Recursive solution of inverse natural convection problems by means of mode reduction

 A recursive method based on the Kalman filtering is developed to solve inverse natural convection problems of estimating the unsteady nonuniform wall heat flux from temperature measurements in the flow. By employing the Karhunen–Loève Galerkin procedure that reduces the Boussinesq equation to a small set of ordinary differential equations, the computational difficulties associated with the Kalman filtering for the partial differential equations are overcome. The present method is assessed through several numerical experiments, and is found to yield satisfactory results. Received 20 January 2001 / Accepted 31 May 2001     

Erythrocyte sodium lithium countertransport in normal and hypertensive pregnancy: relation to haemodynamic changes

OBJECTIVE: To establish the changes in erythrocyte sodium lithium countertransport (SLC) with advancing normal pregnancy and to determine if these changes were different in pregnancy induced hypertension (PIH). The changes in both groups were assessed in relation to haemodynamic changes. DESIGN: SLC, mean arterial pressure (MAP), cardiac output (CO) and total peripheral vascular resistance (TPVR) were determined serially during normal pregnancy and cross-sectionally in PIH. Women were studied again 20 weeks after delivery where possible. SETTING: Routine antenatal clinic and antenatal ward of a regional reference centre. SUBJECTS: Fifty-one normal primigravid women were studied serially and 41 primigravid women with PIH were studied at time of diagnosis. RESULTS: During normal pregnancy SLC (mmol Li/h/l cells) increased from a nonpregnant value of 0.24 +/- 0.02 (mean +/- SEM) to 0.32 +/- 0.02 at 14 weeks, and 0.37 +/- 0.02 at 20 weeks gestation. This was maintained until 38 weeks (0.40 +/- 0.02). The increase until 20 weeks occurred at the time of greatest change in CO (5.10 +/- 0.18 to 6.79 +/- 0.20 l/min) and TPVR (1327 +/- 58 to 969 +/- 33 dyn/s/cm-5). The decrease in TPVR with a rise in SLC is opposite to the relation reported in essential hypertension so that a functional relation is unlikely. However, the changes within pregnancy were positively correlated (r = 0.43, P < 0.01). In hypertensive pregnancies TPVR was elevated compared with normotensive pregnancies (1543 +/- 100 vs 1090 +/- 37) but the SLC was not different from that found in normotensive pregnancies (0.43 +/- 0.02 vs 0.40 +/- 0.02). CONCLUSIONS: The changes in SLC activity suggest dynamic effects on erythrocyte membrane function during pregnancy. However, no differences could be found between normal and hypertensive pregnancy and SLC is unlikely to be of value as a marker of hypertensive risk during pregnancy.     

Molecular analysis of cellulose biosynthesis in Arabidopsis

Cellulose, an abundant, crystalline polysaccharide, is central to plant morphogenesis and to many industries. Chemical and ultrastructural analyses together with map-based cloning indicate that the RSW1 locus of Arabidopsis encodes the catalytic subunit of cellulose synthase. The cloned gene complements the rsw1 mutant whose temperature-sensitive allele is changed in one amino acid. The mutant allele causes a specific reduction in cellulose synthesis, accumulation of noncrystalline beta-1,4-glucan, disassembly of cellulose synthase, and widespread morphological abnormalities. Microfibril crystallization may require proper assembly of the RSW1 gene product into synthase complexes whereas glucan biosynthesis per se does not.     

Lithographic and pattern transfer of a novel deep-UV photoresist: ARCH2

We have developed a novel chemically amplified deep-UV photoresist called ARCH2. ARCH2 displays a resolution of<0.23μm with a DOF of 1.0μm at 0.25μm. This material also displays superior time delay stability (>8 hours). The post exposure bake (PEB) temperature was varied from 100°C to 120°C and the PEB time was varied from 60s to 180s. This had very little effect on the CD of the resist profiles. Preliminary etching experiments in a conventional reactive ion etcher were then carried out using CF₄ to etch TiN. In these experiments the ARCH2 etched at a similar rate as conventional Novolac.     

Gain-coupled DFB lasers with a titanium surface Bragg grating

The improved performance of gain-coupled DFB lasers incorporating a titanium surface Bragg grating and a strained layer multiquantum well active region for operation at 1.55 μm is presented. Besides the essentially simplified fabrication process, the incorporation of the metallic, absorptive grating yields stable singlemode operation with a high sidemode suppression     

Calculation of wall heat transfer in pipeexpansion turbulent flows

A new modified low-Reynolds-number k-ε turbulence [Chang, Hsieh and Chen (CHC)] model, which possesses the proper near-wall limiting behaviors and is free of the singular defect occurring near the reattachment point when applied to separated flows, is examined for use in wall heat transfer problems in flow with pipe expansion geometry. Another eight low-Reynolds-number k-ε models, found in open literature, are also examined in this study. Attention is specifically focused on the flow region surrounding the reattachment point. Comparative results show that only the CHC model and the model developed by Abe et al. [Abe, Kondoh and Nagano (AKN model)] can yield satisfactory distributions of the Nusselt number along the wall. However, the CHC model adopted the same model constants as conventionally used for the standard k-ε model. Thus, the CHC model is more universal than the AKN model.     

The orientation dependence of fatigue-crack growth in 8090 Al-Li plate

A series of fatigue-crack growth rate (FCGR) tests was carried out on 8090 Al-Li plate to examine the effects of specimen orientation on fatigue-crack growth. The directionality of fatigue fracture behavior is found to be related to the strong {110}〈112〉 texture in this alloy. Based on a previously developed transgranular FCGR model using restricted slip reversibility (RSR) concepts, [1] a mechanistic model is developed for transgranular fatigue-crack growth in highly textured materials. The model takes the form of the Paris relationship with a power law exponent of 3, and the material texture is shown to strongly influence the proportional factor. The effect of texture on FCGR is related through a geometric factor cos² ϕ, where ϕ defines the angle between the load axis and the normal of the favorable slip plane. The effect of specimen orientation on FCGR in 8090 Al-Li alloy is shown to be related to a combination of its anisotropic mechanical properties and the variation of angleϕ with specimen orientation. The model further predicts that fatigue-crack growth rates will be slower in many textured materials than texturefree materials becauseϕ > 0 and cos₂ ϕ < 1.     

Evolution and functional morphology of primate facial skulls

Both ontogenetically and phylogenetically the facial skull of primates consists of two components: the endocranial nasal capsule, and the exocranial membrane bones. The cartilaginous nasal capsule of the fetal period constitutes the framework for the nasal cavity, and it also functions as an expansive basis for the developing facial skull. In adult animals, its ossified parts form the fragile ethmoid bone. The structure of the nasal capsule is determined on the one hand by the spatial requirements of the orbits and of the nasal cavity (with respiratory and olfactory components), and on the other hand by the biomechanical properties of the chewing apparatus. The interaction of these heterogeneous factors results in complex, species-specific compromises. Primates are characterized by a gradual reduction of their olfactory system throughout evolution and by binocular vision. Their chewing apparatus shows constructional adaptations to a varying herbivorous diet. Viewed within a phylogenetic-systematic framework, primate evolution may be taken as a natural experiment that demonstrates the influence of various factors on a complex structural system such as the nasal and facial skeleton.