渐变观测系统的设计原则及其应用

本文根据塔里木盆地孔雀河地区的复杂构造特点，提出了一种渐变观测系统的设计思路——根据工区地质构造变化趋势和日的层埋深变化情况逐点、逐段设计采集参数(最大炮检距、道距、组合基距、覆盖次数等)，其中最大炮检距的选择考虑了动校正拉伸、速度分析精度、有效波和干扰波分离、反射系数稳定、有效压制多次波等因素，所设计的渐变观测系统能满足不同层次物理点位的动校正拉伸、速度分析精度和反射系数的要求。南北向和东西向地震测线采用不同的排列方式。在该区采用渐变观测系统所采集的单炮地震记录品质稳定，信噪比高，浅层多次波、折射波等干扰波减弱，较好地解决了资料处理中的速度分析、动校正拉伸、静校正、叠加及偏移成像问题，取得了明显效果。     

Functionalization of Graphene Oxide Films with Au and MoOx Nanoparticles as Efficient p‐Contact Electrodes for Inverted Planar Perovskite Solar Cells

A graphene oxide (GO) film is functionalized with metal (Au) and metal‐oxide (MoO_x) nanoparticles (NPs) as a hole‐extraction layer for high‐performance inverted planar‐heterojunction perovskite solar cells (PSCs). These NPs can increase the work function of GO, which is confirmed with X‐ray photoelectron spectra, Kelvin probe force microscopy, and ultraviolet photoelectron spectra measurements. The down‐shifts of work functions lead to a decreased level of potential energy and hence increased V_oc of the PSC devices. Although the GO‐AuNP film shows rapid hole extraction and increased V_oc, a J_sc improvement is not observed because of localization of the extracted holes inside the AuNP that leads to rapid charge recombination, which is confirmed with transient photoelectric measurements. The power conversion efficiency (PCE) of the GO‐AuNP device attains 14.6%, which is comparable with that of the GO‐based device (14.4%). In contrast, the rapid hole extraction from perovskite to the GO‐MoO_x layer does not cause trapping of holes and delocalization of holes in the GO film accelerates rapid charge transfer to the indium tin oxide substrate; charge recombination in the perovskite/GO‐MoO_x interface is hence significantly retarded. The GO‐MoO_x device consequently shows significantly enhanced V_oc and J_sc, for which its device performance attains PCE of 16.7% with great reproducibility and enduring stability.     

The Kurosawa-Desmedt key encapsulation is not chosen-ciphertext secure

At CRYPTO 2004, Kurosawa and Desmedt presented a new hybrid encryption scheme that is chosen-ciphertext (CCA2) secure in the standard model. Until now it was unknown if the key encapsulation part of the Kurosawa-Desmedt scheme by itself is still CCA2-secure or not. In this note we answer this question to the negative, namely we present a simple CCA2 attack on the Kurosawa-Desmedt key encapsulation mechanism. Our attack further supports the design paradigm of Kurosawa and Desmedt to build CCA2-secure hybrid encryption from weak key encapsulation.     

The frequency of CFVD speed report for highway traffic

The control signals of cellular networks have been used to infer the traffic conditions of the road network. In particular, consecutive handover events are being used to estimate the traffic speed. During traffic congestion, consecutive handover events may be rare because vehicles move slowly, and thus very few or no speed reports would be generated from the congested area.However, the traffic speed report rate during traffic congestion has not been investigated in the literature. In this paper, we present an analytic model to estimate the speed report rate from cellular network signaling in steady traffic conditions, that is, the traffic speed and flow are assumed constant. Real field trial data were used to validate our analytic model. In addition, computer simulations were conducted to study how speed reports are generated in dynamic traffic conditions when traffic speed and flow change rapidly. Our study indicates that in a typical cell of length 1.5 km with a typical expected call holding time of 1 min, no speed report was generated from a congested three‐lane highway. Our study demonstrates that the lack of speed reports from consecutive handover events during rush hours indicates severe traffic congestion, and new methods that can estimate traffic speed from cellular network data during severe traffic congestion need to be developed. Copyright © 2013 John Wiley & Sons, Ltd.     

Batch adsorption of organic pollutants from oxidation pond effluents using fly ashes

The batch shaking adsorption study was conducted to determine the potential of fly and volcanic ashes in removing organic pollutants from oxidation pond effluents. Factors affecting organic pollutant removals, such as concentrations and sizes of fly and volcanic ashes, initial pond effluent organic concentrations, washed and unwashed conditions of fly and volcanic ashes, were investigated. The TOC (total organic carbon) removal efficiency varied from 30 to 58 percent. The organic removal efficiency increased with increasing ash concentrations, with decreasing initial pond effluent organic concentrations and with decreasing sizes of ashes.     

