Nonsanction seat belt law enforcement: a modern day tale of two cities

This paper describes the implementation and evaluation of a nonsanction seat belt law enforcement program in two experimental communities of contrasting size in a state with a mandatory belt law. The main ingredients of the program were seat belt "salutes," public information and education, and limited use of inexpensive economic incentives. Driver shoulder belt use data collected before, during, and after the experimental programs, compared to similar data collected in a comparison community, showed the approach to be effective. While standard seat belt enforcement activities without incentives have been shown to be effective, many police departments, especially in smaller communities, are reluctant to make wholesale increases in seat belt citations. Although requiring some additional level of manpower and resources, a nonsanction approach to seat belt law enforcement can provide an alternate way of increasing belt use in these communities.     

Effect of multiple sclerosis materials on polymorphonuclear neutrophils of mice

Necrotizing enterocolitis (NEC) usually occurs in low birth weight infants who have had perinatal stress, and the mortality remains significant. There are a few reports of NEC in the postoperative period, especially in young infants. Nine neonates developed NEC following operations and form the basis of this report. The interval between operation and the diagnosis of NEC varied from 3 days to 4 mo. The surgical lesions included one case each of esophageal atresia, tetralogy of Fallot, supralevator rectal atresia with rectourethral fistula, and multiple intestinal atresias. Three babies had gastroschisis and two had "apple peel" intestinal atresia. Only 3 of the 9 survived. The usual clinical findings of NEC, abdominal distention, bile stained gastric residuals and diarrhea (with or without blood), can occur in the postoperative period without NEC and are, therefore, not reliable diagnostic signs. Significant changes in the clinical course of these babies occurred from 7 hr to 5 days before the diagnosis was established. In these patients the roentgen findings that established the diagnosis of NEC included intestinal ileus, pneumatosis intestinalis, and portal vein gas. Pneumatosis intestinalis and portal vein gas were the most reliable diagnostic signs, but appeared relatively late in the course of the disease. In one case pneumatosis was seen only in retrospect. None of the patients had definite pneumoperitoneum. Awareness of NEC as a potential postoperative complication may result in early recognition, treatment and survival.     

Design of an adaptive self-organizing fuzzy neural network controller for uncertain nonlinear chaotic systems

Though the control performances of the fuzzy neural network controller are acceptable in many previous published papers, the applications are only parameter learning in which the parameters of fuzzy rules are adjusted but the number of fuzzy rules should be determined by some trials. In this paper, a Takagi–Sugeno-Kang (TSK)-type self-organizing fuzzy neural network (TSK-SOFNN) is studied. The learning algorithm of the proposed TSK-SOFNN not only automatically generates and prunes the fuzzy rules of TSK-SOFNN but also adjusts the parameters of existing fuzzy rules in TSK-SOFNN. Then, an adaptive self-organizing fuzzy neural network controller (ASOFNNC) system composed of a neural controller and a smooth compensator is proposed. The neural controller using the TSK-SOFNN is designed to approximate an ideal controller, and the smooth compensator is designed to dispel the approximation error between the ideal controller and the neural controller. Moreover, a proportional-integral (PI) type parameter tuning mechanism is derived based on the Lyapunov stability theory, thus not only the system stability can be achieved but also the convergence of tracking error can be speeded up. Finally, the proposed ASOFNNC system is applied to a chaotic system. The simulation results verify the system stabilization, favorable tracking performance, and no chattering phenomena can be achieved using the proposed ASOFNNC system.     

Electrochemical oxidation of manganese(II) at a platinum electrode

Electrochemical oxidation of Mn²⁺ in sulphuric acid to form MnO₂ was studied using stationary and rotating platinum/platinum ring-disc electrodes. It appears that nucleation of MnO₂ is governed by an equilibrium involving a Mn(III) intermediate. Growth of MnO₂ involves the reduction of MnO₂ surfaces by Mn²⁺ ions in the solution to form MnOOH intermediates. The subsequent electrochemical oxidation of MnOOH releases a hydrogen ion and results in the formation of MnO₂. The rate constant of MnOOH oxidation to MnO₂ was estimated to be 40 s^–1. With a sufficient supply of Mn²⁺ ions, a layer of MnOOH is built up and the in-solid diffusion of hydrogen ions becomes the ratedetermining-step. With a low Mn²⁺ concentration, diffusion of Mn²⁺ ions from bulk electrolyte to the MnO₂/electrolyte interface is a factor controlling the growth of MnO₂. The activation energy and the pre-exponential term of the diffusion coefficient of Mn²⁺ in 0.5m sulphuric acid were determined to be 44.8 kJ mol^–1 and 100 cm² s^–1, respectively.     

Frontal EMG-biofeedback training of athetoid cerebral palsy patients: a report of six cases

108 tendons of the m. extensor hallucis longus were examined with a tensile testing machine within 36 h after death. The specimen were kept at a resting length of 20 mm. After the "steady state" was reached by cyclic loading, the tendons were stretched up to a maximum load of 18 kp, then deloaded to a certain level and after that the elongation was kept constant. At high loading level the tension of the tendon decreases with time (relaxation). At medium and low loading level the tension increases slightly (mechanical recovery). Between that two regions there is a certain load, where the tension will not change with time (isorheological point). The position of the isorheological point depends on the velocity of the elongation. At low velocity (2 mm/min) the isorheological point is situated at 70%, at high velocity (12 mm/min) at 60% of the maximum load. One will find the maximum relaxation, when no deloading occurs. The mechanical recovery, however, has its maximum at 5--25% of the maximum load. But when the tendon is totally deloaded, there seems to occur no recovery. The maximum relaxation is 5 to 6 times larger than the maximum recovery. Supposingly the relaxation- and recovery-processses will happen at the same time but with different intensity depending on the loading level. At least the relaxation-process consists of different relaxation components with different relaxation times. This will explain the phenomenon of a "secondary relaxation": After a long time of registration the recovery will turn into a slight relaxation.     

