A and B viruses and the highly hydrophobic matrix protein 1 from both virus strains.     

Spatial scanning spectroelectrochemistry. Study of the electrodeposition of Pd nanoparticles at the liquid/liquid interface

Spatial scanning spectroelectrochemistry is a new analytical technique that provides spectral information at different distances from an electrified liquid/liquid interface where an electrochemical process takes place. As a proof of concept, we have studied two different electrochemical processes at the electrified liquid/liquid interface: (1) Ru(bpy)(3)(2+) transfer through the water/1,2-dichloroethane interface and (2) electrodeposition of Pd nanoparticles at the water/1,2-dichloroethane interface. The instrumental setup developed consists of a movable slit for the light beam to sample at well-defined positions on both sides of the interface, providing important information about the chemical process occurring. If the slit is scanned at different distances from the interface during an electrochemical experiment, a complete picture of the reactions and equilibria in the diffusion layer can be obtained. For example, in the case of the Ru(bpy)(3)(2+), the experiments show clearly how the complex is transferred from one phase to the other. In the case of electrosynthesis of Pd nanoparticles, it is demonstrated that nanoparticles are not only deposited at the interface but diffuse to the aqueous bulk solution. These in situ observations were confirmed by ex situ experiments using transmission electron microscopy.     

Electronic and structural characteristics of zinc-blende wurtzite biphasic homostructure GaN nanowires

We report a new biphasic crystalline wurtzite/zinc-blende homostructure in gallium nitride nanowires. Cathodoluminescence was used to quantitatively measure the wurtzite and zinc-blende band gaps. High-resolution transmission electron microscopy was used to identify distinct wurtzite and zinc-blende crystalline phases within single nanowires through the use of selected area electron diffraction, electron dispersive spectroscopy, electron energy loss spectroscopy, and fast Fourier transform techniques. A mechanism for growth is identified.