Reactive Laser Ablation Synthesis of Nanosize Alumina Powder

An aluminum (Al) target was laser ablated in an oxygen (O₂) atmosphere, producing nanosize alumina (Al₂O₃) powder. The powder surface area decreased (and the particle size increased) with both increasing oxygen pressure and laser fluence. All powders produced had surface areas between 135 and 250 m²/g, corresponding to primary particle sizes ranging from 7 to 3 nm in radius. Phase evolution with temperature was studied via X-ray diffraction. These powders showed a direct transformation from γ- to α-alumina at approximately 1200°C, bypassing other transition alumina phases, while still maintaining small particle size ( 30 nm). Despite the nanosize particles, green densities equal to 54% of the skeletal density (i.e., true density of the solid phase) were obtained by uniaxial pressing at 40 MPa.     

Reactive Laser Ablation Synthesis of Nanosize Aluminum Nitride

An aluminum (Al) target was laser ablated in a nitrogen (N₂) atmosphere, producing aluminum nitride (AlN) powder. These powders were calcined at 900°C for 2 h. Powders were produced at various nitrogen pressures, and the calcined powders were tested for unreacted aluminum content, using differential thermal analysis (DTA). The AlN powder, produced at a laser fluence of 12 J/cm² and a nitrogen pressure of 10.0 kPa (75 torr), showed no evidence of unreacted aluminum by DTA and was phase-pure AlN by X-ray diffraction (XRD). The surface area of this powder is 82 m²/g, corresponding to a particle size of ∼11 nm, which is in good agreement with TEM observations.     

Enantiomer-based specificity in pheromone communication by two sympatricGnathoirichus species (Coleoptera: Scolytidae)

The aggregation pheromone ofGnathotrichus retusus was isolated and identified as (S)-(+)-sulcatol (6-methyl-5-hepten-2-ol). In laboratory and field experiments,G. retusus responded to (S)-(+)-sulcatol, but not to (±)-sulcatol, which was attractive to the sympatric species,G. sulcatus. G. sulcatus did not respond to optically pure (S)-(+)-sulcatol, but began to respond when 1% (R)-(–)-sulcatol was present in an enantiomeric mixture.Research supported by the National Science Foundation, U.S.A. (Grant BMS-74-13643), and the Natural Sciences and Engineering Research Council of Canada (Co-op grant A0243 and Operating Grant A3881 and A3785).     

求解背包问题的病毒协同进化粒子群算法

为提高粒子群算法的搜索性能,提出一种基于病毒进化理论的改进离散粒子群算法:病毒协同进化粒子群算法.在粒子群中引入生物病毒机制和宿主与病毒基于感染操作的思想,病毒采用与粒子等长的编码方式,执行反向代换、结合等操作,利用病毒的水平感染和垂直传播能力较好地维持个体的多样性和对解空间的局部搜索能力.通过解决背包问题对算法进行验证,仿真表明所提算法搜索性能优于遗传算法、模拟退火及标准粒子群等其他算法.该算法能有效求解背包问题等NP难题.     

Optimization of the in Situ Transesterification of Grain Sorghum (Milo) DDGS to Fatty Acid Methyl Esters and Fatty Acid Ethyl Esters

Distillers grains and solubles generated from the ethanol fermentation of grains contain acylglycerols (AG) that can be successfully converted to fatty acid methyl esters (FAME) and fatty acid ethyl esters (FAEE), commonly known as biodiesel. However, when grain sorghum (milo) DDGS were used as a feedstock for in situ transesterification (IST) under the previously established optimal conditions for other AG-bearing substrates, the yield plateaued at only 32.2% (corrected in this study to 24.2%). Several IST studies have reported significantly higher conversions of AG-bearing substrates to FAME. Therefore, the goal of this IST study was to improve the conversion of the AG in milo DDGS to FAME and FAEE by varying the temperature of reaction, the concentrations of the base (sodium methylate, NaOMe), volume of methanol and ethanol, and the amount of moisture in DDGS. Methyl tert-butyl ester was also evaluated as a co-solvent intended to improve miscibility and reaction rate. Among these variables, the most effective change was an increase in temperature from 40 to 65 °C. The most successful reaction used a AG:NaOMe:MeOH molar ratio of 1.0:2.6:168.9. Those reaction conditions used 4.8 mmol NaOMe dissolved in 12.6 mL MeOH and resulted in a 79.8% conversion of AG to FAME.     

