Motor,Visual and Emotional Deficits in Mice after Closed-Head Mild Traumatic Brain Injury Are Alleviated by the Novel CB2 Inverse Agonist SMM-189

We have developed a focal blast model of closed-head mild traumatic brain injury (TBI) in mice. As true for individuals that have experienced mild TBI, mice subjected to 50–60 psi blast show motor, visual and emotional deficits, diffuse axonal injury and microglial activation, but no overt neuron loss. Because microglial activation can worsen brain damage after a concussive event and because microglia can be modulated by their cannabinoid type 2 receptors (CB2), we evaluated the effectiveness of the novel CB2 receptor inverse agonist SMM-189 in altering microglial activation and mitigating deficits after mild TBI. In vitro analysis indicated that SMM-189 converted human microglia from the pro-inflammatory M1 phenotype to the pro-healing M2 phenotype. Studies in mice showed that daily administration of SMM-189 for two weeks beginning shortly after blast greatly reduced the motor, visual, and emotional deficits otherwise evident after 50–60 psi blasts, and prevented brain injury that may contribute to these deficits. Our results suggest that treatment with the CB2 inverse agonist SMM-189 after a mild TBI event can reduce its adverse consequences by beneficially modulating microglial activation. These findings recommend further evaluation of CB2 inverse agonists as a novel therapeutic approach for treating mild TBI.     

The role of the vapour phase in fluid coker cyclone fouling: Part 2. Liquid and vapour yields and compositions

The vapours derived from thermally cracked Athabasca bitumen were exposed to temperatures phase 490°C and 560°C in order to investigate the effects of vapour phase thermal cracking on product yields and campositiom. Raising the vapour phase temperature above the temperature at which the vapours were derived increased both the yield of non‐condensable vapours and the amount of olefins in the produced gas. In addition, the liquid yield decreased with increasing vapour phase temperature and changes in liquid product composition were also observed. The H/C ratio of the liquid product decreased with increasing vapour phase temperature.     

Ion exchange of alkali metal cations with an inorganic resin

A comparison of the ion exchange properties of the inorganic resin Isolute SCX-2 with alkali metal cations, including francium, to the organic Dowex 50X8 resin is presented. The purpose of this study was to investigate the ion exchange properties of the alkali metal cations with a resin containing a less hydrophobic backbone structure. It was found that the less hydrophobic Isolute SCX-2 resin had a smaller range of values for the distribution coefficients when exchanged with the alkali metals than Dowex 50X8.     

Catalytic Dry Reforming of Methane on Ruthenium-Doped Ceria and Ruthenium Supported on Ceria

Two types of Ru–ceria catalysts were investigated, one prepared by combustion to create an atomically doped metal oxide, and the other, prepared by impregnation, as supported Ru oxide. They have different physical properties (as measured by X-ray photoelectron spectroscopy, X-ray diffraction, and Infrared spectra of adsorbed CO) but identical catalytic activity for dry reforming of methane. We show that the catalyst for dry reforming is partially reduced using XPS and IR spectroscopy. Furthermore, transient oxidation reaction spectroscopy with oxygen pulses confirms partial reduction of the catalyst is necessary for dry reforming activity.     

Platelet-derived growth factor-BB and thrombin activate phosphoinositide 3-kinase and protein kinase B: role in mediating airway smooth muscle proliferation

Proliferation of airway smooth muscle results from persistent inflammatory cytokine and growth factor stimulation and is a critical component of airway luminal narrowing in chronic asthma. Using primary cultures of bovine tracheal smooth muscle (BTSM) cells to examine the signaling basis of cell proliferation, platelet-derived growth factor (PDGF)-BB and thrombin (which act through distinct receptor types) were found to induce DNA synthesis in BTSM cells. Mitogen-induced DNA synthesis could be completely inhibited by LY294002, a selective phosphoinositide 3-kinase (PtdIns 3-kinase) inhibitor. Exposure of BTSM cells to PDGF-BB or thrombin resulted in rapid activation of PtdIns 3-kinase and accumulation of phosphoinositide-3,4,5-trisphosphate. Protein kinase B, a novel signaling protein kinase, was identified in BTSM cells and was activated by PDGF-BB and thrombin in a PtdIns 3-kinase-dependent manner; this may underlie mitogen-stimulated activation of p70(s6k). PD98059, a mitogen-activated protein kinase kinase 1 inhibitor, also partially inhibited PDGF-BB- and thrombin-stimulated DNA synthesis, indicating a modulatory role for mitogen-activated protein kinase in proliferation. GF109203X, Ro 31-8220, calphostin C, and chelerythrine (selective protein kinase C inhibitors) had no effect on PDGF-BB- or thrombin-stimulated DNA synthesis, suggesting that, despite abolishment of mitogen-stimulated protein kinase C activity, cell proliferation stimulated by PDGF-BB and thrombin is protein kinase C-independent. These data demonstrate that the PtdIns 3-kinase/protein kinase B pathway represents a key signaling route in airway smooth muscle proliferation, with the mitogen-activated protein kinase kinase 1/mitogen-activated protein kinase cascade providing a complementary signal required for the full mitogenic response.     

