Immigrants and health: unemployment and health-risks of labour migrants in the Federal Republic of Germany, 1984-1992

This article presents a longitudinal study of employment, unemployment and health of migrant workers in Germany. The analyses were conducted with longitudinal samples of the waves 1-6 (1984-1989) and the waves 6-9 (1989-1992) of the German Socio-Economic Panel (GSOEP). German and migrant workers did not respect to their health satisfaction but unemployed foreign workers were quite less satisfied with their health than unemployed Germans. This corresponded with a high percentage of foreign unemployed (30-50%) who felt chronically ill. A further examination of two (dichotomously formulated) principal investigation hypotheses could not show that the data support the explanation that the poorer health of unemployed migrants was caused by the unemployment situation. The results are interpreted in the way that the unemployed migrants' poorer health can be explained with (health) selection processes in the labour market.     

Reduction of loading effect by tungsten etchback in a magneticallyenhanced reactive ion etcher

The plug loading effect occurring during the etchback of tungsten was investigated in a magnetically enhanced reactive ion etcher using SF ₆/Ar mixtures. It was found that while the plug loading effect is independent of varying SF₆/Ar flow rate ratio and magnetic field intensity, it is reduced under the condition of high selectivity of tungsten relative to TiN which was achieved at high chamber pressure and low RF power. It is proposed that when TiN is used as a glue layer, the W etch rate enhancement in the plug is mainly controlled by a local loading effect. Under the optimized etchback conditions the plug loss was successfully controlled without the tungsten residue left on severe topology     

Jitter reduction through feedback for picosecond pulsed InGaAsPlasers

Following a comparison of picosecond-pulse generation techniques, feedback schemes are reported for the generation of picosecond pulse trains with improved jitter for both multicontact and conventional single-contact InGaAsP-InP lasers. Subpicosecond jitter is achieved for Q-switched laser sources using a novel optoelectronic feedback scheme. The use of resonant electrical feedback is shown to improve the timing jitter of gain-switched pulses by up to six times. Pulse-to-pulse timing jitter as low as 250 fs is demonstrated for a hybrid of optical and electrical feedback schemes. Limits for timing jitter in diode lasers are established for optoelectronic, electrical, and optical feedback schemes, and the key picosecond pulse generation schemes are compared in terms of timing jitter for the first time     

Growth structure investigation of MgF2 and NdF3 films grown by molecular beam deposition on CaF2(111) substrates

The growth structure of MgF₂ and NdF₃ films grown on polished CaF₂(111) substrates deposited by molecular beam deposition has been investigated using transmission electron microscopy (TEM) of microfractographical and surface replications as well as cross-sectional TEM, atomic force microscopy, packing density, and absorption measurements. It has been shown that by taking advantage of ultrahigh vacuum environments and a special stratification property of MgF₂ and NdF₃ films, the preparation of nanocrystalline films of high packing density and low optical absorption is possible at a substrate temperature of 425 K.     

Degradation of NiCr/CuNiMn/NiCr films on alumina substrates

This paper addresses the aging behaviour of NiCr/CuNiMn/NiCr triple layers on Al₂O₃ ceramics at temperatures up to 200°C for film thicknesses d0.5 μm. Investigations of the film structure and the increase of resistance and its temperature coefficient during the annealing process and studies of the dependence of this aging drift on both the film thickness and the storage temperature have been carried out. Furthermore, the film stress and the effect of substrate bending on resistance have been measured. The results can be explained by the irregular film structure (columns and small bridges between them), which causes stress and current concentrations as well as local creeping, cracking and oxidation processes in the micro-bridges. They are compared with such for structurally homogeneous films on silicon wafers.     

Silicon-substrate microelectrode arrays for parallel recording ofneural activity in peripheral and cranial nerves

A new process for the fabrication of regeneration microelectrode arrays for peripheral and cranial nerve applications is presented. This type of array is implanted between the severed ends of nerves, the axons of which regenerate through via holes in the silicon and are thereafter held fixed with respect to the microelectrodes. The process described is designed for compatibility with industry-standard CMOS or BiCMOS processes (it does not involve high-temperature process steps nor heavily-doped etch-stop layers), and provides a thin membrane for the via holes, surrounded by a thick silicon supporting rim. Many basic questions remain regarding the optimum via hole and microelectrode geometries in terms of both biological and electrical performance of the implants, and therefore passive versions were fabricated as tools for addressing these issues in on-going work. Versions of the devices were implanted in the rat peroneal nerve and in the frog auditory nerve. In both cases, regeneration was verified histologically and it was observed that the regenerated nerves had reorganized into microfascicles containing both myelinated and unmyelinated axons and corresponding to the grid pattern of the via holes. These microelectrode arrays were shown to allow the recording of action potential signals in both the peripheral and cranial nerve settings, from several microelectrodes in parallel     

