Water uptake and tensile properties of carboxylated styrene butadiene rubber based water born paints: Models for water uptake prediction

Despite significant advances in water based surface coating technology, the presence of surfactants in emulsion polymer binders leads to loss of performance after prolonged immersion in water, relative to solvent based coatings that are free of surfactant impurities. This study begins with water uptake evaluation of a range of emulsion polymer binders. A carboxylated styrene butadiene rubber latex (c-SBR) performed best in the latter evaluations and was selected for the formulation of an exterior grade paint and construction of a mathematical model to predict water uptake of the dry film. The c-SBR was then compounded with a range of inorganic fillers and water uptake and tensile properties were evaluated. Talc was found to be the best performing filler, and was used in a three factorial central composite design study where the simultaneous effects of talc, titanium dioxide and phenolic stabiliser on water up take were evaluated and fitted to response equations. A quadratic model was found to provide the most accurate prediction of effects associated with interactions between talc and TiO₂. Certain combinations of talc and titanium dioxide were found to be synergistic in reducing the water uptake. This was considered to be associated with a packing effect stemming from the vast difference in particle size between talc and titanium dioxide particles. An optimised formulation was finally prepared to meet one of the final formulation objectives; i.e., minimised water uptake. Preparation of such a formulation showed that the predicted and measured water uptake responses were in excellent agreement. This study illustrates the effectiveness of statistical experimental design methods in predicting the water uptake characteristics of water-based coatings.     

Note: The Use of Triallyl Cyanurate in Bonding PVC Plastisols to Steel

The use of diallyl phthalate as the basis for a non-extractable plasticizer for poly(vinylchloride) (PVC) is well-known. Used in conjunction with a primary plasticizer and a polymerization initiator, a plastisol coating for steel can be formulated which is oil or grease tolerant and can also be used for bonding some structural steel parts if the area is relatively large compared with the load to be applied. Defrayne and Twiss¹ describe the bonding of automobile hood assemblies by vinyl plastisol adhesives and Schneberger² emphasizes their use in the automobile industry though neither article gives the formulations employed. Commercial formulations giving pull-off strengths of the order of 1 to 4 MN. m^-2 always incorporate a proportion of a phenolformaldehyde resin or even an epoxy, but sound-deadening and other coatings of steel do not necessarily need this reinforcement. Phillips and Longworth³ particularly studied the use of diallylphthalate (DAP) as a polymerizable plasticizer and the consequent improvement in adhesion to mild steel. Sherlock⁴ used a simple formulation without additives when investigating the effect of surface cleaning and conversion coatings (oxides and phosphates). It was suggested that, as outlined below, improved adhesion would be expected if a small proportion of triallyl cyanurate (TAC) were added to the polymerizable plasticizer. This paper shows this expectation to be achieved although the proportion of the more expensive TAC needed for substantial increase in bond strength is greater than was hoped.     

A two‐station embossing process for rapid fabrication of surface microstructures on thermoplastic polymers

An embossing strategy involving a hot station and a cold station for sequentially heating and cooling the embossing tool was investigated to reduce cycle times in hot embossing polymer microstructures. Experimental studies showed that aluminum stamps with a thickness of 1.4 mm can be rapidly heated from room temperature to 200°C in 3 s using contact heating against a hot station at 250°C. Microchannels and microlenses were successfully embossed onto high‐density polyethylene and acrylonitrile–butadiene–styrene substrates using a heating time less than 3 s and a total cycle time around 10 s. The two‐station embossing process for the microlens was also numerically studied. The simulated filling behavior agreed with the experimental observation and the predicted thermal and deformation history of the polymer offered a good explanation on the experimentally observed process characteristics. POLYM. ENG. SCI., 47:530–539, 2007. © 2007 Society of Plastics Engineers.     

Factors influencing the photofading of commercial anthraquinone dyes in solution

The photofading of two anthraquinone dyes has been studied in aqueous solution using ultraviolet-visible absorption spectroscopy and flash photolysis. The influence of alcohol concentration, pH, atmosphere, photosensitisers and stabilisers have been examined and these lead to some important conclusions on the mechanism of dye fading. Essentially, the results indicate the photoexcited triplet state of the dye undergoes a process of either electron or hydrogen-atom abstraction depending on the nature of the environment. Other factors such as aggregation and singlet oxygen also appear to play an important role in solution photofading. The relevance of these results to photofading in a polymeric phase is discussed.     

