Defect Engineering in Ambipolar Layered Materials for Mode-Regulable Nociceptor

Defect engineering represents a significant approach for atomically thick 2D semiconductor material development to explore the unique material properties and functions. Doping-induced conversion of conductive polarity is particularly beneficial for optimizing the integration of layered electronics. Here, controllable doping behavior in palladium diselenide (PdSe₂) transistor is demonstrated by manipulating its adatom-vacancy groups. The underlying mechanisms, which originate from reversible adsorption/desorption of oxygen clusters near selenide vacancy defects, are investigated systematically via their dynamic charge transfer characteristics and scanning tunneling microscope analysis. The modulated doping effect allows the PdSe₂ transistor to emulate the essential characteristics of photo nociceptor on a device level, including firing signal threshold and sensitization. Interestingly, electrostatic gating, acting as a neuromodulator, can regulate the adaptive modes in nociceptor to improve its adaptability and perceptibility to handle different danger levels. An integrated artificial nociceptor array is also designed to execute unique image processing functions, which suggests a new perspective for extension of the promise of defect engineered 2D electronics in simplified sensory systems toward use in advanced humanoid robots and artificial visual sensors.     

调频同步广播小功率多频直放站功放设计

由于遮挡等原因在调频同步广播覆盖不到某些区域,需要小功率发射机进行补点。尤其在隧道内,需要对多个频道信号进行补强。因此设计一种新型的小功率直放站,其可同时发射多频道信号。由于不同频道信号之间不可避免地会产生一定地互调,这对功放的线性度提出了较高的要求。本文设计了一种可基本满足多频道小功率直放站需要的线性功放,并且实际制作了实物。经过测试,实际输出功率≥2.5W,三阶互调抑制比≥40d Bc。     

小型平面超宽带天线的研究进展

对小型平面超宽带(UWB)天线的研究现状进行了分析总结.首先介绍超宽带无线通信的技术背景,描述了超宽带天线的几种常见定义.然后分别对小型超宽带印刷单极子天线的设计、小型超宽带缝隙天线的设计、具有陷波功能的小型超宽带天线的设计进行了详细的评论,并讨论了超宽带天线的性能评价方法.最后展望了小型平面超宽带天线的未来研究方向.     

中国深空网VLBI相关处理器开发与应用

以中国深空网干涉测量信号处理中心建设为背景,论述了VLBI软相关处理系统的设计及初步实现。依据数据处理流程对软件模块化划分,一方面采用时间并行处理策略,将数据流按子积分周期分配给多个计算节点;一方面在相关计算节点内部应用多线程处理最大化提升效能。依托高性能集群系统,采用两级并行处理策略,实现了软件的设计开发,并在"嫦娥3号"(CE-3)任务中得到了首次应用。与事后精密轨道的比对分析表明,?DOR测量精度在1 ns量级,相当于90 nrad的角位置精度,等价于地月距离上37 m的位置误差。深空干涉测量信号处理中心VLBI软相关处理器有效支撑了CE-3的精密轨道测定。     

Facilitating GL13K Peptide Grafting on Polyetheretherketone via 1-Ethyl-3-(3-dimethylaminopropyl)carbodiimide: Surface Properties and Antibacterial Activity

In the present work, the antimicrobial peptide (AMP) of GL13K was successfully coated onto a polyetheretherketone (PEEK) substrate to investigate its antibacterial activities against Staphylococcus aureus (S. aureus) bacteria. To improve the coating efficiency, 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) was mixed with a GL13K solution and coated on the PEEK surface for comparison. Both energy-dispersive X-ray spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS) data confirmed 30% greater peptide coating on PEEK/GL13K-EDC than PEEK without EDC treatment. The GL13K graft levels are depicted in the micrograms per square centimeter range. The PEEK/GL13K-EDC sample showed a smoother and lower roughness (Rq of 0.530 µm) than the PEEK/GL13K (0.634 µm) and PEEK (0.697 µm) samples. The surface of the PEEK/GL13K-EDC was more hydrophilic (with a water contact angle of 24°) than the PEEK/GL13K (40°) and pure PEEK (89°) samples. The pure PEEK disc did not exhibit any inhibition zone against S. aureus. After peptide coating, the samples demonstrated significant zones of inhibition: 28 mm and 25 mm for the PEEK/GL13K-EDC and PEEK/GL13K samples, respectively. The bacteria-challenged PEEK sample showed numerous bacteria clusters, whereas PEEK/GL13K contained a little bacteria and PEEK/GL13K-EDC had no bacterial attachment. The results confirm that the GL13K peptide coating was able to induce antibacterial and biofilm-inhibitory effects. To the best of our knowledge, this is the first report of successful GL13K peptide grafting on a PEEK substrate via EDC coupling. The present work illustrates a facile and promising coating technique for a polymeric surface to provide bactericidal activity and biofilm resistance to medical implantable devices.     

