Carbon nanowalls deposited by inductively coupled plasma enhanced chemical vapor deposition using aluminum acetylacetonate as precursor

Well aligned carbon nanowalls, a few nanometers thick, were fabricated by continuous flow of aluminum acetylacetonate (Al(acac)₃) without a catalyst, and independent of substrate material. The nanowalls were grown on Si, and steel substrates using inductively coupled plasma-enhanced chemical vapor deposition. Deposition parameters like flow of argon gas and substrate temperature were correlated with the growth of carbon nanowalls. For a high flow of argon carrier gas, an increased amount of aluminum in the film and a reduced lateral size of the carbon walls were found. The aluminum is present inside the carbon nanowall matrix in the form of well crystallized nanosized Al₄C₃ precipitates.     

Impact of breakfast on daily energy intake - an analysis of absolute versus relative breakfast calories

Objective  

The role of breakfast energy in total daily energy intake is a matter of debate. Acute feeding experiments demonstrated that high breakfast energy leads to greater overall intake supported by cross-sectional data of a free-living population. On the other hand, a large intraindividual analysis has indicated that a high proportion of breakfast to overall intake is associated with lower daily energy intake. To evaluate these apparently contradictory results in greater detail both ways of analysis were applied to the same data set of dietary records.     

Katalysatoruntersuchungen an einer Technikumsanlage für Biomasse‐Kleinfeuerungen

In addition to the reduction of particulate matter, a catalytic supported emission reduction in small scale biomass combustion systems can also enable a conversion of toxic organic components into carbon dioxide and water. For catalyst investigations under practical conditions a special test facility was designed. The results show that products of incomplete combustion like carbon monoxide from stoves can be reduced by catalytic processes. Further developments and studies are necessary to achieve the targeted emission limits.     

Entwicklung einer leistungsstarken Mikrorektifikationsapparatur für analytische und präparative Anwendungen

In this contribution it is reported about the realization of efficient micro rectification equipment (MRA), which can be operated intermittently or continuously and be used both for analytical as well as for preparative separations of mixtures of liquid substances. Different binary systems were separated. A theoretical separation stage number of 12 was obtained together with a height equivalent to one theoretical plate of 1.08 cm. Compared to the state of microtechnology this can be regarded as an excellent progress.     

Binding of cadmium,copper, and zinc to humic substances originating from municipal solid waste compost

The application of municipal solid waste (MSW) compost increases both the trace metal loading and the organic matter in the soil. To characterize the quality and metal-binding capacity of the compost OM, we extracted humic acid (HA) and fulvic acid (FA) from mature MSW compost and analyzed them for elemental composition, acid-titratable functional groups, total metal content, and structural components (by ¹³C NMR). HA constituted 67% of all extracted humic substances and differed significantly from HAs of cultivated lands: The compost HA exhibited smaller molecular size, a higher N content, and lower aromaticity due to large amounts of saturated aliphatic components. Metal complexation studies of the extracted HA and FA were performed by equilibrium dialysis titration. The complexing capacity (CC) was highest for Cu: CC_HA = 3357 and CC_FA = 5221 μmol Cu g⁻¹ of dissolved organic carbon (DOC) at pH 5. Zn and Cd were bound (at pH 7) in smaller concentrations: CC_HA(Zn) = 2167, CC_FA(Zn) = 2809, CC_HA(Cd) = 2386, and CC_FA(Cd) = 2468 μmol metal g⁻¹ of DOC. Stability constants for binding on the strongest sites (pK_int) were determined as pK_intHA = 6.6 and pK_intFA = 7.3 for Cu at pH 5; and pK_intHA = 8.0 and pK_intFA = 6.4 for Cd at pH 7. Since these measured parameters fall within the ranges of values obtained for soil humic substances, we conclude that in soils with little organic matter, compost addition will significantly increase the amount of highly reactive organic complexing agents for trace metals in the soil.     

