Dynamic laser control using feedback from a gain grating

We demonstrate that self-induced gain gratings can provide nonlinear optical feedback that results in single frequency selection and passive self Q-switching of a conventional linear laser cavity. An experimental Nd:YAG laser system is described that yields a temporally-smooth 20 ns pulse at 1.064 μm. In addition, we show that the feedback has phase-conjugate properties that permit “flower-like” mode formation even though the azimuthal symmetry of the cavity is broken     

Encapsulation of PV modules using ethylene vinyl acetate copolymer as a pottant: A critical review

The primary purpose of this work is to review the literature about what is and is not known about using ethylene vinyl acetate (EVA0 copolymer as the encapsulant (or pottant) material in photovoltaic (PV) modules. Secondary purposes include elucidating the complexity of the encapsulation problem, providing an overview about encapsulation of PV cells and modules, providing a historical overview of the relevant research and development on EVA, summarizing performance losses reported for PV systems deployed since ca. 1981, and summarizing the general problems of polymer stability in a solar environment. We also provide a critical review of aspects of reported work for cases that we believe are important.Failure modes resolved in the early work to establish reliability of deployed modules and the purposes and properties of pottants, are summarized. Typical performance losses in large field-deployed, large-scale systems ranging from 1% to 10% per year are given quantitatively, and qualitative reports of EVA discoloration are summarized with respect to ultraviolet (UV), world-wide location and site dependence.The general stability of polymers and their desirable bulk properties for solar utilization are given. The stabilization formulation for EVA, its effectiveness, and changes in it during degradation are discussed. The degradation mechanisms for the base resin, e.g., unstabilized Elvax 150^TM, and stabilized EVA are indicated for literature dating to the early 1950s, and the role played by unsaturated chromophores is indicated. The limited number of studies relating discoloration and PV cell efficiency are summarized.Observed degradation of EVA or the unstabilized base resin in the laboratory and examples used to measure the degradation are summarized in sections entitled: (1) thermally-induced degradation; (2) photodegradation and photothermal degradation of EVA in different temperature regimes; (3) photobleaching and photodegradation of the UV absorber and cross-linking agent; (4) acetic acid and metal and metal-oxide catalyzed oxidative degradation; and (5) discolaration and PV cell efficiency losses.Processing effects/influences on EVA stability are discussed in sections entitled: (1) EVA raw materials and extruded, uncured films; (2) thermal encapsulation processes; (3) effects of lamination, curing, and curing peroxide on gel content and chromophores formed; and (4) incomplete shielding of curing-generated chromophores. A summary is given for the limited number of accelerated lifetime testing efforts and examples of erroneous service lifetime predictions for EVA are discussed. The known factors that effect the discoloration rate of several EVA formulations are discussed in which the reduction in rate by using UV-absorbing superstrates is a prime example. A summary is given of what is and is not known about EVA degradation mechanisms, degradation from exposures in field-deployed modeules and/or laboratory testing, and factors that contribute to EVA stability or degradation. Finally, conclusions about using Elvax 150 in EVA formulations are summarized, and future prospects for developing the next-generation pottant for encapsulating PV modules are discussed.     

Crystallographic shear planes in nanocrystalline SnO2 thin films by high-resolution transmission electron microscopy

Atomic structures of crystallographic shear planes (CSPs) in nanocrystalline thin films of semiconductor SnO₂ were investigated by high-resolution electron microscopy. The films were prepared by electron beam evaporation in high vacuum (10^–6 torr) and followed by annealing in synthetic air at 700 °C for 1–2 H. CSPs with the displacement vector of [1/2 0 1/2] were observed in the planes parallel to (¯101), (110) and (¯3¯21). Most of the CPSs were found to terminate or interact with each other within SnO₂ crystallites. Partial dislocations exist at terminal places of CSPs or along intersecting lines of CSPs. CSP steps were also observed. Structural models of these defects have been proposed. Based on analysis of experimental data, it has been suggested that the Sn/O ratio at CSPs which are not parallel to their displacement vector, at cores of partial dislocations and at CSP steps, is higher than that of the perfect structure, that is, these defects are able to provide extra free electrons with the films.     

