Low surface energy films based on partially fluorinated isocyanates: the effects of curing temperature

Self-stratification strategy can be used to prepare films in which both bulk and surface properties can be optimized. By using this approach, only a very small quantity of fluorinated species is needed to generate a surface with low surface energy. When cross-linking is involved during film formation, we are dealing with a competition behavior between the diffusion of fluorinated species and the formation of cross-linked network. In this study low surface energy polymeric films were prepared on the basis of partially fluorinated polyisocyanates, in combination with hydroxyl-end-capped three-armed solventless liquid oligoesters and modified hyperbranched polyesters. At a fluorine concentration of only 0.5 wt.%, contact angles of water and hexadecane can reach 120° and 80°, respectively. A surface energy as low as 10–15 mN/m can be obtained upon the addition of less than 1 wt.% of fluorine in the films. It was shown, from real time ATR-FTIR and contact angle measurements, that the curing temperatures demonstrated significant effects on the cross-linking rate as well as on the wettability of the films.     

Block Copolymer Surface Reconstuction: A Reversible Route to Nanoporous Films

Thin films of block copolymers have been used as templates and scaffolds for the fabrication of arrays of nanostructured materials. In general, a chemical modification of the film or the removal of one of the components by photodegradative methods is required to produce a nanoporous film that serves as a template or scaffold. Here, however, the preferential interaction of one of the components with a solvent is shown to produce a reconstruction of the block copolymer film that, upon drying, leads to the generation of a nanoporous template. The area density of the pores is identical to that of the original copolymer thin film. Since no chemical reactions occurr, the process is fully reversible. Upon heating the copolymer film above its glass‐transition temperature, mobility is imparted to the copolymer and the original copolymer film with oriented domains is recovered. The film reconstruction significantly simplifies the generation of nanoporous templates.     

Self-consistent scattering model of carrier dynamics in GaAs-AlGaAs terahertz quantum-cascade lasers

Intersubband electron scattering transport in terahertz GaAs-AlGaAs quantum cascade lasers is analyzed, using a full 13-level self-consistent rate equation model. The approach includes all relevant scattering mechanisms between injector-collector and active region states in the cascade structures. Employing an energy balance equation which includes the influence of both electron longitudinal optical phonon and electron-electron scattering, the method also enables evaluation of the average electron temperature of the nonequilibrium carrier distributions in the device. The electron temperature is found to give a strong influence on the output characteristics, particularly at very low temperatures. The threshold currents and electric field-current density characteristics are in very good agreement with experiment, implying that the model has a strong predictive capability.     

Laser-assisted sealing and testing for ceramic packaging of MEMS devices

In this work, a CO/sub 2/ laser-assisted silicon lid sealing process, utilizing Au80/Sn20 solder, for encapsulating gas breakdown test micro-electro-mechanical structures (MEMS) in a ceramic quad flatpack (CQFP) was studied. Wire bonded MEMS dies were sealed into CQFPs under various gas media, such as air, nitrogen, helium and vacuum. The gas breakdown test results showed a significantly higher breakdown voltage for vacuum packaged parts compared to those packaged in other various gas environments. Hermeticity testing according to MIL-STD-883E showed that the leak rate of the package was below 10/sup -8/ atm cc/s. The bonding was uniform and the bonding strength is believed to be comparable to the tensile strength of Au80/Sn20 solder.     

Anaphylaxis in Association with Heparin-Induced Thrombocytopenia

Heparin is almost universally used as an anticoagulant during hemodialysis. Rare but serious side effects of heparin therapy include heparin‐induced thrombocytopenia (HIT) and anaphylaxis, and these may lead to significant mortality and morbidity if left unrecognized. We are reporting a patient who developed HIT followed by an anaphylactoid reaction. This 8‐year‐old girl with Joubert's syndrome developed end‐stage renal disease secondary to nephronophthisis. She had a Permacath double‐lumen hemodialysis catheter placed in the right internal jugular vein and was started on hemodialysis using an Asahi B10 65 Dialyzer on 1/28/03. The platelet count at that time was 246 × 10³/mL. Beef lung heparin was used for anticoagulation. She was admitted for living related donor renal transplant on 2/10/03 but was found to be thrombocytopenic with a platelet count of 49 × 10³/mL. The transplant was postponed, a sepsis work‐up was performed, and she was started on antibiotics pending culture results. Hemodialysis was continued with heparin anticoagulation, and despite an improvement in the platelet count she had an acute anaphylactoid reaction 2 days later. The reaction occurred 20 min after starting her hemodialysis treatment and presented as acute onset of bronchospasm, agitation, and chest discomfort. She improved with nebulized albuterol and subcutaneous epinephrine. A review of her records revealed that she had received 6 hemodialysis treatments. The platelet count on 2/3/03, after 3 hemodialysis treatments, had been 242 × 10³/mL and on 2/8/03 after 5 treatments the platelet count was 72 × 10³/mL. HIT with anaphylaxis was suspected. Heparin was discontinued and the platelet count had returned to normal within 2 days. The diagnosis was confirmed by a positive heparin‐associated antibody test. While HIT is recognized as a complication in 1–5% of patients treated with heparin and has been well described in the literature, we could only find 2 reported cases of heparin‐induced anaphylaxis and in both cases there was accompanying thrombocytopenia. This patient further illustrates a possible linkage between these two phenomena. HIT is an important cause of thrombocytopenia in a patient on hemodialysis and continued exposure to heparin may induce anaphylaxis.     