Liquid flow and phase holdup—measurement and CFD modeling for two-and three-phase bubble columns

Bubble columns are an important class of contacting devices in chemical industry and biotechnology. Their simple setup makes them ideal reactors for two- and three-phase operations such as fermentations or heterogeneous catalysis. Still, design and operation of these reactors is subject to widely empirical scale-up strategies. With recent advances in the development of measurement techniques, a more detailed approach to the development of optimized reactors for specific operations should become possible. This report is based on detailed measurements of local dispersed phase holdups in a pilot plant-sized bubble column operated at high superficial gas velocities and solid holdups. It deals with the influence of superficial gas velocity, solid loading and sparger geometry on measured and computed liquid flow velocities and holdup distributions. Liquid velocity measurements have been performed using the electrodiffusion method, modeling calculations have been carried out using the computational fluid dynamics (CFD) code CFX-4.3. Measurement results presented here give an insight into the development of liquid circulation and fluctuating velocity distribution depending on superficial gas velocity, solid loading and sparger geometry. CFD results implementing a multi-fluid model with k-ε turbulence and special momentum exchange terms for direct gas-solid interactions show that, even on standard PC workstations, this kind of computations can deliver qualitatively reasonable agreement with measurements.     

Burn Rate Models for Gun Propellants

In the past, Vieille's law and minor modifications of it described sufficiently the linear burning rate of gun propellants which governs the design of charges by interior ballistic simulations. Recent developments to increase the performance led to new gun concepts and innovative propellants. These are the electrothermal‐chemical gun, porous and foamed charges as well as formulations exhibiting a temperature independent burning. Vieille's law cannot fully meet experimental results in these cases. Approaches based on the heat flow equation in the solid energetic material give simplified formulas to extend the validity. These burning rate models have the ability to describe the experimentally determined burning behavior at least in a simplified or qualitative way. More sophisticated methods consider complex geometrical structures in the solid or take into account the actual progress in phase behavior and reaction kinetics of heterogeneous combustion. The dependence of the burning rate on initial temperature, on phase transitions, porous structure and gaseous reactions can be described.     

New polymer syntheses: 59. Homo-and copolyesters of 4-(4′-hydrophenoxy)benzoic acid

The homopolyester of 4-(4′-hydroxyphenoxy)benzoic acid (poly(4-HPBA)), was prepared under two different reaction conditions and compared with a sample provided by another research group. Depending on the synthetic route, different melting points, d.s.c. traces and crystal lattices were found. However, after repeated heating and cooling, one thermodynamically stable modification with a melting point of 370–375°C can be obtained. Copolyesters of 4-hydroxybenzoic acid and 4-(4′-hydroxyphenoxy)benzoic acid were prepared with various molar ratios either in the melt (condensation in bulk) or in solution. These copolyesters were characterized by elemental analyses, ¹H n.m.r. spectroscopy, d.s.c. measurements, wide-angle X-ray scattering measurements at various temperatures, and optical microscopy. Whereas copolyesters prepared in solution do not melt below 500°C, those prepared by polycondensation in bulk show melting points down to approximately 260°C and form a nematic melt.     

Structure Formation of Integral Asymmetric Composite Membranes of Polystyrene‐block‐Poly(2‐vinylpyridine) on a Nonwoven

The formation of an integral asymmetric membrane composed of a cylinder‐forming polystyrene‐block‐poly(2‐vinylpyridine) on a nonwoven by using solvent casting followed by solvent/nonsolvent exchange (phase inversion) is reported for the first time. The influence of parameters such as solvent composition, evaporation time of the solution‐cast block copolymer film before phase inversion, and immersion bath temperature is demonstrated. The optimized membranes are characterized in terms of stimuli‐responsive water flux properties. The morphologies of the membranes as well as of the bulk of the block copolymer are imaged by scanning force microscopy, scanning electron microscopy, and transmission electron microscopy.

     

Effect of Silica‐Coated Poly(butyl methacrylate)‐block‐poly(methyl methacrylate) Double‐Shell Particles on the Mechanical Properties of PMMA Composites

Silica nanoparticles with an average diameter of 12 nm are grafted with PBMA‐b‐PMMA double shells through typical sequential ATRP from bromoisobutyrate initiators anchored at the silica surface using an epoxysilane. A commercially available PMMA homopolymer is used for the preparation of composites with unmodified, silane‐modified and double‐shell‐modified silica particles. Good mechanical properties are obtained for silica double shell containing systems. The silica content in double shell particle systems is varied from 0 to 2.5 wt%. A significant improvement in impact properties is observed. The surface‐modified silica particles are characterized by ATR‐FTIR, NMR, GPC, and thermal analyses. TEM analysis is used to analyze the nature of dispersion of particles in the composites.