Thermal conductivities of powder-filled epoxy resins

Effective thermal conductivities of powder-filled epoxy composites were experimentally obtained using a transient method. Fillers used were aluminum and cupric oxide. Comparisons of these data with published correlations indicate that Agari's model can give better fits. Nielsen's model may also give a good prediction of the shape of particles can be determined and values of parameters A and ?m are available. An alternative method of dealing with parameter C₂ in Agari's model is suggested. © 1993 John Wiley & Sons, Inc.     

Wave-front curvature as a cause of slow conduction and block in isolated cardiac muscle

We have investigated the role of wave-front curvature on propagation by following the wave front that was diffracted through a narrow isthmus created in a two-dimensional ionic model (Luo-Rudy) of ventricular muscle and in a thin (0.5-mm) sheet of sheep ventricular epicardial muscle. The electrical activity in the experimental preparations was imaged by using a high-resolution video camera that monitored the changes in fluorescence of the potentiometric dye di-4-ANEPPS on the surface of the tissue. Isthmuses were created both parallel and perpendicular to the fiber orientation. In both numerical and biological experiments, when a planar wave front reached the isthmus, it was diffracted to an elliptical wave front whose pronounced curvature was very similar to that of a wave front initiated by point stimulation. In addition, the velocity of propagation was reduced in relation to that of the original planar wave. Furthermore, as shown by the numerical results, wave-front curvature changed as a function of the distance from the isthmus. Such changes in local curvature were accompanied by corresponding changes in velocity of propagation. In the model, the critical isthmus width was 200 microns for longitudinal propagation and 600 microns for transverse propagation of a single planar wave initiated proximal to the isthmus. In the experiments, propagation depended on the width of the isthmus for a fixed stimulation frequency. Propagation through an isthmus of fixed width was rate dependent both along and across fibers. Thus, the critical isthmus width for propagation was estimated in both directions for different frequencies of stimulation. In the longitudinal direction, for cycle lengths between 200 and 500 milliseconds, the critical width was < 1 mm; for 150 milliseconds, it was estimated to be between 1.3 and 2 mm; and for the maximum frequency of stimulation (117 +/- 15 milliseconds), it was > 2.5 mm. In the transverse direction, critical width was between 1.78 and 2.32 mm for a basic cycle length of 200 milliseconds. It increased to values between 2.46 and 3.53 mm for a basic cycle length of 150 milliseconds. The overall results demonstrate that the curvature of the wave front plays an important role in propagation in two-dimensional cardiac muscle and that changes in curvature may cause slow conduction or block.     

Sanger DNA-sequencing reactions performed in a solid-phase nanoreactor directly coupled to capillary gel electrophoresis

A miniaturized, solid-phase nanoreactor was developed to prepare Sanger DNA-sequencing ladders which was directly interfaced to a capillary gel electrophoresis system. A biotinylated fragment of the rat brain actin gene (1 kbp) was amplified by PCR and attached to the interior wall of an (aminoalkyl)silane-derivatized fused-silica capillary tube via a biotin/streptavidin/biotin linkage. Coverage of the capillary wall with the biotinylated DNA averaged 77 +/- 10%. Stability of the anchored template under pressure (33 nL/s) and electroosmotic flows (11.3 nL/s) were favorable, requiring rinsing for > 150 h to reduce the surface coverage by only 50%. In addition, the immobilized template was stable toward temperatures required for preparing sequencing ladders, even under cycling conditions. Standard Sanger dideoxynucleotide termination performed in a large-volume (approximately 8 microL) solid-phase reactor using the thermally stable polymerase enzymes Taq and Vent and the polymerases T7 and Bst with off-line slab gel electrophoresis and autoradiographic detection indicated that acceptable fragment generation was achieved only in the case of the thermally stable polymerases. Banding was not apparent for T7 and Bst since all reagents were inserted into the column in a single plug at the beginning of the reaction. A small volume reactor (volume approximately 62 nL) was then used to perform DNA polymerase reactions and was coupled directly to a capillary gel column for separation. The capillary reactor was placed inside a thermocycler to control the temperature during chain extension and was directly connected to the gel column via zero dead volume fused-silica connectors. The complementary DNA fragments generated (C-track only) in the reactor were denatured using heat and directly injected onto the gel-filled capillary for size separation with detection accomplished using near-IR laser-induced fluorescence. Extension and single-base separation resolution of the C-track, which was directly injected onto the gel column, was estimated to be > 450 bases from the primer annealing site with plate numbers ranging from 1 x 10(6) to 2 x 10(6)/m.     