Family preservation using multisystemic therapy: An effective alternative to incarcerating serious juvenile offenders.

Multisystemic therapy (MST) delivered through a community mental health center was compared with usual services delivered by a Department of Youth Services in the treatment of 84 serious juvenile offenders and their multiproblem families. Offenders were assigned randomly to treatment conditions. Pretreatment and posttreatment assessment batteries evaluating family relations, peer relations, symptomatology, social competence, and self-reported delinquency were completed by the youth and a parent, and archival records were searched at 59 wks postreferral to obtain data on rearrest and incarceration. In comparison with youths who received usual services, youths who received MST had fewer arrests and self-reported offenses and spent an average of 10 fewer weeks incarcerated. In addition, families in the MST condition reported increased family cohesion and decreased youth aggression in peer relations. The relative effectiveness of MST was neither moderated by demographic characteristics nor mediated by psychosocial variables. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

NEURAL NETS SPEED FLOW CALCULATION

Neural Nets Successfully Solve Complex Fluid Flow Problem. Much research is being done in the area of neural networks, and industry is actively seeking successful application to real world problems. We describe here a successful application. We have used neural networks to model complex coolant flow patterns, such as those encountered in design of hypersonic aircraft. Previous calculation methods, while reasonably accurate, are iterative and extremely time consuming. Our new approach uses a hierarchical neural network architecture to model coolant flow distribution in multiple heat exchanger panels. This method is direct, fast, and accurate.     

Synthesis and evaluation of hexafluorodimethylcarbinol functionalized polymers as microsensor coatings

Polystyrenes, polyacrylates, and poly(3,4-isoprenes) incorporating the hexafluorodimethylcarbinol functionality have been synthesized, characterized, and tested as microsensor coatings on a surface acoustic wave (SAW) device for dimethyl methylphosphonate (DMMP) vapor absorption sensitivity. The syntheses involved monomer functionalization and polymerization or hexafluoroacetone reaction with preformed polymer. All fluoroalcohol functionalized polymer coatings displayed sub parts per million level sensitivity with the slope of the absorption isotherm steepest at low DMMP concentrations. The order of sensitivity for the isomeric polystyrene fluoroalcohols (meta > para ? ortho) paralleled that of the relative free hydroxyl to hydrogen-bonded hydroxyl content. Strong hydrogen bonding between the fluoroalcohol polymers and DMMP vapor was observed by IR spectroscopy. Acylation of the fluoroalcohol group markedly reduced the DMMP sensitivity.     

A frequency domain ultrasonic model for the pulse-echo transducer response of an arbitrary scatterer in a fluid

A very general model formulation is presented in the frequency domain for the pulse-echo ultrasonic response of an arbitrary scatterer in a fluid. The transducer is modeled as a piston source and the scatterer can be located anywhere in the transducer wavefield. The model is computationally efficient and is shown to agree well with initial experiments.     

Multisource-sputtered ErBa2Cu3O7−x films on single-crystal and buffered crystalline substrates

High-quality superconducting films of erbium-barium-copper-oxide have been produced in a multisource sputtering system on a variety of substrates, including buffered sapphire and silicon wafers as well as various single-crystal materials. Fine-grained polycrystalline films with narrow (<4 K) resistive transitions have been grown on a number of different substrates. The use of erbium in the 12–3 compound leads to improved film morphology and to more forgiving conditions for establishing of the superconducting phase. Sputtered neutral mass spectroscopy (SNMS) yields useful information about the compositional profile of the films.