Application of a glyphosate-based herbicide to Phragmites australis: Impact on groundwater and near-shore lake water at a beach on Georgian Bay

During the past decade, the invasive Phragmites australis (common reed) has established itself along beaches of the Great Lakes, causing detrimental impacts to both the natural ecological integrity of the shoreline and the recreational value of beaches. The herbicide Roundup®, containing the active ingredient glyphosate, was applied to Phragmites along a beach on the southern shore of Georgian Bay, Canada, to eradicate the Phragmites which was destroying the natural beach ecosystem. Groundwater and lake water were tested to determine if glyphosate enters the groundwater and lake at the beach and how long glyphosate will persist. Two days after application, the geometric mean concentration of glyphosate in the groundwater below the Phragmites was 0.060 μg/L with a maximum of 12.50 μg/L. Concentrations rapidly declined over the next two to three weeks to below minimum detection limits (< 0.020 μg/L). Glyphosate was also detected in the nearshore lake water with concentrations peaking at a geometric mean of 0.14 μg/L one week after application, and declining to 0.039 μg/L four weeks after application. Concentrations of glyphosate never exceeded the Canadian water quality guideline for the protection of aquatic life (65 μg/L) in either the groundwater or lake water. An approximate half-life for the dissipation of glyphosate by degradation and dilution/flushing as groundwater flows toward the lake, assuming a first order kinetic reaction, yielded a half-life of 3.5 during the 4 weeks after the herbicide was applied. The application of Roundup® resulted in an 90% reduction in the size of the stand of Phragmites.     

Security through diversity: moving from rhetoric to practice

In response to a range of contemporary urban water challenges, there is an increasingly urgent need to change the way water is used in our cities. In Australia, the 'Security through Diversity' policy has been introduced in a number of cities to help facilitate a shift towards sustainable urban water management. This qualitative case study research investigated the interpretation and implementation of this radically different urban water policy approach across the case study cities of Perth and Melbourne. To focus the research and allow for more reliable comparative analysis across the cities, the introduction of desalination and permanent water saving rules as new initiatives in these cities were of particular interest. The research results are drawn from a synthesis of over 65 semi-structured interviews with senior urban water practitioners in the case study cities, and a content analysis of key policy and guidance documents, as well as organizational literature where available. The key finding of this research was that because of an entrenched technological paradigm, and the difficulty in breaking this pattern of lock-in, practitioners are currently interpreting and implementing Security through Diversity in a way that does not fully realise the potential of this strategy. More specifically the interview results revealed that the urban water practitioner community believed that the introduction of seawater desalination would discharge their city's responsibility for achieving Security through Diversity and that demand management initiatives, while nice, are not essential to this policy position. Interestingly, despite context evidence to the contrary, the practitioners believed supply and demand planning to be an integrated practice within their city. The paper concludes by offering some recommendations to facilitate a more comprehensive implementation of Security through Diversity and outlines areas for possible future research.     

Working towards sustainable urban water management: the vulnerability blind spot

The unprecedented water scarcity in Australia coincides with the adoption of a new urban water rhetoric. The 'Security through Diversity' strategy has been adopted in a number of Australian cities as a new and innovative approach to urban water management. Although this strategy offers a more holistic approach to urban water management, in practice, the Security through Diversity strategy is largely being interpreted and implemented in a way that maintains the historical dependence on large scale, centralised water infrastructure and therefore perpetuates existing urban water vulnerabilities. This research explores the implementation of Security through Diversity as the new water scarcity response strategy in the cities of Perth and Melbourne. Through a qualitative study with over sixty-five urban water practitioners, the results reveal that the practitioners have absorbed the new Security through Diversity language whilst maintaining the existing problem and solution framework for urban water management. This can be explained in terms of an entrenched technological path dependency and cognitive lock-in that is preventing practitioners from more comprehensively engaging with the complexities of the Security through Diversity strategy, which is ultimately perpetuating the existing vulnerability of our cities. This paper suggests that greater engagement with the underlying purpose of the security though diversity strategy is a necessary first step to overcome the constraints of the traditional technological paradigm and more effectively reduce the continued vulnerability of Australian cities.     

Sensitivity analysis for the SimpleTreat model to simulate fate of chemicals in sewage treatment plants

SimpleTreat 3.1 predicts the distribution and elimination of chemicals by sewage treatment. The model is used as the default calculation in EUSES 2.0 to estimate exposure concentration in the receiving water, soil and air. A sensitivity analysis was performed to rank input parameters according to their influence on model predictions. Triclosan was selected for the base case. The sewage flow, degradation rates and parameters describing the raw sewage were shown to be the most sensitive inputs. The pH and dissociation constant are very sensitive parameters when working with ionisable compounds. Variation in certain input parameters was propagated through the model to yield greater variation in output parameters with a maximum ratio of 4.0. SimpleTreat 3.1 is a steady state model describing a highly non-steady system. A large variability in the most sensitive parameters is expected within a single sewage plant and parameters should therefore be selected to cover this variability.     

Learning market prices in real-time supply chain management

This paper proposes a model for dynamic pricing that combines knowledge of production capacity and existing commitments, reasoning about uncertainty and learning of market conditions in an attempt to optimise expected profits. In particular, the market conditions are represented as a set of probabilities over the success rate of product prices, and those prices are learned online as the market develops. The dynamic pricing model is integrated into a real-time supply chain management agent using the Trading Agent Competition Supply Chain Management game as a test framework. We evaluate the agent experimentally in competition with other supply chain agents, and demonstrate the benefits of incorporating more market data into the dynamic pricing mechanism.     

