Measurements of single chain form factors by small-angle neutron scattering from polystyrene blends containing high concentrations of labelled molecules

A series of small angle neutron scattering measurements on blends of normal polystyrene (PSH) and labelled (deuterated) polystyrene (PSD) have been made with concentrations of PSD from 5 to 50 mol %. It is shown that the single chain form factor of the polymer in bulk can be obtained from a single concentration measurement for any concentration of labelled molecules, providing the molecular weights of the parent and labelled molecules are the same and the molecular weight distributions are narrow.     

Attraction of moth species of Tortricidae,Gelechiidae, Geometridae,Drepanidae, Pyralidae,and Gracillariidae families to field traps baited with conjugated dienes

Field surveys of a series of conjugated diunsaturated straight-chain primary alcohols, acetates, and aldehydes (dienes), including the 3,5-dode-cadienyl, 8,10-dodecadienyl, 3,5-tetradecadienyl, 8,10-tetradecadienyl, 9,11-tetradecadienyl, and 10,12-tetradecadienyl primary alcohols, acetates, and most aldehydes, and the related monounsaturated straight-chain primary alcohols, acetates, and aldehydes (monoenes), including the 3-dodecadienyl alcohol and acetates, attracted the following species from the title families. Diene attractants have been demonstrated for at least onePhyllonorycter sp.,Chionodes lugubrella (Fabr.),Leptostales ferruminaria (Zell.),Drepana bilineata (Pack.),Pyrausta fodinalis (Led.),Notocelia purpurissatana Heinr.,Phaneta alterana Heinr. Monoene attractants were demonstrated forHedya separatana (Kft.),Cydia fletcherana (Kft.),Barbara mappana Free.,Ancylis burgessiana (Zell.),Ancylis nubeculana Clem.,Evippe prunifoliella Cham.,Phlyctaenia coronata tertialis (Gn.), aChionodes sp., a Gelechiidae sp., and an unidentifiedPhyllonorycter sp. Replicated field experiments showed attraction-inhibition relationships for most species. Electroantennagram data are presented forLeptostales ferruminaria andDrepana bilineata.     

Polymeric schiff's base chelates and their precursors 8a), some cobalt chelates as catalysts for the isomerization of quadrycyclane to norbornadiene

Summary Starting with Z-2, 3-diamino-2-butenedinitrile as diamine component the synthesis of the low molecular N,N,O,O-chelate 3.Co and its ligand 3 is optimized. An easy synthesis of the chelate 8.Co covalently bound on macroreticular resins is presented. The chelates 8.Co are the most active heterogenous catalysts for the valence isomerization of quadricyclane to norbornadiene today.     

Determination of naphthalene-2,3-dicarboxaldehyde-labeled amino acids by open tubular liquid chromatography with electrochemical detection

Naphthalene-2,3-dicarboxaldehyde (NDA) has been investigated as a new derivatizing reagent for the electrochemical detection of tagged amino acids. Gradient elution allowed for the separation of 18 NDA-derivatized amino acids on an open tubular liquid chromatography column in less than 50 min. Gradient elution and electrochemical detection were found to be compatible. A detection limit of 36 amol was obtained for the asparagine-NDA derivative. The usefulness of this technique for quantitation was demonstrated by the analysis of the NDA-tagged hydrolysis products from bovine chymotrypsinogen.     

ISDN: A Global Solution to Transmission Needs

The concept of the integrated services digital network (ISDN) could revolutionize information management. The purpose of the ISDN is to provide a worldwide network that offers end-to-end digital connectivity supporting a wide variety of communications services. ISDN subscribers will have direct access to a high-speed digital pipeline capable of supporting simultaneous voice, data, facsimile, and various other services and calling features.     

Driver detection and recognition of lineside signals and signs at different approach speeds

A study was carried out using simulation to investigate driver responses to lineside signals and signs at various approach speeds. The objectives of the study were: (1) to find out whether train speed would significantly affect signal/sign reading; (2) to examine at which point certain types of signs or signals could be detected or recognised, and (3) to determine a speed cut-off level above which certain types of signs or signals are no longer recognisable or detectable. Fifty-seven train drivers from 12 Train Operating Companies in the UK participated in the trials. Twenty different types of lineside signs and ten types of signals were tested under six different approach speeds ranging from 100 to 350 km/h (62–218 mph). Driver performance measures were ‘time remaining to the signal/sign’ at the point of detection or recognition, and reading error rate. The results showed a significant influence of train speed on driver responses to lineside signals/signs and demonstrated a non-linear relationship between driver responses to signals/signs and approach speed. This has been used to estimate a maximum approach speed limit within which a specific signal or sign can be correctly detected or recognised. The findings and implications of the study are discussed in the paper.     

Reliability prediction models to support conceptual design

During the early stages of conceptual design, the ability to predict reliability is very limited. Without a prototype to test in a lab environment or without field data, component failure rates and system reliability performance are usually unknown. A popular method for early reliability prediction is to develop a computer model for the system. However, most of these models are extremely specific to an individual system or industry. This paper presents three general procedures (using both simulation and analytic solution techniques) for predicting system reliability and average mission cost. The procedures consider both known and unknown failure rates and component-level and subsystem-level analyzes. The estimates are based on the number of series subsystems and redundant (active or stand-by) components for each subsystem. The result is a set of approaches that engineers can use to predict system reliability early in the system-design process. Software was developed (and is discussed in this paper) that facilitates the application of the simulation-based techniques. For the specific type of system and mission addressed in this paper, the analytic approach is superior to the simulation-based prediction models. However, all three approaches are presented for two reasons: (1) to convey the development process involved with building these prediction tools; and (2) the simulation-based approaches are of greater value as the research is extended to consider more complex systems and scenarios     

用仿真工具优化车辆动力系统(一)

在本文的第一部分，介绍了一种理想的车辆动力系统的计算机辅助开发过程。它显示了现代仿真技术在产品持续发展过程中的作用，该技术采用硬件回路作非在线的仿真，并通过现代化的试验手段对车辆进行匹配。特别重要的是提供了将电控变速器和发动机控制单元综合的可能性。接着是在线仿真在诸如发动机和变速器模式方面的应用和发展，它是上述开发过程的基础。根据上述的方法论，本文论述了仿真技术已取得的成绩和将来的应用可能性。     

High-Frequency Variations in the Rotation of the Earth

We report here observational results demonstrating that a three-station network of properly distributed VLBI observatories can routinely determine UT1 with a formal standard error of ±0.05 ms of time, in an observing period of 24 h. We also report the results of a three-month series of daily observing sessions of only 1-h duration with a single interferometer, which produced estimates of UT1 with standard errors of ±0.1 ms. The UT1 values obtained from the 1-h observing sessions track smoothly between the points of the 24-h time series, and the combined time series shows that it is not unusual for UT1 to vary by 1-2 ms in periods of several days. Preliminary results of reprocessing the 24-h observing sessions in 2-h segments suggest that variations of 0.4 ms may occur on time scales of only 6-8 h.