Two-dimensional pentagon quasicrystal in an Al-Co-Ni-Tb alloy obtained by quenching under high static pressure

A transmission electron microscopy study of quasicrystals was carried out in Al-Co-Ni-Tb alloy which was obtained by quenching under high static pressure and a new two-dimensional pentagonal quasicrystal was discovered. An unique five-fold axis is observed in its diffraction patterns and the periodicity along the five-fold axis is 0.4 nm. Another feature of the pentagonal phase is that no extinction exists in the diffraction patterns along the direction perpendicular to the five-fold axis. A comparison of the high resolution electron microscopy images of the pentagonal phase and the decagonal quasicrystal is given. The effect of high pressure is discussed.     

Complex variable formulations for usual and hypersingular integral equations for potential problems — with applications to corners and cracks

This paper first presents an unified discussion of real and complex boundary integral equations (BIEs) for two-dimensional potential problems. Relationships between real and complex formulations, for both usual and hypersingular BIEs, are discussed. Potential problems in bounded as well as in unbounded domains are of concern in this work. Quantities of particular interest are derivatives of the primary field that exhibit discontinuities across corners, as well as stress intensity factors at the tips of mode III cracks. The latter problem in an application of a recent generalization of the well-known Plemelj-Sokhotsky formulae. Numerical implementations and results for interior problems in bounded domains, as well as for crack problems in unbounded domains, are presented and discussed.C. Y. Hui is supported by the Material Science Center at Cornell University, which is funded by the National Science Foundation (DMR-MRL program). S Mukherjee acknowledges partial support from NSF grant number ECS-9321508 to Cornell University.     

Charge-based capacitance measurements (CBCM) on MOS devices

A new simple method of measuring capacitance-voltage characteristics of MOS devices is presented. Proceeding from the charge-based capacitance measurement technique suggested recently, a compact test structure with high resolution has been developed, which only requires measurement of do quantities. The method was tested on a 0.6-μm CMOS process with small and large area capacitors and compared to well-known high-frequency capacitance-voltage results. Beside using a reference structure, a second means of extracting parasitic effects is demonstrated for small structures. The test structure allows measurements in a wide frequency range with high accuracy and low noise contribution at small capacitance levels     

A typed functional extension of logic programming

A logic language is suitable for specification if it is equipped with features for data abstraction and modularization. In this paper, an effective mechanism to incorporate function and type into logic programming is presented as the means to embed data abstraction mechanism into logic programming. This incorporation is essentially based on Horn clause logic with equality and a polymorphic type system that is an extension of Mycroft and O’Keefe’s system. This paper also presents an implementation based on Warren Abstract Machine (WAM) and shows the performance, along with a comparison with WAM.     

Observers for stabilization of systems with matched uncertainty

In this article, we study the design of observer-based robust linear feedback controllers. The uncertainty, which can enterA, and either theB orC matrices, is assumed to satisfy certain matching conditions. Lyapunov techniques are used to establish sufficient conditions for stability, given an uncertainty bound. In particular, sufficient conditions are obtained that, if met, result in stabilizing controllers regardless of the size of the uncertainty entering the system matrix, as long as the standard constraints on the uncertainty entering the input or output matrices are met. As with the case of more general forms of uncertainty, the resulting observers often have high gains. To study performance, the problem of disturbance rejection is considered. Sufficient conditions are presented for obtaining control laws that stabilize the closed loop system, regardless of the size of the uncertainty entering the system matrix, while simultaneously guaranteeing arbitrarily small infinity norm for the transfer function from the plant disturbances to the outputs.     

X441对数放大器的原理及其应用

本文主要介绍X441单片对数放大器的基本原理和应用,并列举了一些具体应用电路。