Evaluation of the Loading Characteristics of the EPA WINS PM2.5 Separator

The loading characteristics of the USEPA Well Impactor Ninety Six (WINS) PM_2.5 separator was an important design consideration during the separator's development. In recognition that all inertial separators eventually overload, the loading surface of the WINS was designed to be easily accessible, replaceable, and cleanable. Prior to promulgation of the method, the loading capacity of the WINS separator was evaluated by measuring its performance after repeated loading with laboratory-generated, high concentration, coarse-mode aerosol. For this purpose, a low flow rate loading wind tunnel was designed and constructed to artificially create coarse mode aerosols composed of Arizona Test Dust. This controlled test atmosphere was sampled by the PM_2.5 reference method sampling train, as specified in 40 CFR Part 50, Appendix L, at total aerosol mass concentrations averaging 332     

HE4 Transcription- and Splice Variants-Specific Expression in Endometrial Cancer and Correlation with Patient Survival

We investigated the HE4 variant-specific expression patterns in various normal tissues as well as in normal and malignant endometrial tissues. The relationships between mRNA variants and age, body weight, or survival are analyzed. ICAT-labeled normal and endometrial cancer (EC) tissues were analyzed with multidimensional liquid chromatography followed by tandem mass spectrometry. Levels of HE4 mRNA variants were measured by real-time PCR. Mean mRNA levels were compared among 16 normal endometrial samples, 14 grade 1 and 14 grade 3 endometrioid EC, 15 papillary serous EC, and 14 normal human tissue samples. The relationship between levels of HE4 variants and EC patient characteristics was analyzed with the use of Pearson correlation test. We found that, although all five HE4 mRNA variants are detectable in normal tissue samples, their expression is highly tissue-specific, with epididymis, trachea, breast and endometrium containing the highest levels. HE4-V0, -V1, and -V3 are the most abundant variants in both normal and malignant tissues. All variants are significantly increased in both endometrioid and papillary serous EC, with higher levels observed in grade 3 endometrioid EC. In the EC group, HE4-V1, -V3, and -V4 levels inversely correlate with EC patient survival, whereas HE4-V0 levels positively correlate with age. HE4 variants exhibit tissue-specific expression, suggesting that each variant may exert distinct functions in normal and malignant cells. HE4 levels appear to correlate with EC patient survival in a variant-specific manner. When using HE4 as a biomarker for EC management, the effects of age should be considered.     

Molecularly Targeted Agents as Radiosensitizers in Cancer Therapy—Focus on Prostate Cancer

As our understanding of the molecular pathways driving tumorigenesis improves and more druggable targets are identified, we have witnessed a concomitant increase in the development and production of novel molecularly targeted agents. Radiotherapy is commonly used in the treatment of various malignancies with a prominent role in the care of prostate cancer patients, and efforts to improve the therapeutic ratio of radiation by technologic and pharmacologic means have led to important advances in cancer care. One promising approach is to combine molecularly targeted systemic agents with radiotherapy to improve tumor response rates and likelihood of durable control. This review first explores the limitations of preclinical studies as well as barriers to successful implementation of clinical trials with radiosensitizers. Special considerations related to and recommendations for the design of preclinical studies and clinical trials involving molecularly targeted agents combined with radiotherapy are provided. We then apply these concepts by reviewing a representative set of targeted therapies that show promise as radiosensitizers in the treatment of prostate cancer.     

The influence of cure conditions on the morphology and phase distribution in a rubber-modified epoxy resin using scanning electron microscopy and atomic force microscopy

In this paper, we consider the effect of cure conditions on the morphology and distribution of the rubber in a phase separated rubber-modified epoxy resin, which in effect is a two phase composite. Novel aspects of this study were measuring the elastic modulus of the dispersed rubber phase particles by atomic force microscopy (AFM) and verifying the presence of nano-dispersed rubber.The purpose of introducing dispersed rubber particles into the primary phase in these systems is to enhance their toughness. It is known that both the rubber particle size and volume fraction affect the degree to which the epoxy is toughened. It is not known, however, how the specific mechanical properties of the rubber phase itself affect the toughness.The objectives of this study were to: (1) use scanning electron microscopy (SEM) and atomic force microscopy (AFM) to determine the morphology and phase distribution of the rubber particles and (2) to measure the mechanical properties of the rubber particles using AFM. Ultimately, we would like to develop a clear understanding of how the changes in morphology and mechanical properties measured at the micro and nano-scales affect both the elastic modulus and fracture toughness of rubber-modified epoxy polymers.The epoxy system consisted of a diglycidyl ether of bisphenol-A, Epon 828, cured with piperidine and incorporating a liquid carboxyl-terminated acrlonitrile-butadiene rubber (CTBN). The carboxyl groups of the rubber are capable of reacting with the epoxy. The cure conditions considered were based on a statistically designed full factorial curing matrix, with the variables selected being cure temperature, initiator (piperidine) concentration, and rubber acrylonitrile concentration.Each of these primary variables was found to affect the phase distribution that resulted during cure. A statistical analysis of the effect of these variables on the phase morphology showed that the acrylonitrile content (%) of the rubber affected both the rubber particle size and volume fraction. The cure temperature strongly influenced the rubber particle volume fraction and modulus. Volume fractions of the rubber phase of up to 24% were obtained even though the amount of rubber added was only 12.5%. The rubber particle modulus varied from 6.20 to 7.16 MPa. Both the volume fraction and modulus of the rubber particles were found to influence the macroscopic mechanical properties of the composite. While larger volume fractions favor improved toughness, we note that that the toughness is greatest when the particle modulus values do not exceed ∼6.2 MPa. Thus, increased volume fraction by itself may not always result in increased toughness. The particles also must be sufficiently ‘soft’ in order to improve toughness. In the system of interest here, the processing conditions are a key factor in achieving the most appropriate material properties. By inference, this is likely to be the case as well in other rubber-modified thermosets.     