CRITICAL SELF-ASSEMBLY CONCENTRATION OF AN IONIC-COMPLEMENTARY PEPTIDE EAK16-I

Understanding the process of self-assembly of peptides has been important in various biomedical engineering applications. This work focuses on the effect of peptide concentration on the molecular self-assembly of an ionic-complementary peptide, EAK16-I (AEAKAEAKAEAKAEAK), in aqueous solution. The surface tension and self-assembled nanostructures were determined for a wide range of peptide concentrations using axisymmetric drop shape analysis-profile (ADSA-P) and atomic force microscopy (AFM), respectively. Surface tension measurements revealed a critical self-assembly concentration of 0.3 mg peptide/ml water, below which the surface tension decreased rapidly with increasing peptide concentration, and above which the surface tension remained at a constant, plateau value. There were two structural transitions observed with increasing peptide concentration: the first was from globular nanostructures to fibrils, and the second from the fibrils to relatively thick fibers. The second structural transition occurred at the critical self-assembly concentration as determined by the surface tension measurements. The nanostructural behavior of EAK16-I was compared with that of EAK16-II, which has the same amino acid composition but a different charge distribution. Salt effects were also examined by adding NaCl to the peptide solution. The salt addition facilitated the formation of peptide fibrils at low peptide concentrations but increased the critical self-assembly concentration, which occurred at 0.8 mg peptide/ml water in the presence of 20 mM NaCl. The structural transitions involved in the self-assembly of EAK16-I resemble those from protofibrils to fibrils observed with numerous naturally occurring peptides. An understanding of this structural transition may have relevance in the analysis and treatment of peptide/protein conformational diseases and have application in the production of self-assembled protein nanostructures.     

Precipitation of asphaltenes from solvent-diluted heavy oil and thermodynamic properties of solvent-diluted heavy oil solutions

Ratios of n-heptane (hep) to toluene (tol) affect the solubility of the asphaltenes in heavy oil extraction processes. Consequently phase changes and time after mixing n-heptane and heavy oil in toluene are important for understanding produced emulsions. The kinetics of phase change when n-heptane is added to toluene-diluted heavy oils, and the thermodynamic properties of partially deasphalted heavy oils were studied. The methods used were monitoring precipitation in time using light microscopy, quantitative asphaltenes analysis by near infrared spectroscopy, refractive index and densities measurements, and calculated solubility parameters of mixtures. At critical mass ratios of hep/tol from 1.37 to 2.0 in diluted heavy oil the precipitated asphaltene particles were observed under the microscope after lag times from 2 h to instantly. Lag times were longer at low initial oil concentration. The floc growth time decreased as heavy oil concentration in toluene increased. The growth patterns in time appeared as dots to beads (strings) to clusters (fractal-like flocs). Final wt% precipitated asphaltenes vs. mass fraction (hep+tol)/heavy oil followed sigmoidal relationships. Curves showing wt% soluble asphaltenes vs. mass fraction hep/tol after 24 h initially followed the same shape as time zero curves and diverged at the onset ratios of hep/tol. Slope for precipitated asphaltenes vs. solubility parameters curve showed a break at 16.4 MPa^1/2. Linear correlations were established for concentrations of soluble asphaltenes in residual oils and density, for refractive index and density and for refractive index and solubility parameter. The latter correlation was in accordance with Lorenz-Lorentz theory. These equations provided a means by which oil density, refractive index and solubility parameter can be predicted when these measurements are difficult to measure practically.     

Functional acrylic acid as stabilizer for synthesis of smart hydrogel particles containing a magnetic Fe3O4 core

This paper reports a novel method to synthesize magnetic, stimuli-sensitive latex nanoparticles made with magnetite/poly(N-isopropylacrylamide-co-acrylic acid) (Fe₃O₄/P(NIPAAm-co-AAc)). To form a stabilized suspended core, iron oxide (Fe₃O₄) was functionalized with AAc such that further polymerization with NIPAAm and AAc monomers could occur. The P(NIPAAm-co-AAc) shell layer exhibited thermosensitive properties. The inclusion of Fe₃O₄ into the latex nanoparticles was confirmed using transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction spectroscopy, thermogravimetric analyzer (TGA), and superconducting quantum interference device magnetometer. The NIP–(AAc2.6–Fe) latex nanoparticles contained 2.25% Fe₃O₄ (by weight), as determined by TGA analysis. The particle diameters measured approximately 160–240 nm with a lower critical solution temperature of 35 °C. These novel magnetic stimuli-responsive latex nanoparticles have potential applications in numerous fields, such as catalyst supports, protein immobilization, cancer therapy, target drug delivery systems, and other biomedical applications.     

香港地区应用干式风机盘管系统节能和室内空气品质分析

冷板辐射加置换通风空词系统在保证室内环境的前提下比常规全空气空调系统节能,但在天气湿热的香港地区应用会出现冷板凝露现象,且采用置换通风方式,风量有限从而影响热舒适性.本文将干式风机盘管系统与独立除湿通风系统组合应用于香港地区办公楼,干式风机盘管系统处理室内显热负荷,独立除湿通风系统承担室内湿负荷和室外全热负荷.采用EnergyPlus软件模拟分析了该空调系统在香港地区某办公楼中的使用性能,结果表明该系统能很好地控制室内温、湿度,特别是湿度,与常规全空气空调系统相比,全年节能达10.3%.     

空空导弹末端非线性修正技术研究

针对红外空空导弹瞄准点与理想命中点不重合的矛盾,本文提出一种末端修正导引方法,修正导弹对目标的碰撞航线.导出了空间飞行时实现超前偏置的导引律,并提出简化导引律方案,对引入超前偏置的末端制导控制系统进行了分析,探讨了控制系统实现的方法.仿真表明对导引精度和脱靶量有显著提高,能达到理想的修正效果.