Exploiting the high-frequency performance of low-voltage low-power SC filters

This paper investigates the design of low-voltage low-power switched-capacitor (SC) filters for high-frequency applications by using the clock-booster approach. In particular, our proposed SC filter architecture uses single-ended double-sampling integrator cells based on low-voltage operational transconductance amplifiers which take advantage of dynamic biasing and the clock-booster technique to drive the switch transistors. To validate its high-frequency capability, two low-pass elliptic SC filters respectively with a corner frequency of 6 and 8-MHz, were designed in a 0.35-/spl mu/m CMOS process. Both are suitable for telecom applications and can operate with a power supply as low as 1.5 V, while dissipating 11 mW. Measurements showed that for an output amplitude of 1 V/sub pp/, their total harmonic distortions were maintained well below -40 dB in their bandwidths. Comparisons with other SC filter implementations in the literature, which highlight the quality of our implementation are also provided.     

Structural integrity in electronics

With continuing miniaturisation, increased performance demands and the requirement to remove lead from solder alloys, the challenges to structural integrity and reliability of electronic equipment are substantial and increasing. This paper outlines typical features in electronic equipment of which the structural integrity community may be generally unaware. Potential failure modes in service are described, and the problems of scale and material characteristics are considered. Progress in the application of fracture mechanics to the life prediction of interconnections is reviewed. The limited evidence available suggests that the crack growth resistance of silver‐containing lead‐free solders is superior to that of the traditional Sn‐37Pb under cycle‐controlled conditions but there is no difference when time‐dependent conditions prevail. In several respects, it is contended that the electronics sector is faced with challenges at least equivalent to those encountered in gas turbines and nuclear power generation.     

On teletraffic applications to OBS

We provide teletraffic models for loss probability evaluation of optical burst switching (OBS). We show that the popular Engset formula is not exact for OBS modeling and demonstrate that in certain cases it is not appropriate. A new exact model is provided. The various models are compared using numerical results for various OBS alternatives with and without burst segmentation.     

Examining a curvilinear relationship between communication frequency and team performance in cross-functional project teams

The performance of a cross-functional team depends on the skillful and innovative combination of information and expertise from all team members. Communication is the medium through which team members share the information required for successful amalgamation. In this work, we postulate that both high and low levels of team communication can impede team performance, thus leading to a curvilinear relationship between team performance and team communication. To test this hypothesis, the relationships between face-to-face, e-mail, and telephone communication and team performance were examined for 60 cross-functional project teams. E-mail and face-to-face communication were curvilinearly associated with performance, but telephone communication was not. Further analysis of the communication frequency between colocations showed that e-mail is the only medium for which usage increased with distance.     

1.6 Tbit/s (40/spl times/40 Gbit/s) DPSK transmission over 3/spl times/100 km of TeraLight fibre with direct detection

By transmitting 40 channels over 300 km of TeraLight fibre, it is shown that optical differential phase shift keying can be used in 100 GHz-spaced 40 Gbit/s systems, with direct detection and a simple receiving filter. Chromatic dispersion tolerance around 300 ps/nm is also measured, compared to 70 ps/nm for NRZ.     

Positively Thermo‐Sensitive Monodisperse Core–Shell Microspheres

In this paper, we report on a novel family of monodisperse thermo‐sensitive core–shell hydrogel microspheres that is featured with high monodispersity and positively thermo‐responsive volume phase transition characteristics with tunable swelling kinetics, i.e., the particle swelling is induced by an increase rather than a decrease in temperature. The microspheres were fabricated in a three‐step process. In the first step, monodisperse poly(acrylamide‐co‐styrene) seeds were prepared by emulsifier‐free emulsion polymerization. In the second step, poly(acrylamide) or poly[acrylamide‐co‐(butyl methacrylate)] shells were fabricated on the microsphere seeds by free radical polymerization. In the third step, the core–shell microspheres with poly‐ (acrylamide)/poly(acrylic acid) based interpenetrating polymer network (IPN) shells were finished by a method of sequential IPN synthesis. The proposed monodisperse core–shell microspheres provide a new mode of the phase transition behavior for thermo‐sensitive “smart” or “intelligent” monodisperse micro‐actuators that is highly attractive for targeting drug delivery systems, chemical separations, sensors, and so on.     

Power combining characteristics of backed-off traveling wave tubes for communications applications

Traveling wave tubes (TWTs) used in multi-tone and digital communications applications are typically operated backed off from saturation in order to improve the amplifier linearity. This reduces the bit error rate (BER), decreases intermodulation distortion and lowers adjacent channel power; all at the expense of reducing the average output power. For emerging telecommunications applications, the average power requirement is increasing to provide higher bit rates and lower BER, and often exceeds the power obtainable from backed-off space or telecommunications TWTs. One solution is to power combine TWTs that are operated 3 to 10 dB backed off from saturation. Efficient power combining requires that the phase and gain of the signal from each TWT be closely matched. To understand the variation in these parameters across a build-set of tubes, the phase and gain versus drive of 35 Boeing S-band 5525H TWTs were measured. The standard deviation in the phase about the mean phase shift measured at saturation was found to be 2.6/spl deg/, with a related standard deviation of the gain compression at saturation of 0.22 dB. These levels result in small power combining losses and small errors in phased-array fed multi-beam antennas in broadband multi-tone applications.     

Optoelectronically-pulsed antennas: characterization andapplications

A brief tutorial on the picosecond photoconductive effect is given. The use of picosecond optoelectronics for the characterization of broadband antennas is described. In particular, the transient radiation properties of equiangular-spiral and exponentially tapered coplanar-strip antennas are discussed. The transient radiation behavior and the polarization and radiation patterns of these antennas are easily determined with this measurement technique, without the need for anechoic chambers. Applications of picosecond-duration transient electromagnetic radiation to filter measurements, materials measurements, and scattering studies are discussed     

Characterisation of a 300× photovoltaic concentrator system with one-axis tracking

A solar concentrator with one-axis tracking is being developed at our institute. This concentrator system achieves a high geometrical concentration ratio of 300 using a parabolic trough mirror and a three-dimensional second stage consisting of compound parabolic concentrators. The design of the system as well as the characterisation of the second stage is described in this paper.