Low-temperature properties of triglyceride-based diesel fuels: Transesterified methyl esters and petroleum middle distillate/ester blends

This work examines low-temperature properties of triglyceride-based alternate fuels for direct-injection compression-ignition engines. Methyl esters from transesterified soybean oil were studied as neat fuels and in blends with petroleum middle distillates (No. 1 or No. 2 diesel fuel). Admixed methyl esters composed of 5–30 vol% tallowate methyl esters in soyate methyl esters were also examined. Pour points, cloud points, and kinematic viscosities were measured; viscosities at cooler temperatures were studied to evaluate effects of sustained exposure. Low-temperature filterability studies were conducted in accordance with two standard methodologies. The North American standard was the low-temperature flow test (LTFT), and its European equivalent was the cold-filter plugging point (CFPP). With respect to cold-flow properties, blending methyl esters with middle distillates is limited to relatively low ester contents before the properties become preclusive. Under most conditions, cold-flow properties were not greatly affected by admixing the methyl esters with up to 30 vol% tallowate (before blending). Least squares analysis showed that both LTFT and CFPP of formulations containing at least 10 vol% methyl esters are linear functions of cloud point. In addition, statistical analysis of the LTFT data showed a strong 1:1 correlation between LTFT and CP. This result may prove crucial in efforts to improve low-temperature flow properties of alternate diesel fuels that contain methyl esters derived from triglycerides.     

Oxidative stability of soybean oil fatty acid methyl esters by oil stability index (OSI)

Biodiesel, an alternative diesel fuel derived from transesterification of vegetable oils or animal fats, is composed of saturated and unsaturated long-chain FA alkyl esters. During long-term storage, oxidation caused by contact with air (autoxidation) presents a legitimate concern with respect to monitoring and maintaining fuel quality. Extensive oxidative degradation may compromise quality by adversely affecting kinematic viscosity, acid value, or PV. This work examines the oil stability index (OSI) as a parameter for monitoring the oxidative stability of soybean oil FAME (SME). SME samples from five separate sources and with varying storage and handling histories were analyzed for OSI at 60°C using an oxidative stability instrument. Results showed that OSI may be used to measure relative oxidative stability of SME samples as well as to differentiate between samples from different producers. Although addition of α-tocopherol or TBHQ increased OSI, responses to these antioxidants varied with respect to SME sample. Variations in response to added antioxidant were attributed to aging and other effects that may have caused oxidative degradation in samples prior to acquisition for this study. Results showed that OSI was more sensitive than iodine value in detecting the effects of oxidative degradation in its early stages when monitoring SME during storage.     

Dependence of oil stability index of fatty compounds on their structure and concentration and presence of metals

During storage and use, vegetable oil-derived industrial products such as biodiesel and biodegradable lubricants can be subjected to conditions that promote oxidation of their unsaturated components. The materials arising during oxidation and subsequent degradation can seriously impair the quality and performance of such products. Therefore, oxidative stability is a significant issue facing these vegetable oil-derived products, and enhanced understanding of the influence of various components of vegetable oils and storage parameters is necessary. In this work, the oil stability index (OSI) was used for assessing oxidation of monoalkyl esters of FA by varying several parameters. Neat fatty compounds and prepared mixtures thereof were studied for assessing the influence of compound structure and concentration. Small amounts of more highly unsaturated compounds had a disproportionately strong effect on oxidative stability. The recently developed concept of bis-allylic equivalents correlated more closely than the iodine value with the OSI times of mixtures of fatty esters. The OSI times of free acids were shorter than those of the corresponding alkyl esters. The presence of copper, iron, and nickel also reduced oxidative stability, but their effect was less than the presence of more highly unsaturated fatty compounds. Of these metals, copper had the strongest catalytic effect on OSI time. OSI may be an alternative to long-term storage tests for determining the influence of extraneous materials such as metals on oxidative stability.     

The stress cracking of polyamides by metal salts. Part III. Metal thiocyanates

The stress cracking of polyamide (nylon 6) by a number of metal thiocyanates in aqueous and nonaqueous solutions has been investigated. Lithium, zinc and cobalt_II thiocyanates were the most active and their activity was compared with that of the corresponding metal halides. Stress cracking parameters were determined and the mechanism of cracking studied by infrared techniques. The action of metal thiocyanates on nylon 6 is similar to that of the corresponding metal halides. Some metal cobaltothiocyanates were also found to be active stress cracking agents.     