Surface mass transfer processes using peat as an adsorbent for dyestuffs

The factors affecting the initial rate of Telon Blue (Acid) dye adsorption onto peat have been investigated. The surface mass transfer coefficients for the rate of dye removal from solution have been determined and correlated as the dimensionless mass transfer term Sh/Sc^0.33. The function Sh/Sc^0.33 has been correlated with respect to four variables, namely, agitation, initial dye concentration, peat particle size range and the temperature of the dye solution. The mass transfer term varies with T^5.5, d_p^0.13, c_o^?1.1 and R.P.M.^0.26; consequently temperature has the most pronounced effect on the mass transfer coefficient.     

From surface science to catalysis: Surface “explosions” observed on Rh crystals and supported catalysts

Phenomena called surface explosions have been reported for decomposition reactions on single crystals, and have been identified by the use of desorption methods. In particular, in TPD, they are manifested by extremely narrow peaks (as little as 3 K in width) and a desorption rate which increases with time in isothermal experiments. In this paper we report such observations for acetate species on Rh single crystals, but extend this to show for the first time that such effects are not restricted to single crystal/UHV experiments, but can also be found on a Rh/Al₂O₃ catalyst under ambient pressure conditions. These reactions can be classified as second order autocatalytic surface processes, where free surface Rh sites are an essential component of the reaction. It is shown that coadsorbed adatoms are also essential for such explosions to be seen and their role is proposed to be that of a template layer acting to order the acetate in self-poisoning configurations.     

The Causes and Prevention of Smut on Etched AISI 300 Stainless Steels

During the fabrication of stainless steel parts by photochemical machining (PCM), a seemingly random occurrence of a partially-adherent, brown/black deposit, known as smut, can occur. This quality problem has plagued the PCM industry for over 30 years. In the past, the problem has been attributed to “poor etch-quality” stainless steel. However, an extensive investigation by the authors, comprising some 7 person-years of effort, has established that while the metallurgy of the stainless steel has some influence on the formation of smut, by far the most important factor is the condition of the ferric chloride etchant used for etching the parts. The influences of etchant concentration, free hydrochloric acid content, temperature, atmosphere and hydrodynamic flow have now been assessed quantitatively for the first time. The investigation has led to the development of a theory outlining the causes of smut formation, thus providing solutions for its prevention.     

Particle filters and occlusion handling for rigid 2D–3D pose tracking

In this paper, we address the problem of 2D–3D pose estimation. Specifically, we propose an approach to jointly track a rigid object in a 2D image sequence and to estimate its pose (position and orientation) in 3D space. We revisit a joint 2D segmentation/3D pose estimation technique, and then extend the framework by incorporating a particle filter to robustly track the object in a challenging environment, and by developing an occlusion detection and handling scheme to continuously track the object in the presence of occlusions. In particular, we focus on partial occlusions that prevent the tracker from extracting an exact region properties of the object, which plays a pivotal role for region-based tracking methods in maintaining the track. To this end, a dynamical choice of how to invoke the objective functional is performed online based on the degree of dependencies between predictions and measurements of the system in accordance with the degree of occlusion and the variation of the object’s pose. This scheme provides the robustness to deal with occlusions of an obstacle with different statistical properties from that of the object of interest. Experimental results demonstrate the practical applicability and robustness of the proposed method in several challenging scenarios.     

Reviews

MARK FRESKO CONSULTANCY. Sources of digital information. British Library R&D Report 6102. London: British Library Research and Development Department, 1994. No ISBN given. No price indicated. 260 pp.

CHRIS CLARE and GORDON STUTELEY. Information systems — strategy to design. London: Chapman and Hall, 1995. ISBN 0 412 576708. £16.99.

POPE, IVAN. Internet UK. Hemel Hempstead: Prentice Hall International, 294 pp. ISBN 013 190950, £19.95. SCHOFIELD, SUE. UK Internet book. Wokingham: Addison‐Wesley, 301 pp. ISBN 0201 42766 4, £19.95.

RIMMER, STEVE. Planet Internet. New York: Windcrest, 1995. ISBN 0 8306 24724. £22.95 (pbk).