Development of Virtual Simulation System for Remote Collaborative Surface Machining

1 Introduction Many parts of aerospace ,automobile and mold industries are high precision and complex-shaped. There-fore ,it needs multi-axis machining. Multi-axis machining has advantages of i mproving efficiency and surfaceprecision,reducing production expense and shortening ti me to market . Although there are many advantages inmulti-axis machining,there are many steps on process planningfor complexsurface .And every step needs engi-neers to make appropriate decisions by their professional…     

GaAsSb/InAlAs PA DHBTs Grown by Production MBE

The epi material growth of GaAsSb based DHBTs with InAlAs emitters are investigated using a 4 × 100mm multi-wafer production Riber 49 MBE reactor fully equipped with real-time in-situ sensors including an absorption band edge spectroscope and an optical-based flux monitor. The state-of-the-art hole mobilities are obtained from 100nm thick carbon-doped GaAsSb. A Sb composition variation of less than ± 0.1 atomic percent across a 4 × 100mm platen configuration has been achieved. The large area InAlAs/GaAsSb/InP DHBT device demonstrates excellent DC characteristics,such as BVCEO＞6V and a DC current gain of 45 at 1kA/cm2 for an emitter size of 50μm × 50μm. The devices have a 40nm thick GaAsSb base with p-doping of 4. 5 × 1019cm-3 . Devices with an emitter size of 4μm × 30μm have a current gain variation less than 2% across the fully processed 100mm wafer. ft and fmax are over 50GHz,with a power efficiency of 50% ,which are comparable to standard power GaAs HBT results. These results demonstrate the potential application of GaAsSb/InP DHBT for power amplifiers and the feasibility of multi-wafer MBE for mass production of GaAsSb-based HBTs.     

A better technique using multisegment modeling and analysis of high-density and high-speed connectors

A useful and rather new simulation technique for connectors up to 6.25 GHz is presented and discussed in this paper. The proposed model extracts electrical parameters of a connector using time-domain reflectometry (TDR) measurements. A new technique was developed to obtain accurate impedance profiles using TDR and a multisegment approach that is effectively a distributed coupled model. The parameter extraction and characterization of connectors are discussed. The performance of the proposed segmented transmission line model is verified by simulation of the model in SPICE and by experimental measurement. The results show that the proposed model can simulate the electrical characteristics, including crosstalk and impedance, of high-density and high-speed connectors with satisfactory accuracy. Based on the proposed modeling and CAD simulators, the design and analysis of complicated high-density and high-speed connectors can be executed accurately and effectively. Compared with other previous models, the proposed model can significantly improve the accuracy of simulation.     

Development of a collaborative CAD/CAM system

This paper presents the development of a collaborative CAD/CAM system (COCADCAM). COCADCAM extends an existing single-location CAD/CAM system to a multi-location CAD/CAM application so that two geographically dispersed CAD/CAM users can work together on a three-dimensional CAD-geometry coediting and CAD-related tasks collaboratively and dynamically. COCADCAM dynamically supports CAD data communication that are not available in traditional single-location CAD/CAM. The dynamic data communication is achieved through the development of networking algorithms and CAD/CAM functions in this paper. The networking algorithms based on UNIX Interprocess Communication (IPC), the Network File System (NFS), and a connection-oriented client and server model under the Transmission Control Protocol/Internet Protocol (TCP/IP) suite. The CAD/CAM functions included surface modelling, simulation of a milling toolpath, and post-processing of an NC program following collaborative CAD-geometry coediting, which are directly or indirectly supported by the Application Programming Interface (API) of the CAD/CAM software. The networking algorithms and CAD/CAM functions together can facilitate an environment for CAD-geometry coediting and related tasks such as design, analysis and manufacture. COCADCAM has been successfully implemented through local area network (LAN) and the Internet; a remote machining cell is also linked so that the generated NC program based on a coedited free-form surface can be used for the physical machining operation. The algorithm proposed by COCADCAM can be referenced for the extension of other single-location CAD/CAM systems to multi-location applications.     

Optimal Speed-Up Parallel Image Template Matching Algorithms on Processor Arrays with a Reconfigurable Bus System,

The image template matching problem is one of the fundamental problems of and has many practical applications in image processing, pattern recognition, and computer vision. It is a useful operation for filtering, edge detection, image registration, and object detection [13]. In this paper, we first design twoO[(M²/p²)log logM] andO[(M²/p²)+(M/p)log logp] time parallel image template matching algorithms on a 3-D processor array with a reconfigurable bus system usingp²N²processors with each processor containingO(1) andO(M/p) restricted memory for 1 ≤p≤M≤N, respectively, for anN×Ndigital image and anM×Mtemplate. By increasing the number of processors, these two proposed algorithms can be run inO(M²/p²) time for speeding up the time complexity usingp²M^1/cN²andp^2+1/cN²processors, respectively, wherecis a constant andc≥1. Furthermore, anO(1) time can be also obtained from these two proposed algorithms by usingM²+1^/cN²processors. These results improve the best known bounds and achieve both optimal and optimal speed-up in their time and processor complexities.