Preweaning growth traits for Senepol, Hereford, and reciprocal crossbred calves and feedlot performance and carcass characteristics of steers

We conducted a multiyear study in two phases to determine preweaning performance traits of Senepol (S x S), Hereford (H x H), and reciprocal (S x H and H x S) F1 crossbred calves and feedlot performance and carcass characteristics of steers. In Phase I, from 1985 to 1989, data from S x S (n = 194), H x H (n = 383), and S x H (n = 120) calves were used. Numbers of S x S cows were increased during Phase I so that data from H x S (n = 74) calves could be included in Phase II (1990 to 1992) in addition to S x S (n = 118), H x H (n = 130), and S x H (n = 56) calves. Also during Phase II, feedlot performance and carcass characteristics were determined for S x S (n = 30), H x H (n = 26), H x S (n = 36), and S x H (n = 26) steers. In Phase I, S x S calves had heavier (P < .01) birth weights and heavier (P < .01) 205-d adjusted weaning weights than H x H calves. Birth weights of S x H calves were heavier (P < .01) than the mean of the purebred calves, but 205-d adjusted weaning weights did not differ (P > .10). In phase II, direct heterosis was 3.5% for birth weight (P < .05) and 5.1% for 205-d adjusted weaning weight (P < .01). Senepol maternal breed effects were 1.9 kg for birth weight (P < .10) and 37.9 kg for 205-d adjusted weaning weight (P < .01). Levels of direct heterosis, Senepol maternal breed effects, and Hereford direct breed effects were significant for most feedlot performance traits of steer calves that were fed to a common end point. Breeds did not differ (P > .10) for USDA yield and quality grades, and direct heterosis was not significant for Warner-Bratzler shear force. These results demonstrate significant levels of heterosis in preweaning performance between S x S and H x H calves and in feedlot performance of steers. Levels of heterosis were smaller and nonsignificant for most carcass traits including meat tenderness, which did not differ between S x S and H x H steers in this study.     

Evidence that the RdeA protein is a component of a multistep phosphorelay modulating rate of development in Dictyostelium

We have isolated an insertional mutant of Dictyostelium discoideum that aggregated rapidly and formed spores and stalk cells within 14 h of development instead of the normal 24 h. We have shown by parasexual genetics that the insertion is in the rdeA locus and have cloned the gene. It encodes a predicted 28 kDa protein (RdeA) that is enriched in charged residues and is very hydrophilic. Constructs with the DNA for the c-Myc epitope or for the green fluorescent protein indicate that RdeA is not compartmentalized. RdeA displays homology around a histidine residue at amino acid 65 with members of the H2 module family of phosphotransferases that participate in multistep phosphoryl relays. Replacement of this histidine rendered the protein inactive. The mutant is complemented by transformation with the Ypd1 gene of Saccharomyces cerevisiae, itself an H2 module protein. We propose that RdeA is part of a multistep phosphorelay system that modulates the rate of development.     

