Efficient diode-pumped single-frequency erbium:ytterbium fiberlaser

We report a 7.6-mW single-frequency fiber laser operating at 1545 nm, using for the first time an Er³⁺:Yb³⁺ doped fiber and a fiber grating output coupler. The laser did not exhibit self-pulsation, which is a typical problem in short three-level fiber lasers, and had a relative intensity noise (RIN) level below -145.5 dB/Hz at frequencies above 10 MHz. The linewidth of the laser was limited by the relaxation oscillation sidebands in the optical spectrum and was typically less than 1 MHz     

The effects of cholecystokinin A and B receptor antagonists, devazepide and L 365260, on citalopram-induced decrease of exploratory behaviour in rat

The present study has been divided into two sets. In the first set, the aim of the experiments was to investigate the dose-response effect of selective serotonin re-uptake inhibitor (SSRI) citalopram on rat exploratory behaviour in the elevated plus-maze. In the second set of experiments, the effect of cholecystokinin (CCK) CCKA and CCKB receptor antagonists, devazepide and L 365260, on citalopram-induced decrease of exploratory behaviour in the elevated plus-maze was studied. Citalopram (5 and 10 mg/kg) decreased the number of open and total arm entries, line crossings on open arms, and percentage of time spent exploring in open arm. Dose 15 mg/kg was without any effect on rat exploratory behaviour. Devazepide (0.01 and 1.0 mg/kg) failed to modify any of the citalopram-induced changes observed. L 365260 (1.0 mg/kg) reversed most of the effects of citalopram: the numbers of open and total arm entries, the number of line crossings, and the percentage of time spent exploring in open arms. L 365260 at dose level 0.01 mg/kg was ineffective. These results support the involvement of the CCKB receptor subtype in SSRI-induced anxiogenic-like effects in rodents.     

Modeling ion implantation of HgCdTe

Ion implantation of boron is used to create n on p photodiodes in vacancy-doped mercury cadmium telluride (MC.T). The junction is formed by Hg interstitials from the implant damage region diffusing into the MC.T and annihilating Hg vacancies. The resultant doping profile is n⁺/n^-/p, where the n⁺ region is near the surface and roughly coincides with the implant damage, the n^- region is where Hg vacancies have been annihilated revealing a residual grown-in donor, and the p region remains doped by Hg vacancy double acceptors. We have recently developed a new process modeling tool for simulating junction formation in MC.T by ion implantation. The interstitial source in the damage region is represented by stored interstitials whose distribution depends on the implant dose. These interstitials are released into the bulk at a constant, user defined rate. Once released, they diffuse away from the damage region and annihilate any Hg vacancies they encounter. In this paper, we present results of simulations using this tool and show how it can be used to quantitatively analyze the effects of variations in processing conditions, including implant dose, annealing temperature, and doping background.     

Poly(A) metabolism in Xenopus laevis embryos: substrate-specific and default poly(A) nuclease activities are mediated by two distinct complexes

The metabolism of the poly(A) tail is a process important for the translational regulation of maternal mRNAs in Xenopus laevis oocytes and early embryos. Two poly(A) nuclease (PAN) activities have been described in Xenopus embryo or activated egg extracts (Legagneux et al (1995) RNA 1, 1001-1008). These activities (default PAN and EgPAN) are distinguishable by their deadenylation kinetics and their substrate specificities. In this report, we show that these activities display different sensitivities to biochemical treatments. Urea and, to a lesser extent, spermidine, inhibit EgPAN at concentrations which have no effect on default PAN. Heparin activates default PAN but inhibits EgPAN. When extracts are fractionated by ultracentrifugation, the default activity is recovered in one unique fraction, whereas two fractions must be combined to reconstitute the EgPAN activity. Moreover, these two deadenylation activities are separable by size exclusion chromatography under native conditions. We conclude that these two deadenylation activities are mediated by two protein complexes.     

