Role of chain symmetry and hydrogen bonding in segmented copolymers with monodisperse hard segments

Thermoplastic segmented polyurethane and polyurea copolymers whose monodisperse hard segments are based on only a single diisocyanate molecule are discussed. The solid-state structure-property behavior of these materials demonstrates that a proper selection of the level of symmetry and/or cohesiveness of the hard microdomains may allow elimination of the traditional requirement of chain extension to obtain melt processable segmented urethanes, and more specifically, urea copolymers with useful structural properties.     

Nanostructured polymer blends: Synthesis and structure

Nanostructured polymer blends prepared via anionic ring opening polymerizations of cyclic monomers in the presence of a pre-made polymer melt exhibit a number of special properties over traditional polymer blends and homopolymers. Here, we report on a simple and versatile method of in situ polymerization of macrocyclic carbonates in the presence of a maleic anhydride polypropylene (mPP) matrix and a surface-active compatibilizer (i.e. PC grafted onto a mPP backbone generated in situ) to yield a micro- and nanostructured polymer blends consisting of a polycarbonate (PC) minor phase, and a polypropylene (PP) major phase. By varying the processing conditions and concentration of the macrocyclic carbonate it was possible to reduce the size of the PC dispersions to an average minor diameter of 150 nm. NMR and TEM characterizations indicate that the PC dispersions do not influence crystal content in the PP phase. Overall, the results point to a simple strategy and versatile route to new polymeric materials with enhanced benefits.     

High Pressure Conductivity and Photoconductivity of Polyveratrole

Summary Electropolymerization of o-(CH₃O)₂C₆H₄ (Veratrole) in dry acetonitrile/tetrabutylammonium tetrafluoroborate at platinum electrode, yields a green polymeric conducting solid. As the pressure is increased, the material becomes more conductive, but sharp changes towards lower conductivity occur at 4.2 and 6.2 metric tons pressure, probably due to phase transitions. The photoconductivity shows an exponential increase as temperature is increased, but it shows reversible changes at 200 K, 225 K and 250 K during slow warming, also attributable to phase transitions. Photoconductivity of Polyveratrole increases with the radiation frequency, being higher under blue light than under red of infrared radiation and there is a linear increase of photoconductivity with radiation density. Conductivity transients show that the conductivity increases exponentially with time to the saturation point within few minutes, and it also decreases exponentially when the light is turned off and the circuit is open. This behaviour can be explained by formation and encounter of electron and hole as current carriers. A preliminary study indicates a piezoelectric effect for the material. absorption spectroscopy allowed the measurements of the material band gap.     

Second-harmonic generation in GaAs-based quantum-cascade lasers grown on <100> substrates

Emission of coherent light at 5.1 /spl mu/m wavelength from GaAs-based quantum cascade lasers is reported. This was achieved by integrating nonlinear cascades with large second-order susceptibility in the active regions of the laser.     

Design and practical implementation of multifrequency RF front ends using direct RF sampling

The use of direct RF sampling has been explored as a means of designing multifrequency RF front ends. Such front ends will be useful to multifrequency RF applications such as global navigation satellite system receivers that use global positioning system (GPS) L1, L2, and L5 signals and Galileo signals. The design of a practical multifrequency direct RF sampling front end is dependent on having an analog-to-digital converter whose input bandwidth accommodates the highest carrier frequency and whose maximum sampling frequency is more than twice the cumulative bandwidth about the multiple carrier signals. The principle of direct RF sampling is used to alias all frequency bands of interest onto portions of the Nyquist bandwidth that do not overlap. This paper presents a new algorithm that finds the minimum sampling frequency that avoids overlap. This design approach requires a multifrequency bandpass filter for the frequency bands of interest. A prototype front end has been designed, built, and tested. It receives a GPS coarse/acquisition code at the L1 frequency and GPS antispoofing precision code at both L1 and L2. Dual-frequency signals with received carrier-to-noise ratios in excess of 52 dB-Hz have been acquired and tracked using this system.     

Optimal design and manufacture of thin‐walled polystyrene structures

In this study, we investigated the implementation of an automatic procedure for optimizing thermoformed thin‐walled structures. Such objects are created in great numbers, especially in the food packaging industry. The methodology for the optimal design of such structures is based on the use of a parameterized geometry model created within an interactive design environment. By varying the parameters associated with the computer‐aided design (CAD) model, one can create a rich variety of possible designs. One can then subject these designs to physical analysis to calculate their physical properties, and thus select an optimal design. The two distinct stages of this process—the prediction of the shape of the thermoformed structure, and the physical behavior of the structure—were validated by experiments. This article reports the experimental investigation of the deformation behavior of polystyrene, the mechanical behavior of specially prepared deformed polystyrene sheets, and the response to loading of a hemispherical structure (used in the validation). POLYM. ENG. SCI., 45:694–703, 2005. © 2005 Society of Plastics Engineers     

Dynamics of plastic polygonal plates with rounded corners

A method of calculating the dynamic deflection of rigidly plastic plates resting on a viscoelastic bed with complex piecewise-smooth support contours composed of sections of straight lines and circles under impact and explosion loading is presented. The general solution, which includes previously known partial solutions for circular and polygonal plates, is obtained. The results of calculation of the deflection of a square hinge-supported plate with rounded corners are presented for the case of the presence and absence of a plastic base.Translated from Problemy Prochnosti, No. 9, pp. 62–66, September, 1991.     

Financial Analysis and Marketing Strategy

A combination of concept (the product portfolio and the product life cycle) and empirical research (the PIMS study) can aid in clarifying the key issues involved in the selection of a firm's core strategies. Strategy control is multistage: periodic re-evaluation of strategy alternatives by use of the marketing audit; an analytical framework for control of chosen strategies by breaking down components and reporting their performance variances; and 'marketing segment' analysis for control of the detailed marketing plan.?