Identification and elimination by site-directed mutagenesis of thermolabile aspartyl bonds in Aspergillus awamori glucoamylase

Both Dative Aspergillus niger glucoamylase and wild-type Aspergillusawamori glucoamylase expressed in Saccharo-myces cerevisiae,which have identical primary structures, undergo hydrolysisat aspartyl bonds at low pH values and elevated temperatures.In native A.niger enzyme the Aspl26–Glyl27 bond was preferentiallycleaved at pH 3.5,while at pH 4.5 cleavage of the Asp257–Pro258and Asp293–Gly294 bonds was dominant. In wild-type A.awamoriglucoamylase, cleavage of the latter was dominant at both pH3.5 and 4.5. Site-directed mutations Aspl26Glu and Glyl27Alain wild-type enzyme decreased specific activities by 60 and30%, respectively, and increased irreversible thermoinactivationrates 3- to 4-fold at pH 4.5. Replacement of Asp257 with Gluand Asp293 with Glu or Gin decreased specific activities by20%, but greatly reduced cleavage of the Asp257–Pro258and Asp293–Gly294 bonds. The Asp257Glu mutant was producedvery slowly and was more thermostable than wild–type glucoamylaseat pH 4.5up to 70°C. Replacement of Asp293 with either Gluor Gln significantly raised protein production and slightlyincreased thermostability at pH 3.5 and 4.5, but not at pH5.     

Interpretation of the impedance spectroscopy of cement paste via computer modelling

The d.c. conductivity, , and low-frequency relative dielectric constant, k, of Portland cement paste were monitored, using impedance spectroscopy, during cooling from room temperature down to -50 °C. Dramatic decreases in the values of and k, as great as two orders of magnitude, occurred at the initial freezing point of the aqueous phase in the macropores and larger capillary pores. This result provides strong experimental support for the dielectric amplification mechanism, proposed in Part II of this series, to explain the high measured low-frequency relative dielectric constant of hydrating Portland cement paste. Only gradual changes in the electrical properties were observed below this sudden drop, as the temperature continued to decrease. The values of and k of frozen cement paste, at a constant temperature of -40 °C, were dominated by properties of calcium-silicate-hydrate (C-S-H) and so increased with the degree of hydration of the paste, indicating a C-S-H gel percolation threshold at a volume fraction of approximately 15%–20%, in good agreement with previous predictions. Good agreement was found between experimental results and digital-image-based model computations of at -40 °C. Freeze-thaw cycling caused a drop in the dielectric constant of paste in the unfrozen state, indicating that measurements of k could be useful for monitoring microstructural changes during freeze-thaw cycling and other processes that gradually damage parts of the cement paste microstructure.     

Airborne vision‐based collision‐detection system

Machine vision represents a particularly attractive solution for sensing and detecting potential collision‐course targets due to the relatively low cost, size, weight, and power requirements of vision sensors (as opposed to radar and Traffic Alert and Collision Avoidance System). This paper describes the development and evaluation of a real‐time, vision‐based collision‐detection system suitable for fixed‐wing aerial robotics. Using two fixed‐wing unmanned aerial vehicles (UAVs) to recreate various collision‐course scenarios, we were able to capture highly realistic vision (from an onboard camera perspective) of the moments leading up to a collision. This type of image data is extremely scarce and was invaluable in evaluating the detection performance of two candidate target detection approaches. Based on the collected data, our detection approaches were able to detect targets at distances ranging from 400 to about 900 m. These distances (with some assumptions about closing speeds and aircraft trajectories) translate to an advance warning of between 8 and 10 s ahead of impact, which approaches the 12.5‐s response time recommended for human pilots. We overcame the challenge of achieving real‐time computational speeds by exploiting the parallel processing architectures of graphics processing units (GPUs) found on commercial‐off‐the‐shelf graphics devices. Our chosen GPU device suitable for integration onto UAV platforms can be expected to handle real‐time processing of 1,024 × 768 pixel image frames at a rate of approximately 30 Hz. Flight trials using manned Cessna aircraft in which all processing is performed onboard will be conducted in the near future, followed by further experiments with fully autonomous UAV platforms. © 2010 Wiley Periodicals, Inc.     

Metrics for shot boundary detection in digital video sequences

The detection of shot boundaries in video sequences is an important task for generating indexed video databases. This paper provides a comprehensive quantitative comparison of the metrics that have been applied to shot boundary detection. In addition, several standardized statistical tests that have not been applied to this problem, as well as three new metrics, are considered. A mathematical framework for quantitatively comparing metrics is supplied. Experimental results based on a video database containing 39,000 frames are included.