Design and evaluation of fundamental-mode and polarization-stabilized VCSELs with a subwavelength surface grating

We demonstrate 850-nm oxide-confined vertical-cavity surface-emitting lasers (VCSELs) with a locally etched subwavelength surface grating that are single-mode and polarization stable from threshold up to thermal roll-over, reaching /spl sim/4 mW of output power. The side-mode suppression ratio (SMSR) is >30 dB and the orthogonal polarization suppression ratio (OPSR) is /spl sim/20 dB. Moreover, no distortion of the far-field beam profile is observed as a result of the surface grating. Our numerical calculations show that a carefully designed VCSEL can have a high simultaneous mode and polarization selectivity without a significant increase in loss for the favored fundamental mode with polarization state perpendicular to the grating lines. This indicates characteristics such as threshold current and resonance frequency will not be notably degraded. The calculations also show a low sensitivity to variations in grating etch depth and duty cycle, which relaxes fabrication tolerances. In our experimental parametric study, where the oxide aperture diameter, surface grating diameter, and grating duty cycle were varied, the combined mode and polarization selection was investigated. For an optimum combination of oxide aperture and surface grating diameters of 4.5 and 2.5 /spl mu/m, respectively, the device is found to be single-mode and polarization stable for a broad range of grating duty cycles, from 55% to 75%, with only a small variation in other laser performances, which is in line with theory.     

Single fundamental-mode output power exceeding 6 mW from VCSELs with a shallow surface relief

A single fundamental-mode output power of 6.5 mW was achieved from an 850-nm vertical-cavity surface-emitting laser (VCSEL) with a shallow surface relief, the highest single-mode power ever reported using this technique. The VCSELs were fabricated from epitaxial material grown to yield an antiphase reflection from the topmost layer. A circular surface relief, acting as a mode discriminator, was etched in the center to reduce the mirror loss for the fundamental mode. This "inverted" surface-relief technique offers relaxed etch depth control and, therefore, improves reproducibility and yield.     

Large Particle Penetration During PM10 Sampling

The objective of the present study was to characterize the performance of a federal reference method (FRM) PM₁₀ size-selective inlet using analysis methods designed to minimize uncertainty in measured sampling efficiencies for large particles such as those most often emitted from agricultural operations. The performance of an FRM PM₁₀ inlet was characterized in a wind tunnel at a wind speed of 8 km/h. Data were also collected for 20 and 25 μm particles at wind speeds of 2 and 24 km/h. Results of the present sampler evaluation compared well with those of previous studies for a similar inlet near the cutpoint, and the sampler passed the criteria required for certification as a FRM sampler when tested at 8 km/h. Sampling effectiveness values for particles with nominal diameters of 20 and 25 μm exceeded 3% for 8 and 24 km/h wind speeds in the present study and were statistically higher than both the “ideal” PM₁₀ sampler (as defined in 40 CFR 53) and the ISO (1995) standard definition of thoracic particles (p < 0.05) for 25 μm particles leading to the potential for significant sampling bias relative to the “ideal” PM₁₀ sampler when measuring large aerosols.

Copyright 2014 American Association for Aerosol Research     

Cerebral emboli and serum S100beta during cardiac operations

BACKGROUND: The glial protein S100beta has been used to estimate cerebral damage in a number of clinical settings. The purpose of this investigation was to determine the correlation between cerebral microemboli and S100beta levels during cardiac operations. METHODS: Transcranial Doppler ultrasonography was used to measure emboli in the right middle cerebral artery. Emboli counts (n = 111) were divided into five time periods: (1) incision to aortic cannulation; (2) aortic cannulation to cross-clamp onset; (3) cross-clamp onset to cross-clamp release; (4) cross-clamp release to decannulation; and (5) decannulation to chest closure. The level of S100beta (n = 156) was measured at baseline, at the end of cardiopulmonary bypass, then 150 and 270 minutes after cross-clamp release. RESULTS: The level of S100beta correlated with age, cardiopulmonary bypass time, cross-clamp time, and number of emboli at time period 2. Although cardiopulmonary bypass time was univariately associated with S100beta level, it became nonsignificant in a multivariable model that included age and cross-clamp time. CONCLUSIONS: The correlation of S100beta level with emboli measured during cannulation (time period 2) supports the hypothesis that cannulation is a high-risk time period for cerebral injury.     

Increased transversions in a novel mutator colon cancer cell line

We describe a novel mutator phenotype in the Vaco411 colon cancer cell line which increases the spontaneous mutation rate 10-100-fold over background. This mutator results primarily in transversion base substitutions which are found infrequently in repair competent cells. Of the four possible types of transversions, only three were principally recovered. Spontaneous mutations recovered also included transitions and large deletions, but very few frameshifts were recovered. When compared to known mismatch repair defective colon cancer mutators, the distribution of mutations in Vaco411 is significantly different. Consistent with this difference, Vaco411 extracts are proficient in assays of mismatch repair. The Vaco411 mutator appears to be novel, and is not an obvious human homologue of any of the previously characterized bacterial or yeast transversion phenotypes. Several hypotheses by which this mutator may produce transversions are presented.     

Lipid patches in membrane protein oligomers: crystal structure of the bacteriorhodopsin-lipid complex

Heterogenous nucleation on small molecule crystals causes a monoclinic crystal form of bacteriorhodopsin (BR) in which trimers of this membrane protein pack differently than in native purple membranes. Analysis of single crystals by nano-electrospray ionization-mass spectrometry demonstrated a preservation of the purple membrane lipid composition in these BR crystals. The 2.9-A x-ray structure shows a lipid-mediated stabilization of BR trimers where the glycolipid S-TGA-1 binds into the central compartment of BR trimers. The BR trimer/lipid complex provides an example of local membrane thinning as the lipid head-group boundary of the central lipid patch is shifted by 5 A toward the membrane center. Nonbiased electron density maps reveal structural differences to previously reported BR structures, especially for the cytosolic EF loop and the proton exit pathway. The terminal proton release complex now comprises an E194-E204 dyad as a diffuse proton buffer.