Ultralow-voltage boron-doped diamond field emitter vacuum diode

A boron-doped diamond field emitter diode with ultralow turn-on voltage and high emission current is reported. The diamond field emitter diode structure with a built-in cap was fabricated using molds and electrostatic bonding techniques. The emission current versus anode voltage of the capped diamond emitter diode with boron doping, sp² content, and vacuum thermal electric (VTE) treatment shows a very low turn-on voltage of 2 V. A high emission current of 1 μA at an anode voltage of less than 10 V can be obtained from a single diamond tip. The turn-on voltage is significantly lower than comparable silicon field emitters     

Integrins and inside-out signal transduction: converging signals from PKC and PIP3

Recent studies have identified molecules that interact with integrins and appear to participate in the signaling pathways that regulate integrin adhesiveness. Clues provided by studies of these molecules point to the integration by integrins of signal transduction pathways implicated in cell division and activation.     

Synthesis and characterization of molybdenum disulphide formed from ammonium tetrathiomolybdate

An investigation has been carried out into the possibility of in situ formation of MoS2 within porous anodic films on aluminium, to improve subsequent tribological behaviour, by re-anodizing in thiomolybdate electrolyte. Acidification of thiomolybdate was employed to simulate the conditions for formation of the sulphide at the anodic film/electrolyte interface, followed by appropriate vacuum heat treatments to study possible temperature effects on the sulphide due to either friction or Joule heating during anodizing. The products of both acidification and heat treatment, characterized by X-ray powder diffraction and scanning electron microscopy, were compared with those formed by direct thermal decomposition of ammonium tetrathiomolybdate crystals. The precipitate formed by acidification was mainly amorphous molybdenum trisulphide (MoS3), which on heat treatment at 450 and 850°C yielded 3R-MoS2. 3R-MoS2 also formed by the thermal decomposition of thiomolybdate crystals. Thermogravimetric and differential thermal analyses showed that the decomposition of MoS3 to MoS2 occurred in the range 220–370°C and revealed the sequence of reaction steps. The findings suggest that mainly amorphous MoS3 is formed as a consequence of changes in the pH of the film/electrolyte interface during re-anodizing but the product is relatively easily transformed to crystalline MoS2 on moderate heating which may occur during wear processes.     

A novel method for elimination of line-current harmonics insingle-stage PFC switching regulators

This paper studies a particular single-stage power-factor-correction (PFC) switching regulator employing a discontinuous-conduction-mode (DCM) boost-input cell and a continuous-current-mode (CCM) forward output cell. Although this single-stage PFC regulator can provide a reasonably high power factor when its PFC stage is operating in discontinuous mode, substantial reduction in line-current harmonics is possible by applying a suitable frequency-modulation scheme. This paper derives a frequency-modulation scheme and proposes a practical implementation using a simple translinear analog circuit. A quantitative analysis on the total harmonic distortion (THD) of the line current when the circuit is subject to a limited range of frequency variations is presented along with some considerations for practical design. Experimental data obtained from a prototype confirms the effectiveness of the proposed frequency-modulation scheme. The proposed analog translinear circuit allows custom integrated circuit implementation, making it a viable low-cost solution to the elimination of line-current harmonics in switching regulators     

A Biologically-Parameterized Feather Model

Feathers, unlike other cutaneous appendages such as hair, fur, or scales have a definite structure. Variation in feather structure creates a wide range of resulting appearances. Collectively, feather structure determines the appearance of the feather coat, which can largely affect the resulting look of a feathered object (bird). In this paper we define the structure of individual feathers using a parameterization based on biological structure and substructures of actual feathers. We show that our parameterization can generate a large variety of feathers at multiple levels of detail and provide an initial step to semi‐automatically generating a wide range of feather coats. his is achieved by specifying an intuitive interpolation between different structures and ages of feathers.     

Far-infrared pump-probe measurement of the lifetime of the 2p−1 shallow donor level in n-GaAs

The low temperature lifetime of electrons excited in the 2p^?1 donor level of n-GaAs has been studied in a far-infrared pump-probe experiment. The measurement has been carried out using a pulsed far-infrared molecular gas laser working at a wavelength of 292µm, with the sample in a magnetic field of 5.1 T, resonant with the 1s_o?2p^?1 transition. Two FIR pulses are sliced from one FIR-laser pulse by means of optical switching techniques using two Q-switched Nd:YAG lasers. The first pulse is used to saturate the transition, while the second pulse probes the return of the population in the excited state towards thermal equilibrium as a function of the time delay after the excitation pulse. The value of 350±50 ns found for the lifetime falls in line with CW saturation results on materials with other doping concentrations.     

A novel double-circuit-rotor balanced induction motor for improvedslip-energy recovery drive performance. I. Modeling and simulation

A new construction for the rotor windings of balanced wound-rotor induction motors employed in the slip energy recovery drives is proposed, in this paper, to reduce the time harmonics which are commonly generated in the machine. The proposed machine has a double-circuit in the rotor. One circuit is star connected while the other is delta connected. Each of these two circuits is connected to a diode-bridge rectifier to achieve a twelve-pulse operation characteristics. The main objective of this paper is to develop a new model which is capable of simulating the proposed machine, neglecting nonlinearities due to magnetic saturation, and its associated converters. Such a model is further complicated due to the presence of the two rotor circuits and their mutual interaction     

Evaluating design metrics on large-scale software

Design-quality metrics that are being developed for predicting the potential quality and complexity of the system being developed are discussed. The goal of the metrics is to provide timely design information that can guide a developer in producing a higher quality product. The metrics were tested on projects developed in a university setting with client partners in industry. To further validate the metrics, they were applied to professionally developed systems to test their predictive qualities. The results of applying two design metrics and a composite metric to data from a large-scale industrial project are presented