External stimulus-responsive biomaterials designed for the culture and differentiation of ES,iPS, and adult stem cells

The physical and chemical characteristics of biomaterial surface and hydrogels can be altered by external stimuli, such as light irradiation, temperature changes, pH shifts, shear stress forces, electrical forces, and the addition of small chemical molecules. Such external stimulus-responsive biomaterials represent promising candidates that have been developed for the culture and differentiation of embryonic stem (ES) cells, induced pluripotent stem (iPS) cells, and adult stem cells. Biomaterials that are designed to respond in a reversible manner to specific external signals can be formed on micropatterned or non-micropatterned surface, in hydrogels, or on microcarriers. Stem cells and the cells differentiated from them into specific tissue lineages can be cultured and/or differentiated on dishes with immobilized external stimulus-responsive polymers. Cells can be detached from these dishes without using an enzymatic digestion method or a mechanical method when the appropriate external stimulus is generated on the surface. This review discusses the polymers and polymeric designs employed to produce surface and hydrogels for stem cell culture, differentiation, and/or cell detachment using various external stimuli.     

Miniemulsion polymerization of styrene. I. Preparation by redox initiator and new agitation mixer

Miniemulsion polymerization is usually conducted by a two-stage process, miniemulsion and polymerization, where the reactants are first processed using a high shearing machine, then transferred to a reactor to polymerize with magnetic stirring. However, the particles size distributions obtained usually are broad and skewed to small sizes owing to micelle and homogeneous nucleation in the aqueous solution. In this study, a saw-toothed blade mixer was successfully used for miniemulsion polymerization with a rotating rate over 500 rpm. The addition sequence of the components also affected the miniemulsion process in this system. The best result was obtained when the surfactant and cetyl alcohol were first dissolved in water and then the styrene was mixed in. Furthermore, a fast dissociated redox initiator system (cumene hydroperoxide/Fe²⁺/ethylenediaminetetraacetic acid-disodium salt/sodium formaldehyde sulfoxylate) was used to prepare miniemulsion polymer and monodisperse polystyrene. © 1996 John Wiley & Sons, Inc.     

Effects of processing conditions on birefringence development in injection molded parts. II. Experimental measurement

The birefringence of injection molded parts was measured using a digital photoelasticity system, which combines a digital image analysis technique and the half-fringe photoelasticity (HFP) method The effects of processing conditions, including melt temperature, mold temperature, filling time and packing pressure, on the birefringence development in the molded parts were investigated. It was found that temperature and pressure are the two dominant factors that determine the birefringence development in the parts during the molding process. Frozen-in birefringence of the molded parts decreases with increasing melt temperature, mold temperature and injection speed. Birefringence of the parts also increases with increased packing pressure, especially around the gate area. Numerical simulations using the Leonov viscoelastic fluid model predict similar dependence of birefringence of parts on processing conditions. Simulated results are also consistent with measured values.     

Dynamic Stabilization of DNA Assembly by Using Pyrrole-Imidazole Polyamide

We used N-methylpyrrole (Py)-N-methylimidazole-(Im) polyamide as an exogenous agent to modulate the formation of DNA assemblies at specific double-stranded sequences. The concept was demonstrated on the hybridization chain reaction that forms linear DNA. Through a series of melting curve analyses, we demonstrated that the binding of Py−Im polyamide positively influenced both the HCR initiation and elongation steps. In particular, Py−Im polyamide was found to drastically stabilize the DNA duplex such that its thermal stability approached that of an equivalent hairpin structure. Also, the polyamide served as an anchor between hairpin pairs in the HCR assembly, thus improving the originally weak interstrand stability. We hope that these proof-of-concept results can inspire future use of Py−Im polyamide as a molecular tool to modulate the formation of DNA assemblies.     

A direct methanol fuel cell system with passive fuel delivery based on liquid surface tension

The existing direct methanol fuel cell (DMFC) systems are fed with a fixed concentration of fuel, which are either a diluted methanol solution or an active fuel delivery driven by an attached active pump. Both approaches limit the power conversion density or degrade the overall efficiency of the DMFC system significantly. Such disadvantages become more severe in small-scale DMFCs, which require a high conversion efficiency and a small physical space suitable for portable electronics. In this paper, passive fuel delivery based on a surface tension driving mechanism was designed and integrated in a laboratory-made prototype to achieve consumption depending on fuel concentration and power-free fuel delivery. Unidirectional methanol-to-water smooth flow is achieved through the capillaries of a Teflon PTFE (polytetrafluoroethylene) membrane based on the difference in liquid surface tension. The prototype was demonstrated to exhibit a better polarization performance and to last for an extended operating time compared to conventional DMFCs. Its high efficiency and load regulation performance were also demonstrated in contrast to an active DMFC supplied with a constant concentration fuel. The fuel delivery driven by the liquid surface tension effect demonstrated here is believed to be more applicable for future small-scale DMFCs for portable electronics.