Developmental variations in plasma leptin,leptin soluble receptor and their molar ratio in healthy infants

Background  

Leptin and its soluble receptor (sOB-R) are important to regulation of body composition but there are no data on the developmental variations in these plasma variables and their relationship with body composition measurements,     

Design and characterization of a multistage,mechanically stirred column absorber

A multistage, mechanically stirred column absorber has been designed and built with a modular construction, based on preliminary experiments with a test column. The column has been characterized as a gas-liquid contactor by its gas holdup, gas and liquid axial dispersion, mixing times, oxygen transfer coefficients and power consumptions, determined as a function of gas velocity, liquid velocity and impeller speed for one and two impellers per stage.Gassed power was correlated with ungassed power, gas rate and impeller speed. The gas phase axial mixing was essentially plug flow and the liquid phase axial mixing varied between 5 and 12 equivalent stages.Oxygen transfer coefficients were correlated with power consumptions and aeration rates by the equation K_La γ (P/V)^a(υ_sg)^b. The oxygen transfer coefficients with single stiffer stages were 25% above those for the double stirrer stages for equal power consumption and gas rates. Except for the low aeration and high power consumption extremes, the column showed superior oxygen transfer performance. in comparison to tubular loop and tank fermenters.     

Evaluation of the coupled multielectrode array sensor as a real-time corrosion monitor

Coupled multielectrode array sensors made of carbon steel and stainless steels were evaluated and compared with electrochemical noise (EN) sensors. Good correlations between sensor signals and solution corrosivity were observed for all multielectrode array sensors. Some correlation between the average pit index and solution corrosivity was observed for the carbon steel EN sensors, but not for the stainless steel EN sensors. The time-average noise resistances from the stainless steel EN sensors correlate well with solution corrosivity. There were, however, large random fluctuations and drifting for all EN signals, which make the EN sensors unreliable as real-time monitors.     

蜕变测试和断言检查的比较与实验研究

在软件测试中,测试预言是一种用于检查程序在测试中是否正常运行的机制.然而在某些实际情况下,还无法制定测试预言或者难以有效地应用测试预言.针对此类测试预言问题,蜕变测试于近年应运而生,但蜕变测试的效率问题还没有被充分地加以研究.作者用控制实验的方法研究了使用蜕变测试的成本及效率,进而将蜕变测试和常用的断言检查两种方法的错误检测率和时间成本进行了比较和分析.实验结果表明,相比于断言检查方法,蜕变测试具有检测到更多错误的潜力.通过分析蜕变测试的效率和性能,与断言测试相比,蜕变测试的错误检测率更高效而效率有待提高,可适用于较为粗粒度的测试需求.     

Development and fine structure of murine Purkinje cells in dissociated cerebellar cultures: dendritic differentiation, synaptic maturation, and formation of cell-class specific features

Cerebellar Purkinje cells (PC) display a highly distinctive form of polarity. We have cultured murine PCs from dissociated E16 cerebellar anlagen for 1 week to investigate the early stages of neuronal compartmentalization and synaptic interactions, features which are important for the establishment of neuronal polarity. To unequivocally identify the PCs we utilized light and electron microscopic immunocytochemistry with an anti-serum to the cell class-specific marker L7/pcp2 gene product. The PCs typically show a single, long axon, numerous short appendages classified as filopodia and protospines, and a small number of protodendrites. The nucleus is positioned asymmetrically in both the horizontal and vertical axes of the soma. The Golgi apparatus, coated and uncoated vesicles, and mitochondria are prominent ultrastructural features, while the endoplasmic reticulum is highly fragmented. The cell body receives rudimentary synapses on its smooth surfaces and appendages and no consistent morphological differences were detected between these elementary contacts. The axon is clearly identifiable; it emanates from either the cell body or a protodendrite, bifurcates at predominantly right angles, forms beaded collaterals, and terminates with relatively large growth cones. The varicosities of the PC axon contain pleomorphic synaptic vesicles and form rudimentary synapses primarily with the dendritic shafts of immunonegative neurons. The protodendrites are short, quickly tapering and sparsely branched; they emit numerous filopodia and immature spines and terminate with small growth cones. Rudimentary synapses are received on the proximal dendritic shafts and filopodia, and more mature synapses occur frequently on protospines. With few exceptions, PCs lie atop an astrocytic bed layer and glial processes are apposed to the various aspects of the PC body left free by the afferent axons. By contrast, PC processes are largely free of glial sheaths. We conclude that the "stellate stage" of PC development in situ is replicated rather faithfully in culture and that PCs have established polarity and have begun to form intercellular contacts by 1 week in vitro. Moreover, the PCs are already morphologically distinct from other cell types in the 1 week cultures, although they have yet to develop the differentiated features that distinguish mature PCs.