Postural support strategies of disabled drivers and the effectiveness of postural support aids

The paper discusses a series of driving trials that were conducted to investigate postural stability of disabled drivers and to assess the effectiveness of a representative sample of support aids. Twenty-three disabled drivers with varying levels of physical disability and seven non disabled drivers participated in the study. The test car was equipped with transducers to measure vehicle velocity and acceleration (longitudinal and lateral), steering wheel movement and torque, and the bracing forces exerted by the driver on the steering wheel. Video cameras were installed to record postural support strategies and displacement of the driver and to record deviation of the car from the specified path. Subjective data regarding driver attitudes and acceptance were also collected through the administration of questionnaires. Findings from the study showed that support aids significantly improved driving performance and reduced physical exertion to maintain an upright driving position for disabled drivers. However, ergonomics design aspects regarding the ease of use and acceptance of the support aids by the end users were identified as obstacles to their sustained use in everyday driving.     

Physicochemical properties of calcific deposits isolated from porcine bioprosthetic heart valves removed from patients following 2-13 years function

The purpose of this study was to characterize the physicochemical properties of calcific deposits that cause the failure of tissue-derived heart valve bioprostheses. This was done in an effort to understand the mechanism of pathologic biomineralization in the cardiovascular system and potentially prevent deterioration of bioprostheses. Calcific deposits taken from 10 failed bioprosthetic valves that had been implanted in patients for 2-13 years were characterized by chemical analysis, x-ray diffraction, FTIR spectroscopy, scanning electron microscopy, polarized light microscopy, and solubility measurements. The combined results identified the biomineral as an apatitic calcium phosphate salt with substantial incorporation of sodium, magnesium and carbonate. The average Ca/PO4 ratio for this "young" pathologic biomineral was approximately 1.3, considerably lower than approximately 1.7 found in mature atherosclerotic plaque biomineral and mature skeletal biomineral, both of which approximate hydroxyapatite in composition. Deproteinated calcific deposits from bioprostheses had thermodynamic solubilities comparable to those of both atherosclerotic plaque, typical pathologic biomineral and hydrolyzed octacalcium phosphate (OCP, Ca4H(PO4)3 x 2.5 H2O), a proposed precursor phase to biomineral apatite. This later finding, together with chemical composition and structural details of the bioprosthetic deposits themselves, supports a mechanism of cardiovascular calcification in which OCP plays a crucial role in the formation of the final apatitic phase. This suggests an approach toward prevention of bioprosthetic tissue calcification through control of the formation of the kinetically favored OCP precursor and/or its transformation into bioapatite.     

Severity of delayed (“secondary”) cerebral energy failure after acute hypoxia-ischemia is related to the time integral of acute ATP depletion

The aim of this study was to reproduce the delayed (secondary) cerebral energy failure previously described in birth-asphyxiated newborn infants and to investigate relationships between primary insult severity and the extent of the delayed energy failure. Phosphorus (³¹P) magnetic resonance spectroscopy (MRS) at 7 T was used to study the brains of 12 newborn piglets during an acute, reversible, cerebral hypoxic-ischemic episode which continued until nucleotide triphosphates (NTP) were depleted. After reperfusion and reoxygenation, spectroscopy was continued for 48 h. High-energy metabolite concentrations returned to near normal levels after the insult, but later they fell as delayed energy failure developed. The time integral of NTP depletion in the primary insult correlated strongly with the minimum [phosphocreatine (PCr)]/[inorganic orthophosphate (P_i)] observed 24–48 h after the insult. (Linear regression analysis gave slope –8.04 h^–1; ordinate intercept=1.23;r=0.92;P<0.0001.) This model is currently being used to investigate the therapeutic potential of various cerebroprotective strategies including hypothermia.     

Relationships between subjective and objective assessments of stress at slaughter and meat quality in pigs

A study was carried out to relate subjective and objective measures of stress at slaughter and meat quality in pigs. Thirteen slaughter plants were visited. The systems used for handling the pigs pre-slaughter and the levels of stress experienced by the animals were subjectively assessed. The sound level immediately before stunning was also measured. Generally, systems that were rated as being most stressful also produced higher levels of sound, probably because of the vocalisations of the pigs. As the size of plant increased, there was a tendency for the level of stress, and the recorded sound level, to increase. This appeared to be because larger plants operated faster and were more likely to use restraining conveyors supplied by races to handle the animals before stunning. The restraint associated with these seems stressful to pigs. Five plants were selected for further study. Two had been assessed as having handling systems that produced a low level of stress in the pigs, one as having a system producing a medium level, and two as having poor systems producing high levels of stress. Blood samples were collected at exsanguination, and meat quality was assessed. As the level of subjectively assessed stress experienced by the pigs increased, so did the average blood levels of lactate and creatine phosphokinase (CPK). There was also a progressive increase in the potential incidence of pale, soft, exudative (PSE) and dark, firm, dry (DFD) meat in the plants using more stressful handling systems. Additionally, there were positive relationships between sound level and lactate and CPK, and sound level and indices of poorer meat quality. Cortisol concentrations were not different in pigs killed in the different systems and probably reflect events earlier in the handling process, such as in transport and lairage, rather than the stress experienced immediately before stunning. The overall conclusion was that subjective assessments of the stress suffered by pigs correlate well with objective measures and that higher stress levels are associated with poorer meat quality.