Free and esterified sterols of cotton buds and anthers

Capillary gas liquid chromatography analyses were conducted on free and esterified sterol fractions of cotton (Gossypium hirsutum cv. Stoneville 213) floral buds and anthers. The free sterols of both cotton buds and anthers consist mainly of the common plant sterols sitosterol, stigmasterol and 24ζ-methylcholest-5-en-3β-ol. The composition of esterified sterols of cotton buds and anthers were similar, and consisted of pollinastanol, 31-norcycloartanol, cycloartenol, 31-norcycloartenol, 24-dehydropolinastanol and sitosterol. Desmosterol was also present in both the free and esterified sterols of anthers. The identities of the sterols were confirmed by gas chromatography-mass spectrometry analyses. Esterified sterols accounted for 46.7 and 88.7% of total sterols of cotton bud and anthers, respectively. The ratio of esterified sterol to free sterol per gram of tissue is about 8∶1 in anthers. The Δ⁵-sterols of the esterified sterols of cotton buds and anthers account for only 17 and 9.2% of the total sterols, respectively.     

Influence of Substrate Type on Level Dyeing of Acrylic Yarn Packages

In an earlier paper [1], the influence of flow rate, ramp (constant rate of temperature rise) and package density on the rates of dyeing of two basic dyes on Ex/an, and on the levelness obtained in the resulting dyeings, was investigated, and a relationship was derived to link these factors quantitatively. This work has now been extended to cover the behaviour of various basic dyes on Exlan and other acrylic fibres, under conditions expected to give borderline levelness. It has been shown that the shape of the rate–of–dyeing curve depends on the type of acrylic fibre and, to a lesser extent, on the cationic retarder used, but not on dye type within the group of CV2. 5–3. 5 basic dyes examined. The response of dyeing rate and degree of unlevelness to deliberate variations of ramp, as demonstrated in the previous work on Exlan, is now confirmed on Cashmilon. Evidence of a different type of random unlevelness, not related directly to dyeing rate, was also obtained from dyeings on the various fibres at a slow ramp.     

Mesoporous silica with short-range MFI structure

A new type of mesoporous silica has been prepared which showed 780 m²/g of BET surface area and 0.6 ml/g of primary mesopores narrowly distributed around 4.2 nm. More importantly however, is that it showed short-range zeolite crystallinity as demonstrated by FTIR and XRD analysis, and hydrophobicity as demonstrated by water and n-hexane adsorption.

This material was synthesized via a dual-template, three-step hydrothermal–flocculation–steaming synthesis procedure developed by us recently. Briefly, MFI nanoprecursors (NPs) were first prepared by a low-temperature hydrothermal step using TPAOH as template for zeolite structure, and then flocculated using a surfactant that served as the template for the mesopores. The collected NPs are mesoporous silica exhibiting short-range MFI domains when directly calcined. However, the steaming step promoted the crystallization of the NPs and created uniform mesopores. It was found that almost every detail in these procedures affected the properties of the final product. The most important variables, however, were identified as the duration the flocculants were kept in contact with the liquid phase, and the humidity under which the steaming was conducted. By properly adjusting the procedures, the said mesoporous silica, as well as nanocrystals having high external surface area, could be produced at will.     

Cyclic oxidation processes during anodizing of Al-Cu alloys

The influence of copper on the morphologies of porous anodic alumina has been investigated under current and voltage control using a sputtering-deposited Al-2.7 at.% Cu alloy and a commercial AA 2024-T3 aluminium alloy anodized in either sulphuric acid electrolyte or the same electrolyte but with addition of tartaric acid. The findings indicate that film development involves repeated formation of embryo cells of anodic alumina at the metal/film interface. During the initial stages of anodizing at constant voltage, cell formation is accompanied by current peaks in the current-time response. The porosity of the resultant films has a lateral aspect due to the layering of embryo cells. The thickness of individual layers is proportional to the formation voltage, with a ratio of the order 1 nm V⁻¹. The cell formation is accompanied by enrichment of copper in the alloy, incorporation of copper species into the anodic film, in low amounts relative to the alloy, and evolution of oxygen. These processes disrupt the formation of the classical pore morphology, characteristic of high purity aluminium, due to continuous formation of fresh embryo cells and re-direction of pores. The main effect of the tartaric acid addition to the sulphuric acid was to reduce the rate of anodizing of the alloys at constant voltage by about 10-20%.     