JILL H. ELLSWORTH and MATTHEW V. ELLSWORTH. The Internet business book. London: John Wiley & Sons, 1994. $22.95, 376pp. ISBN 0 471058092.

JOHN S. QUARTERMAN and SMOOT CARL‐MITCHELL. The e‐mail companion: communicate effectively via the Internet and other global networks. Addison‐Wesley, 1994. 318 pp. ISBN 0 201 40658 6. $19.95.

McCLURE, C.R., MOEN, W.E. and RYAN, J. Libraries and the Internet/NREN: perspectives, issues and challenges. London: Mecklermedia 1994. $35.00. ISBN 0 89736 824 7. McCLURE, C.R., BERTOT, J.C., and ZWEIZIG, D.L. Public libraries and the Internet: study results, policy issues and recommendations. Washington: National Commission on Libraries and Information Science, 1994. No price or ISBN given.

FRANCES BLOMELEY. Networks and network services: a user's guide. Immediate Publishing, 1994. ISBN 1–89831–00–03. 246 pp. £14.95.

NEIL SMITH (ed) ibraries, networks and Europe: a European networking study. British Library Research and Development Department, 1994. (LIR Series 101) 91 pp. ISBN 0 7123 3295 2. £25. (Distributed by Turpin Distribution Services Ltd, Blackhorse Road, Letchworth, Herts. SG6 1HN).

ALAN BRYANT. Creating successful bulletin board systems. Addison‐Wesley, 1994. ISBN 0–201–62668–3. $39.95.

Directory of electronic journals, newsletters and academic discussion lists. 4th ed. Compiled by Lisabeth A. King and Diane Kovacs, edited by Ann Okerson. Washington, DC: Association of Research Libraries, 1994. 575 pp. ISSN 1057–1337. $54 (paperback), $33 (ARL members).

THE BRITISH LIBRARY and ELECTRONIC PUBLISHING SERVICES LTD. Electronic publishing practice in the UK: LIR Report 95. University Press, Cambridge, 1994. 185 pp. ISBN 0 7123 3280 4. £30.00. (Distributed by Turpin Distribution Services, Blackhorse Road, Letchworth S96 1HN).

INTERNET WORLD'S On Internet 94: an international guide to electronic journals, newsletters, texts, discussion lists, and other resources on the Internet. edited by Tony Abbott with a Preface by Daniel P. Dem. Westport, London: Mecklermedia, 1994. £29.50 $45.00. ISBN 0–88736–929–4.

S. BANG. The Internet unleashed. Indianapolis: SAMS Publishing, 1994. $44.95. ISBN 0 672 30466 X.

GAIL K. DICKINSON, Selection and evaluation of electronic resources. Libraries Unlimited, 1994. ISBN 1 56308 098 2. £22.50.     

Thiamine concentrations in lake whitefish eggs from the upper Great Lakes are related to maternal diet

Thiamine deficiency is responsible for reproductive impairment in several species of salmonines in the Great lakes, and is thought to be caused by the consumption of prey containing thiaminase, a thiamine-degrading enzyme. Because thiaminase levels are extremely high in dreissenid mussels, fish that prey on them may be susceptible to thiamine deficiency. We determined thiamine concentrations in lake whitefish Coregonus clupeaformis eggs from the upper Laurentian Great Lakes to assess the potential for thiamine deficiency and to determine if thiamine concentrations in lake whitefish eggs were related to maternal diet. Mean thiamine concentrations in lake whitefish eggs were highest in Lake Huron, intermediate in Lake Superior, and lowest in Lake Michigan. Some fish had thiamine concentrations below putative thresholds for lethal and sublethal effects in salmonines, suggesting that some larval lake whitefish may currently be at risk of at least sublethal effects of low thiamine concentrations, although thiamine thresholds are unknown for lake whitefish. Egg thiamine concentrations in lake whitefish eggs were statistically significantly related to isotopic carbon signatures, suggesting that egg thiamine levels were related to maternal diet, but low egg thiamine concentrations did not appear to be associated with a diet of dreissenids. Egg thiamine concentrations were not statistically significantly related to multifunction oxidase induction, suggesting that lower egg thiamine concentrations in lake whitefish were not related to contaminant exposure.