Suspension polymerization of itaconic acid diesters

Dimethyl itaconate and dicyclohexyl itaconate monomers are polymerized successfully for the first time via suspension polymerization. The obtained polymers possess significantly higher molecular weights and more narrow polydispersities compared to itaconate polymers prepared in solution or in bulk. The yields of these polymers from the suspension process are higher than the polymers synthesized from bulk. Solution cast films of both polymers were too brittle for mechanical properties characterization. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46417.     

Frontal polymerization accelerated by continuous conductive elements

Frontal polymerization (FP), a propagating reaction wave driven by exothermic polymerization, is increasingly considered for the rapid fabrication of fiber-reinforced composites. However, the effect of the fibers on the FP reaction has not yet been explored. In this contribution, we demonstrate that thermally conductive continuous elements accelerate FP using an experimental model system and finite-element-based numerical simulations. Furthermore, the degree of acceleration is shown to be affected by the amount of available monomer in the system. These results suggest that thermally conductive carbon fiber reinforcement may facilitate FP for composite manufacturing. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47418.     

Effect of areal density and fiber orientation on the deformation of thermomechanical bonds in a nonwoven fabric

This study proposes a novel method to mechanically characterize the performance of individual bonds in low‐density, thermomechanically bonded nonwoven fabrics. Commercial bicomponent, polyethylene/polypropylene (PE/PP), nonwoven fabric was laser cut into bowtie‐shaped specimens for uniaxial tensile testing so that the central region of each specimen contained an individual bond. Three groups, each composed of 20 specimens, were tested with their longitudinal axes oriented along the machine direction (MD), the cross direction (CD), and at 45° between these two directions (DD). Prior to testing, the intrinsic variation in areal density and fiber orientation in the region surrounding the individual bond were quantified via orientation and relative basis weight parameters. During testing, images of the specimens were acquired to determine the occurrence of fiber breakage, bond deformation, and bond cohesive failure. Maximum force, stiffness, and orientation parameters were found to be significantly different among the three specimen groups (p < 0.01) but the relative basis weight was not (p > 0.01). The stiffness and maximum load were linearly correlated with both the areal density and fiber orientation. Pre‐existing voids or windows within the bond lowered the maximum force for specimens with the longitudinal axes aligned with the MD. These voids had no influence on the maximum force achieved by the specimens aligned with the CD and DD. The bonds in these specimens were observed to deform less than the bonds in the specimens with the longitudinal axes aligned with the MD. The results indicate the importance of the fiber structure surrounding the bond on the tensile properties, deformation and failure mode of individual bonds within the nonwoven fabric. POLYM. ENG. SCI., 59:311–322, 2019. © 2018 Society of Plastics Engineers     

Reciprocal modulation of the binding of angiotensin agonists and antagonists to angiotensin receptors in smooth muscle

1. Direct ligand binding studies have shown that the agonist 125I-[Sar1]Ang II and the antagonist 125I-[Sar1Ile8]Ang II bind to bovine uterus smooth muscle membranes in a time-dependent, reversible and saturable manner; both ligands had the same number of high affinity sites. 2. [Sar1Ile8]Ang II inhibited the binding of 125I-[Sar1]Ang II in a non-competitive manner by decreasing the number of high affinity sites without changing the binding affinity of the radioligand. 3. [Sar1]Ang II also inhibited the binding of 125I-[Sar1Ile8]Ang II in a non-competitive manner. 4. Dissociation of both radioligands from their receptor sites was fast enough that pseudo irreversible occupancy of the binding sites could not account for the observed non-competitive inhibition. 5. Displacement studies using 125I-[Sar1Ile8]Ang II as the radioligand provided evidence for the existence of two binding sites when the displacing ligand was [Sar1]Ang II but not when the displacing ligand was [Sar1Ile8]Ang II. 6. GTPS gamma S had no discernible effect on the binding of either 125I-[Sar1]Ang II or 125I-[Sar1Ile8]Ang II to bovine uterine membranes. 7. The present findings are consistent with an allosteric mechanism of antagonism for [Sar1Ile8]Ang II. The data are also consistent with a mechanism wherein agonist and antagonist ligands occupy different binding modes at the same receptor site and induce long-term conformational changes in the receptor which are idiosyncratic with respect to the nature of the ligand. An emerging relationship between the actions of angiotensin peptides and non-peptide mimetics of angiotensin is presented.     

Boosting the Efficiency of Perovskite Solar Cells with CsBr‐Modified Mesoporous TiO2 Beads as Electron‐Selective Contact

Rapid extraction of photogenerated charge carriers is essential to achieve high efficiencies with perovskite solar cells (PSCs). Here, a new mesoscopic architecture as electron‐selective contact for PSCs featuring 40 nm sized TiO₂ beads endowed with mesopores of a few nanometer diameters is introduced. The bimodal pore distribution inherent to these films produces a very large contact area of 200 m² g^?1 whose access by the perovskite light absorber is facilitated by the interstitial voids between the particles. Modification of the TiO₂ surface by CsBr further strengthens its interaction with the perovskite. As a result, photogenerated electrons are extracted rapidly producing a very high fill factor of close to 80% a V_OC of 1.14 V and a PCE up to 21% with negligible hysteresis.