High dose intravenous immune globulins and plasma exchange in Guillain-Barré Syndrome

We report the effects of treatment with plasma-exchange (PE) and intravenous immune globulins (IVIg) in 36 out of 50 patients with Guillain-Barré syndrome (GBS) recruited by an incidence study in the Emilia-Romagna region of Italy. Comparison of the patients treated with PE and IVIg showed no significant differences in terms of effectiveness in improving the clinical course of GBS: at one month, respectively 11.1% and 25% had recovered, and 55.5% and 58.3% had improved by at least one grade. These results are in agreement with those of the Dutch GBS trial. No relapses were observed in either group. Moreover, our results showed no difference in clinical outcome at 1 and 3 months between the patients receiving only one therapy and those receiving two; a second cycle of therapy did not seem to improve the clinical course of the disease significantly. We conclude that PE and IVIg are both safe and effective therapies for GBS.     

Interactions of stimulus attributes, base rates, and feedback in recognition.

Continuous old-new recognition was studied in relation to 3 factors that have been relatively neglected in previous research-stimulus attributes, old-new base rates, and informative feedback following responses. Under all conditions, both hits and false alarms increased over trials and all measures of recognition depended strongly on stimulus properties, notably interitem similarity. In contrast to expectations based on earlier results, both hit and false-alarm levels proved independent of old-new base rate when tests were given without feedback; with feedback added, false-alarm rates tended to approach true old-stimulus base rates with some types of stimuli, though not with words. The findings are compatible, in general, with current composite-memory models and were predicted in detail by an array-similarity model deriving from categorization theory. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Machine learning in control of functional electrical stimulationsystems for locomotion

Two machine learning techniques were evaluated for automatic design of a rule-based control of functional electrical stimulation (FES) for locomotion of spinal cord injured humans. The task was to learn the invariant characteristics of the relationship between sensory information and the FES-control signal by using off-line supervised training. Sensory signals were recorded using pressure sensors installed in the insoles of a subject's shoes and goniometers attached across the joints of the affected leg. The FES-control consisted of pulses corresponding to time intervals when the subject pressed on the manual push-button to deliver the stimulation during FES-assisted ambulation. The machine learning techniques used were the adaptive logic network (ALN) and the inductive learning algorithm (IL). Results to date suggest that, given the same training data, the IL learned faster than the ALN while both performed the test rapidly. The generalization was estimated by measuring the test errors and it was better with an ALN, especially if past points were used to reflect the time dimension. Both techniques were able to predict future stimulation events. An advantage of the ALN over the IL was that ALN's can be retrained with new data without losing previously collected knowledge. The advantages of the IL over the ALN were that the IL produces small, explicit, comprehensible trees and that the relative importance of each sensory contribution can be quantified     

Microsurgical anterior decompression and internal fixation with iliac bone graft and titanium plates for treatment of cervical intervertebral disc herniation

42 cervical interbody fusions with iliac bone graft and titanium plate fixation were performed between October 1991 and March 1994. The mean follow up period in this study was 10.7 months. In 32 cases fusion was done for 1 and in 10 cases for 2 segments. 2 different types of plates were used. In 25 cases micro-osteosynthesis plates and screws with 2.7 mm diameter were used, and in 17 cases cervical H-plates and screws with 3.5 mm diameter. A favourable outcome was achieved in 31 of 42 cases (74%). Satisfactory pain relief was achieved in 90%. For radicular motor deficit good results were obtained in 84% and for cervical myelopathy in 54%. The 2 different types of plates showed a remarkable difference in the clinical outcome. The results were regarded favourable in 15 of 25 microplate fusions (60%) and in 16 of 17 H-plate fusions (94%). Compression of the bone graft was seen in 5 patients of the micro plate group, however, radiological signs for fusion were present in all 42 cases at follow up. Major surgical complications, damage to neural structures or neurological deterioration did not occur in this study. Plate fixation in cervical interbody fusions seems to be a safe procedure and may reduce graft related complications at the fusion site if the plates and screws are sufficiently well proportioned. A favourable impact upon the results for cervical interbody fusion might be expected and should be further investigated in a long term follow up study.