面向不同利益相关者的IT投资决策模型

为了响应不同利益相关者在IT投资决策过程中的不同需求,把备选项目看作一个组合,综合IT项目的战略对应和财务收益为目标,权衡其成本、收益和风险,构建基于模糊多目标规划的IT投资决策模型,其中模糊数用来刻画不确定的项目信息。通过改变各临界值和求解过程中产生的参数,模型支持各种假设分析。最后用案例说明模型的用法和功能。     

Physicochemical properties of calcific deposits isolated from porcine bioprosthetic heart valves removed from patients following 2-13 years function

The purpose of this study was to characterize the physicochemical properties of calcific deposits that cause the failure of tissue-derived heart valve bioprostheses. This was done in an effort to understand the mechanism of pathologic biomineralization in the cardiovascular system and potentially prevent deterioration of bioprostheses. Calcific deposits taken from 10 failed bioprosthetic valves that had been implanted in patients for 2-13 years were characterized by chemical analysis, x-ray diffraction, FTIR spectroscopy, scanning electron microscopy, polarized light microscopy, and solubility measurements. The combined results identified the biomineral as an apatitic calcium phosphate salt with substantial incorporation of sodium, magnesium and carbonate. The average Ca/PO4 ratio for this "young" pathologic biomineral was approximately 1.3, considerably lower than approximately 1.7 found in mature atherosclerotic plaque biomineral and mature skeletal biomineral, both of which approximate hydroxyapatite in composition. Deproteinated calcific deposits from bioprostheses had thermodynamic solubilities comparable to those of both atherosclerotic plaque, typical pathologic biomineral and hydrolyzed octacalcium phosphate (OCP, Ca4H(PO4)3 x 2.5 H2O), a proposed precursor phase to biomineral apatite. This later finding, together with chemical composition and structural details of the bioprosthetic deposits themselves, supports a mechanism of cardiovascular calcification in which OCP plays a crucial role in the formation of the final apatitic phase. This suggests an approach toward prevention of bioprosthetic tissue calcification through control of the formation of the kinetically favored OCP precursor and/or its transformation into bioapatite.     

Isolation of yeast artificial chromosomes free of endogenous yeast chromosomes: construction of alternate hosts with defined karyotypic alterations

An intrinsic feature of yeast artificial chromosomes (YACs) is that the cloned DNA is generally in the same size range (i.e., approximately 200-2000 kb) as the endogenous yeast chromosomes. As a result, the isolation of YAC DNA, which typically involves separation by pulsed-field gel electrophoresis, is frequently confounded by the presence of a comigrating or closely migrating endogenous yeast chromosome(s). We have developed a strategy that reliably allows the isolation of any YAC free of endogenous yeast chromosomes. Using recombination-mediated chromosome fragmentation, a set of Saccharomyces cerevisiae host strains was systematically constructed. Each strain contains defined alterations in its electrophoretic karyotype, which provide a large-size interval devoid of endogenous chromosomes (i.e., a karyotypic "window"). All of the constructed strains contain the kar1-delta 15 mutation, thereby allowing the efficient transfer of a YAC from its original host into an appropriately selected window strain using the kar1-transfer procedure. This approach provides a robust and efficient means to obtain relatively pure YAC DNA regardless of YAC size.     

Exciton Formation Dynamics and Band-Like Free Charge-Carrier Transport in 2D Metal Halide Perovskite Semiconductors

Metal halide perovskite (MHP) semiconductors have driven a revolution in optoelectronic technologies over the last decade, in particular for high-efficiency photovoltaic applications. Low-dimensional MHPs presenting electronic confinement have promising additional prospects in light emission and quantum technologies. However, the optimisation of such applications requires a comprehensive understanding of the nature of charge carriers and their transport mechanisms. This study employs a combination of ultrafast optical and terahertz spectroscopy to investigate phonon energies, charge-carrier mobilities, and exciton formation in 2D (PEA)₂PbI₄ and (BA)₂PbI₄ (where PEA is phenylethylammonium and BA is butylammonium). Temperature-dependent measurements of free charge-carrier mobilities reveal band transport in these strongly confined semiconductors, with surprisingly high in-plane mobilities. Enhanced charge-phonon coupling is shown to reduce charge-carrier mobilities in (BA)₂PbI₄ with respect to (PEA)₂PbI₄. Exciton and free charge-carrier dynamics are disentangled by simultaneous monitoring of transient absorption and THz photoconductivity. A sustained free charge-carrier population is observed, surpassing the Saha equation predictions even at low temperature. These findings provide new insights into the temperature-dependent interplay of exciton and free-carrier populations in 2D MHPs. Furthermore, such sustained free charge-carrier population and high mobilities demonstrate the potential of these semiconductors for applications such as solar cells, transistors, and electrically driven light sources.