Wideband microstrip array antenna with sidelobe cancellationchannels

An antenna array for wideband operation (up to 70%) is presented. The structure has low windloading area and consists of parallel printed circuit boards (PCB) with microstrip dipoles, feed network and metal fences placed between the PCBs. The low profile, low weight antenna array forms the main beam and three difference patterns for sidelobe cancellation. Experimental results are compared with calculations for both microstrip dipole and array     

High-performance automatic target recognition through data-specificVLSI

Under the Mojave configurable computing project, we have developed a system for achieving high performance on an automatic target recognition (ATR) application through the use of configurable computing technology. The ATR system studied here involves real-time image acquisition from a synthetic aperture radar (SAR). SAR images exhibit statistical properties which can be used to improve system performance. In this paper, the Mojave configurable computing system uses field programmable gate arrays (FPGA's) to implement highly specialized circuits while retaining the flexibility of programmable components. A controller sequences through a set of specialized circuits in response to real-time events. Computer-aided design (CAD) tools have been developed to support the automatic generation of these specialized circuits. The resulting configurable computing system achieves a significant performance advantage over the existing solution, which is based on application specific integrated circuit (ASIC) technology     

Analysis of the deformation of polypropylene hot-tool butt welds

Thin microtomed samples from hot-tool butt welds of polypropylene pipes are subjected to uniaxial tensile stress using a specially built instrumented microtesting machine. The deformation of the interface between the weld and the bulk polymer is measured by an optical method. An analysis of these measurements is carried out using the finite element method, and contours of the effective stress are obtained. There is a steep stress gradient at the junction of the weld flash and the bulk polymer, although the stress concentration factor is relatively low. The stress is essentially constant in the bulk polymer apart from the region near the weld zone. Tests on samples without the weld flash show that the maximum stress occurs within the weld zone. This is consistent with long-term tests on larger samples, where the fracture is found to initiate within the weld. The method of analysis enables the stress-strain response of the weld material to be determined.     

Inhibition of intratracheal lung cancer development by systemic delivery of E1A

Amplification or overexpression of HER-2/neu in human lung cancer has been correlated with poor prognosis and chemoresistance. We have previously reported that the adenovirus type 5 early region 1A (E1A) gene product can suppress HER-2/neu-mediated transformation phenotypes through inhibition of HER-2/neu expression. To find an efficient way to treat HER-2/neu-overexpressing lung cancer with E1A, a replication-deficient adenovirus containing the E1A gene, Ad.E1A(+), was used to transduce E1A into HER-2/neu-overexpressing and low expressing human lung cancer cell lines. Tumour cell growth in vitro and colony formation in soft agarose were greatly inhibited by Ad.E1A(+) transduction in HER-2/neu-overexpressing lung cancer cell lines. In HER-2/neu low expressing cell lines, E1A could not inhibit cell growth in vitro but could reduce the colony formation ability in soft agarose, indicating different effects of E1A in these two types of cancer cells. To test the therapeutic efficacy of E1A to lung cancer by systemic delivery in vivo, tumor-bearing mice were established by intratracheal injection of lung cancer cells and treated by i.v. tail injections of Ad.E1A(+). As a result, Ad.E1A(+) suppressed HER-2/neu overexpression and inhibited intratracheal lung cancer growth. However, no significant tumor suppression effect of Ad.E1A(+) was observed in mice bearing HER-2/neu low expressing cell line when the same therapeutic procedure was followed. Thus, we conclude that systemic delivery of Ad.E1A(+) can efficiently achieve therapeutic effect in HER-2/neu-overexpressing lung cancer in vivo.     

Control of stroma-dependent hematopoiesis by basic fibroblast growth factor: stromal phenotypic plasticity and modified myelopoietic functions

The immunological agglutination reactions of physically absorbed F(ab')2 molecules onto anionic and cationic latex particles have been investigated by means of optical absorbance measurements. These measurements have been conducted under different conditions to determine the most influential factors. Surface F(ab')2 and BSA densities, particle concentration in the reaction medium and polyethylene glycol concentration are some of these factors. Sensitized cationic and anionic latexes differ considerably with respect to their colloidal stability and reactivity. As a general rule, the sensitized cationic latex has a relatively higher colloidal stability and hence, it provides reagents with a better optical response. Less than 0.025 microgram/ml of C-reactive protein has been detected using this particle enhanced optical immunoassay.     

Position-sensitive superheated-liquid-droplet neutron dosimeter

The one-dimensional (1D) position-sensitive superheated-liquid-droplet dosimeter (SLDD) has been fabricated and tested in the laboratory. The 1D SLDD is fabricated from a 9.525-mm OD, 6.35-mm ID, 20-cm long, Plexiglas-walled tube filled with a mixture of superheated-liquid Freon droplets and host medium glycerol. Washer-shaped piezoelectric acoustic transducers are positioned at both ends of the tube; they determine the number and positions of the acoustic events when the superheated-liquid droplets evaporate upon neutron irradiation. The SLDD is irradiated with the ¹³⁷Cs and ⁶⁰Co γ-sources, as well as ²⁵²Cf neutron source to test for its radiation response and spatial resolution. The SLDD based on the Freon-134a superheated-liquid droplets operating at 20°C and 1 atm is found to be ideal for measuring absorbed neutron dose. This study also proves that the positions of the radiation-induced nucleation acoustic events can be linearly determined from the differences in the transmission times received by the acoustic transducers on the 1D SLDD. The spatial resolution of the neutron depth-dose is 1 mm due the finite response time (1 μs) of the piezoelectric acoustic transducers.     

Recent Developments in Equipment and Application of Ion Beam Assisted Thin Film Deposition

Ion beam assisted deposition (IBAD) of thin films is still a new technology with respect to the number of applications. A broader industrial application depends on the availability and versatility of facilities which are able to process various kinds of workpieces under appropriate conditions. Recently, IBAD facilities of the second generation were described in literature and are partially commercially available. In the present report such IBAD machines with their special features such as number and kind of ion sources and evaporators are described. Particularly, the set-up of the ALLIGATOR, a versatile IBAD device for coating complex workpieces under ion bombardment with a broad range of ion energies, is described. As an application example, recent results on the treatment of medical implants are discussed. In -vivo tests of coated cardiovascular stents showed that the deposited noble metal films were effective in influencing the corrosivity and thromboresistance of the implant     

Switched-current memory circuits for high-precision applications

We discuss circuit parameters that limit the precision of basic dynamic current-memory cells. In addition to analyzing current-copying errors caused by the finite output conductances of the current sources and by the clock-feedthrough (CFT) of the feedback switches, we analyze the noise performance of the basic memory cell. To reduce CFT and noise, we propose a novel circuit based on Miller capacitance-enhancement. Measurement results of memory cells integrated in a 1-μm CMOS process confirm the theoretical findings; with our CFT and noise reduction technique based on Miller enhanced capacitance and dummy switches, we achieve a dynamic range of 11 b at clock frequencies greater than 100 kHz