Effect of seed maturity on seed oil,fatty acid and crude protein content of eightCuphea species

Thirty-six lots of eightCuphea species grown at nine geographical locations from 1983 to 1985 were analyzed for seed weight, oil percentage, fatty acid and crude protein content. Twenty-two samples were separated into two distinct seed maturity groups and also analyzed. Seed maturity varied widely but had little effect on oil percentage, even though mature seeds were significantly heavier than less mature seeds. Lauric acid content generally increased and capric acid decreased with increasing seed maturity. Crude protein of whole seeds and defatted seed meal increased with increasing seed maturity. The net effect of harvestingCuphea wrightii seeds at full maturity in comparison with that for less mature seeds was to increase seed weight by 12%, decrease capric acid by 3%, increase lauric acid by 2% and increase crude protein of whole seeds and defatted meal by 5% and 4%, respectively. Seed oil content was decreased by a statistically nonsignificant 1%. The effect of seed maturity was comparable for the other four lauric acid- and three capric acid-rich species, even though distinct species differences in all factors were measured. Location and environment contributed to some quantitative and qualitative changes, but these factors are not considered to be major sources of variation. It is concluded that variation in seed maturity does not present a major constraint to commercialization ofCuphea as a new, alternative source of lauric and other medium-chain fatty acids. The ultimate significance of these minor changes will depend upon relative yields, demands and values of the various seed components.     

Rheology studies of polyethylene/chemical blowing agent solutions within an injection molding machine

An in‐line capillary rheometer nozzle equipped to a conventional reciprocating 55‐ton injection molding machine was used to study the viscosity of single phase low density polyethylene (LDPE)/chemical blowing agent (CBA) solutions under high shear rate in the concentration range of 0 to 5 wt%. The steady shear viscosity of LDPE with endothermic and exothermic chemical blowing agents was measured for shear rates ranging from 170 to 200,000 s^?1 and under pressure conditions up to 36 MPa. Pressure‐volume‐temperature (pvT) measurements were determined to account for the pressure effects and the changes of the free volume during processing. The viscosity reduction of the polymer‐CBA solution was found to be dependent on the concentration of the chemical blowing agent and melt pressure. A model based on a simplified Cross‐Carreau model, incorporating the pvT behavior of LDPE, and the free volume concept was proposed to estimate the viscosity reduction resulting from the addition of a chemical blowing agent. The model employs a scaling method based on concentration‐dependent and pressure‐dependent shift factors to collapse the viscosity measurement to a master curve at each temperature. POLYM. ENG. SCI., 45:1108–1118, 2005. © 2005 Society of Plastics Engineers     

求解背包问题的病毒协同进化粒子群算法

为提高粒子群算法的搜索性能,提出一种基于病毒进化理论的改进离散粒子群算法:病毒协同进化粒子群算法.在粒子群中引入生物病毒机制和宿主与病毒基于感染操作的思想,病毒采用与粒子等长的编码方式,执行反向代换、结合等操作,利用病毒的水平感染和垂直传播能力较好地维持个体的多样性和对解空间的局部搜索能力.通过解决背包问题对算法进行验证,仿真表明所提算法搜索性能优于遗传算法、模拟退火及标准粒子群等其他算法.该算法能有效求解背包问题等NP难题.     

Testing a short-term feeding trial to assess compositional and histopathological changes in hearts of rats fed vegetable oils

Male, female and castrated rats, three wk of age, were fed a low-fat diet for 14 wk followed by high-fat diets (20% by weight) for one wk containing graded levels of erucic acid from 1 to 50%, to evaluate the effect of short-term feeding and interaction of male sex hormones on formation of heart lesions. Some rats within each group were returned to the low-fat diet for one wk after the test period. For comparison, one group of three-wk-old male rats was fed the high fat 50% erucic acid diet for 15 wk. Erucic acid depressed growth rate and food consumption and increased cardiac lipidosis and triglycerides proportional to the erucic acid content of the diet. There were no sex differences, and the effects disappeared once rats were returned to the low-fat diet for one week. There was a significance (P<0.05) in the incidence of myocardial necrosis among male rats fed increased levels of erucic acid for one week, but the response was not linear to the increase in dietary erucic acid. Furthermore, the response was much less than in males fed the 50% erucic acid diet continually for 15 weeks. These results suggest that the short-term model is not a suitable substitute for the long-term feeding trial to test the cardiopathogenicity of a vegetable oil. The significantly lower incidence in myocardial lesions in female and castrated male rats compared with male rats suggests involvement of sex hormones. However, the process appears to be long term, since changes in cardiac lipids and their fatty acid pattern between sexes became evident after one wk on diet but was significant only after long-term feeding. Deceased.     

Quantitating heart lipids: Comparison of results obtained using the Iatroscan method with those from phosphorus and gas chromatographic techniques

The precision and accuracy of the Iatroscan method was evaluated by comparing the results obtained with established phosphorus and gas chromatographic techniques. A complete lipid class analysis of rat heart lipids was chosen in order to evaluate the performance of the Iatroscan method for biological samples which contained both neutral lipids and phospholipids. A partial scan and repeat development with chloroform/methanol/water (68.5∶29∶2.5) was introduced to achieve consistently good separations of the phospholipids on the Chromarods in the Iatroscan method. The results showed that the precision of the Iatroscan method for some lipid classes was comparable to that of phosphorus or gas chromatographic techniques, while for other lipid classes it was lower. Compared to the data obtained using the phosphorus method, the Iatroscan data were generally similar, while the gas chromatographic method generally gave lower values. These findings, together with the advantages of time required for analysis, size of sample, and universality of detection, suggest that the Iatroscan is a valuable complementary method for complex lipid analyses.