Control of stroma-dependent hematopoiesis by basic fibroblast growth factor: stromal phenotypic plasticity and modified myelopoietic functions

The immunological agglutination reactions of physically absorbed F(ab')2 molecules onto anionic and cationic latex particles have been investigated by means of optical absorbance measurements. These measurements have been conducted under different conditions to determine the most influential factors. Surface F(ab')2 and BSA densities, particle concentration in the reaction medium and polyethylene glycol concentration are some of these factors. Sensitized cationic and anionic latexes differ considerably with respect to their colloidal stability and reactivity. As a general rule, the sensitized cationic latex has a relatively higher colloidal stability and hence, it provides reagents with a better optical response. Less than 0.025 microgram/ml of C-reactive protein has been detected using this particle enhanced optical immunoassay.     

Increasing the service properties of weld joints by electrohydroimpulse treatment

Known examples of the positive influence of electrohydroimpulse treatment on the quality of weld joints of various steels, particularly including an increase in their long-term and cyclic strength and also corrosion resistance, are analyzed. It is shown that in this case there is a reduction in residual macro- and micro-stresses and also a change in the parameters of the dislocation structure of the joint metal in the direction of stabilization of it.Translated from Problemy Prochnosti, No. 4, pp. 119–123, April, 1996.     

Position-sensitive superheated-liquid-droplet neutron dosimeter

The one-dimensional (1D) position-sensitive superheated-liquid-droplet dosimeter (SLDD) has been fabricated and tested in the laboratory. The 1D SLDD is fabricated from a 9.525-mm OD, 6.35-mm ID, 20-cm long, Plexiglas-walled tube filled with a mixture of superheated-liquid Freon droplets and host medium glycerol. Washer-shaped piezoelectric acoustic transducers are positioned at both ends of the tube; they determine the number and positions of the acoustic events when the superheated-liquid droplets evaporate upon neutron irradiation. The SLDD is irradiated with the ¹³⁷Cs and ⁶⁰Co γ-sources, as well as ²⁵²Cf neutron source to test for its radiation response and spatial resolution. The SLDD based on the Freon-134a superheated-liquid droplets operating at 20°C and 1 atm is found to be ideal for measuring absorbed neutron dose. This study also proves that the positions of the radiation-induced nucleation acoustic events can be linearly determined from the differences in the transmission times received by the acoustic transducers on the 1D SLDD. The spatial resolution of the neutron depth-dose is 1 mm due the finite response time (1 μs) of the piezoelectric acoustic transducers.     

20-nm optical wavelength conversion using nondegenerate four-wavemixing

Wavelength conversion of optical signals over 20 nm is demonstrated using highly nondegenerate four-wave mixing in a semiconductor traveling-wave optical amplifier. This technique has the potential for extremely-high-speed operation and allows continuous tuning of both input and output wavelengths over the amplifier gain bandwidth. It is demonstrated that, even for such a large wavelength conversion range, it is possible to obtain conversion efficiencies in excess of -10 dB and high extinction ratios. The feasibility of the technique is demonstrated by system measurements at 622 Mb/s, showing a 1.1-dB power penalty at 10^-9 bit error rate (BER)     

Recent Developments in Equipment and Application of Ion Beam Assisted Thin Film Deposition

Ion beam assisted deposition (IBAD) of thin films is still a new technology with respect to the number of applications. A broader industrial application depends on the availability and versatility of facilities which are able to process various kinds of workpieces under appropriate conditions. Recently, IBAD facilities of the second generation were described in literature and are partially commercially available. In the present report such IBAD machines with their special features such as number and kind of ion sources and evaporators are described. Particularly, the set-up of the ALLIGATOR, a versatile IBAD device for coating complex workpieces under ion bombardment with a broad range of ion energies, is described. As an application example, recent results on the treatment of medical implants are discussed. In -vivo tests of coated cardiovascular stents showed that the deposited noble metal films were effective in influencing the corrosivity and thromboresistance of the implant     

Teaching Design to Freshmen: Style and Content

This paper describe a freshman course in engineering design that stresses the open-ended and ill-structured nature of design in a project-based context. The projects are chosen in part for their social context and utility. The projects are supplemented by lectures on design methodology and other topics related to engineering practice. Among the deliverables required of the students are proposals, progress reports, and written and oral presentations—the latter to an external design jury as part of a design competition.