Formation, densification, and selected mechanical properties of hot pressed Al4SiC4, Al4SiC4 with 30 vol.% WC, and Al4SiC4 with 30 vol.% TiC

Powders of Al₄C₃ and SiC were combined by high-energy milling to produce Al₄SiC₄, Al₄SiC₄ + 30 vol.% TiC, and Al₄SiC₄ + 30 vol.% WC. Five different temperatures were used to hot press the constituents. XRD, SEM, relative density, and hardness measurements showed that formation of single-phase Al₄SiC₄ occurred at 1450 °C and full densification (99%) was achieved at 1500 °C. Both of these temperatures are lower than previously reported. Adding TiC and WC increases hardness, while WC improves densification (99.5%).     

Combustion of oil palm stone in a pilot-scale fluidised bed reactor

Biomass is being generated in vast amounts from oil palm plantations particularly in developing countries such as Malaysia, Thailand and Indonesia. Oil palm stone (OPS) is currently considered a waste material and has not previously been considered for energy purposes. The main objective of this study was to investigate the thermochemical conversion of OPS in a pilot-scale fluidised bed combustor. The net heating value of OPS was 24.93 MJ/kg. The effect of primary air flowrate and initial bed temperature were the main parameters investigated. The bed and bed's surface temperature were found to decrease as the primary air flowrate increased. In all tests CO emissions were less than 0.2%. The emissions of SO₂ and HCl ranged from 0.02 ppm to 0.05 ppm, significantly below the permitted levels set by legislation. Stable combustion was observed at a bed temperature of 950 °C. The most abundant elements found in the ash were Al, Ca, Fe, K, Mg, Mn, P, S and Si. However, due to the temperature regime used in the study fouling would not be an issue.     

中国与澳大利亚国企改革比较研究(英文)

介绍了澳大利亚国企改革的最新进展 ,分析了澳大利亚企改革对中国改革的借鉴作用。尽管澳中两国在许多方面不同 ,但是澳大利亚国有经济私有化中许多有争论的问题在中国改革中也存在 ,因此一些改革措施对中国的改革也有一定的借鉴作用     

Hydrogenation of vegetable oils using mixtures of supercritical carbon dioxide and hydrogen

Hydrogenation of vegetable oils under supercritical conditions can involve a homogeneous one-phase system, or alternatively two supercritical components in the presence of a condensed phase consisting of oil and a solid catalyst. The former operation is usually conducted in flow reactors while the latter mode is more amenable to stirred, batch-reactor technology. Although many advantages have been cited for the one-phase hydrogenation of oils or oleochemicals using supercritical carbon dioxide or propane, its ultimate productivity is limited by the oil solubility in the supercritical fluid phase as well as unconventional conditions that affect the hydrogenation. In this study, a dead-end reactor has been utilized in conjunction with a head-space consisting of either a binary fluid phase consisting of varying amounts of carbon dioxide mixed with hydrogen or neat hydrogen for comparison purposes. Reaction pressures up to 2000 psi and temperatures in the range of 120–140°C have been utilized with a conventional nickel catalyst to hydrogenate soybean oil. Depending on the chosen reaction conditions, a wide variety of end products can be produced having different iodine values, percentage trans fatty acid content, and dropping points or solid fat indices. Although addition of carbon dioxide to the fluid phase containing hydrogen retards the overall reaction rate in most of the studied cases, the majority of products have low trans fatty acid content, consistent with a nonselective mode of hydrogenation.     

Subtle variations in the structure of crosslinked epoxy networks and the impact upon mechanical and thermal properties

Presented here is an investigation of the structure–property relationships of crosslinked networks using three bi-functional glycidyl ether aromatic epoxy resins, two bi-aryl and one tri-aryl, cured with bi- and tri-aryl amines. Subtle changes to the monomer chemistry including changing aromatic substitution patterns from meta to para, methylene to isopropyl and isopropyl to ether were explored. Changing an epoxy resin backbone from methylene to isopropyl enhances backbone rigidity thus increasing glass transition temperature (T_g), yield strength, and strain despite reducing modulus. Changing meta-substitution to para increases T_g and yield strain while leaving strength unaffected and reducing modulus. Changing isopropyl linkages to ether reduces modulus, strength, T_g, and yield strain reflecting increased molecular flexibility. Using three instead of two aromatic rings increases the molecular weight between crosslinks thereby decreasing T_g and yield strain while increasing modulus and strength. Despite the complexities of multiple systems for varying epoxy resins and amine hardeners, the effect upon network properties is explained in terms of short- and long-range molecular and segmental mobility, crosslink density, and equilibrium packing density. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48874.