Service Load Effective Compression Flange Width in Fiber Reinforced Polymer Deck Systems Acting Compositely with Steel Stringers

This paper reports on the field study of a steel stringer-fiber reinforced polymer (FRP) deck composite bridge in Pennsylvania. The objective of the study is to assess the effective compression flange width in the FRP deck and floor systems when they act compositely with underlying steel girders at service conditions. The research results reported herein support the notion of employing a design approach, for both interior and exterior girders of a composite floor system, that is philosophically consistent with current practice related to steel girders acting compositely with concrete decking. It appears from the results presented herein that FRP decks and floors acting compositely with underlying steel girders exhibit an effective width that is close to the actual girder spacing for interior beams, and approximately one-half this value for exterior beams.     

A near-optimal multiuser detector for DS-CDMA systems using semidefinite programming relaxation

A multiuser detector for direct-sequence code-division multiple-access systems based on semidefinite programming (SDP) is proposed. It is shown that maximum likelihood (ML) detection can be carried out by "relaxing" the associated integer programming problem to a dual SDP problem, which leads to a detector of polynomial complexity. Computer simulations that demonstrate that the proposed detector offers near-optimal performance with considerably reduced computational complexity compared with that of existing primal-SDP-relaxation based detectors are presented.     

Uncertainty specification for data acquisition (DAQ) devices

Specification of uncertainty has historically been done by a variety of methods with differences in results, especially for instruments and standards that achieve small uncertainty values. A relatively simple but practical approach is used in newly published standard IEC 62008 1st Edition, "Performance characteristics and calibration methods for digital data acquisition systems and relevant software." The standard currently covers only relevant manufacturer's specifications for direct current (dc) data acquisition (DAQ) devices. These are plug-in cards without the associated computer for readout and control or power supply. Rather than complete instruments, the cards require an associated computer for readout and control. The history of uncertainty is reviewed; some popular current techniques for specifying uncertainty are compared. The components of uncertainty chosen for DAQ plug-in cards are reviewed, and their effects are discussed.     

OMI very fast delivery and the Sodankyla/spl uml/ Satellite Data Centre

The Ozone Monitoring Instrument (OMI) operates onboard the National Aeronautics and Space Administration's Earth Observing System Aura satellite, which was launched in July 2004. Like its sister spacecraft Terra and Aqua, Aura's capabilities include direct broadcast (DB), i.e., the ability to broadcast data at the same time as they are being measured and stored in the spacecraft's memory for later transmission to Earth. The Finnish Meteorological Institute's Satellite Data Centre at Sodankyla/spl uml/ in Finnish Lapland is exploiting this capability to receive OMI data while Aura is in sight of the receiver, which enables nearly immediate production of OMI data products for a region that includes a large part of Europe, stretching from the North Pole to the Italian Alps. The current OMI Very Fast Delivery (VFD) products include maps of surface UV-B, ozone columns, and cloud coverage.     

The Hardness of the Closest Vector Problem With Preprocessing Over$ell_infty$Norm

We show that the closest vector problem with preprocessing (CVPP) over lscr _infin norm (CVPP_infin) is NP-hard. The result is obtained by the reduction from the subset sum problem with preprocessing to CVPP_infin. The reduction also shows the NP-hardness of CVP_infin, which is much simpler than all previously known proofs. In addition, we also give a direct reduction from exact 3-sets cover problem to CVPP_infin     

Very low surface recombination velocities on p-type silicon wafers passivated with a dielectric with fixed negative charge

Surface recombination velocities as low as 10 cm/s have been obtained by treated atomic layer deposition (ALD) of Al₂O₃ layers on p-type CZ silicon wafers. Low surface recombination is achieved by means of field induced surface passivation due to a high density of negative charges stored at the interface. In comparison to a diffused back surface field, an external field source allows for higher band bending, that is, a better performance. While this process yields state of the art results, it is not suited for large-scale production. Preliminary results on an industrially viable, alternative process based on a pseudo-binary system containing Al₂O₃ are presented, too. With this process, surface recombination velocities of 500–1000 cm/s have been attained on mc-Si wafers.     

The role of modelling in identifying drug targets for diseases of the cell cycle.

The cell cycle is implicated in diseases that are the leading cause of mortality and morbidity in the developed world. Until recently, the search for drug targets has focused on relatively small parts of the regulatory network under the assumption that key events can be controlled by targeting single pathways. This is valid provided the impact of couplings to the wider scale context of the network can be ignored. The resulting depth of study has revealed many new insights; however, these have been won at the expense of breadth and a proper understanding of the consequences of links between the different parts of the network. Since it is now becoming clear that these early assumptions may not hold and successful treatments are likely to employ drugs that simultaneously target a number of different sites in the regulatory network, it is timely to redress this imbalance. However, the substantial increase in complexity presents new challenges and necessitates parallel theoretical and experimental approaches. We review the current status of theoretical models for the cell cycle in light of these new challenges. Many of the existing approaches are not sufficiently comprehensive to simultaneously incorporate the required extent of couplings. Where more appropriate levels of complexity are incorporated, the models are difficult to link directly to currently available data. Further progress requires a better integration of experiment and theory. New kinds of data are required that are quantitative, have a higher temporal resolution and that allow simultaneous quantitative comparison of the concentration of larger numbers of different proteins. More comprehensive models are required and must accommodate not only substantial uncertainties in the structure and kinetic parameters of the networks, but also high levels of ignorance. The most recent results relating network complexity to robustness of the dynamics provide clues that suggest progress is possible.     

Age effects in coding tasks: Componential analysis and test of the sensory deficit hypothesis.

Multiple forms of a symbol-digit substitution task were used to provide a componential analysis of age differences in coding task performance. The results demonstrated age differences in feature encoding, memory, and visual search. A 2nd experiment was conducted with young adults to investigate a sensory deficit as a locus of age differences. The spatial contrast sensitivity deficit of older adults was simulated on forms by applying a digital filter. Persons in the age-simulated contrast condition performed worse than those in the normal contrast condition. The stimulus degradation effect was linked to visual search speed. The study illustrates the utility of componential analysis and offers direct support for the hypothesis that sensory deficits affect performance on tasks used to assess intelligence (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Coherence-Based 3-D and Spectral Imaging and Laser-Scanning Microscopy

The basics of three-dimensional (3-D) and spectral imaging techniques that are based on the detection of coherence functions and other related techniques are reviewed. The principle of the 3-D source retrieval is based on understanding the propagation law of optical random field through the free space. The 3-D and spectral information are retrieved from the cross-spectral density function of optical random field or numerical calculation of the inverse propagation of the cross-spectral density. We will first introduce the coherence-based spectral tomography techniques with low-coherence light sources. These techniques limit their scheme of coherence detection only along the optical axis and some of them achieve simultaneously the high resolution and high speed of detection taking advantage of an imaging lens. We then provided explanations of the principle of 3-D source retrieval that is based on the propagation law of optical random field through the free space along with the introduction of the numerical holography and computed tomography techniques. We will lastly show 3-D spectral imaging schemes with the concurrent laser-scanning cross-sectioning techniques: one is the confocal laser scanning microscopy and the other is the two-photon laser-scanning fluorescence microscopy.